This study aimed to enhance tropical fast-growing tree species’ resistance to subterranean termite (Coptotermes curvignathus) attacks through the manufacturing of polystyrene glued-laminated timber (glulam). Three young tropical wood species, namely… Click to show full abstract
This study aimed to enhance tropical fast-growing tree species’ resistance to subterranean termite (Coptotermes curvignathus) attacks through the manufacturing of polystyrene glued-laminated timber (glulam). Three young tropical wood species, namely manii (Maesopsis eminii), mangium (Acacia mangium), and rubber-wood (Hevea brasiliensis), were cut into laminae. After drying, the laminae were impregnated with styrene monomer, then polymerized using potassium peroxydisulfate as a catalyst and heat. The polystyrene-impregnated laminae were constructed using isocyanate glue and a cold press for three-layered glulam. Untreated or control glulam and solid wood specimens were also prepared. The specimens of each wood species and wood products (solid wood, control glulam, and polystyrene glulam) were exposed to the termite in a laboratory test according to Indonesian standards. The results showed that mangium wood had better resistance to the termite attack than manii and rubber-wood, with both of those woods performing the same. Among the wood products, the glulams were equal and had higher resistance to the termite attack than solid wood. To enhance the termite resistance of polystyrene glulam, we suggest that the polymer loading of polystyrene on each lamina should be increased. In our evaluation of the products’ order of priority, polystyrene glulam emerged as performing best towards subterranean termites attack.
               
Click one of the above tabs to view related content.