LAUSR

In Situ microfibrillation is an easy and economical processing method, which has drawn wide concern in recent years. In Situ special-shaped microfibrillar composites, which with poly(lactic acid)/polyamide 6 (PA6/PLA) together formed special-shaped microfibrils in polyolefin elastomer (POE) matrix, were successfully prepared by using multistage stretching extrusion technology. Four types of PA6 with different viscosity were utilized to investigate the effect of viscosity ratio of PA6 to PLA on the structure evolution of special-shaped microfibrils and the mechanical properties of POE/(PA6/PLA) composites. The morphological observation showed that the viscosity ratio was closely associated to the size and shape of PA6 and greatly affected the microfibrillar morphology of PLA/PA6. When the viscosity ratio of PA6 to PLA was less than 2.2, the “gourd-skewers-like” structure microfibrils were obtained. When the viscosity ratio of PA6/PLA to 14.2 was further increased, the “trepang” structure microfibrils were dominant. The “gourd skewers” structure microfibrils were favorable to improvement the tensile strength, Young’s modulus, and viscoelastic properties of POE/(PA6/PLA) blends compared to the “trepang” structure microfibrils. In addition, the morphology of microfibrils exhibited a negligible effect on the melting and crystallization temperature and crystallization degree of PLA and POE matrix. This work provides a new strategy for designing the in situ special-shaped microfibrillar composites with improved mechanical properties.