LAUSR

This research work has been carried out to investigate the application of the Model Predictive Control Toolbox contained in MATLAB in controlling a reactive distillation process used for the production of a biodiesel, the model of which was obtained from the work of Giwa et al.1. The optimum values of the model predictive control parameters were obtained by running the mfile program written for the implementation of the control simulation varying the model predictive control parameters (control horizon and prediction horizon) and recording the corresponding integral squared error (ISE). Thereafter, using the obtain optimum value of 5 and 15 for control horizon and prediction horizon respectively as well as a manipulated variable rate weight of 0.025 and an output variable rate weight of 1.10, various steps were applied to the setpoint of the controlled variable and the responses plotted. The results given by the simulations carried out by varying the model predictive control parameters (control horizon and prediction horizon) for the control of the system revealed that optimizing the control parameters is better than arbitrary choosing. Also, the simulation of the developed model predictive control system of the process showed that its performance was better than those used to control the same process using a proportional-integral-derivative (PID) controller tuned with Cohen-Coon and Ziegler-Nichols techniques. It has, thus, been discovered that the Model Predictive Control Toolbox of MATLAB can be applied successfully to control a reactive distillation process in order to obtain better performance than that obtained from a PID controller tuned with Cohen-Coon and Ziegler-Nichols methods.