LAUSR

A new way to remove the intense heat by developing and implementing an innovative low cost compact loop thermosyphon has been widely observed. Especially, it was concluded that nano-fluids are potential heat transfer fluids to be used as working fluid in thermosyphon. Therefore, the thermophysical or transport properties of nano-fluids in thermosyphon need to be discussed. In present work was to experimental study the thermal performance of thermosyphon using a copper nano-fluid as a working fluid. The experiment was performed in order to measure the temperature distribution and compare heat transfer rate of the thermosymphon with nano-fluid and with pure water. The concentration of copper nano-particle was 10, 30 and 50 ppm. The tested working temperature was 60, 70 and 80C. Results shown that the concentration of 50 ppm of copper nano-fluid improved thermal performance compared with the case of pure water. The optimum and behavior of copper nano-fluid in thermosyphon is presented, which highlights all of the beforehand mentioned advantages.