LAUSR

Modern duplex stainless steels have been in use since the early 1970s and cast versions of the wrought alloys were soon in demand for pumps and valves. Since that time a range of cast duplex stainless steels have been developed with a wide range of compositions, but all with approximately 50/50 austenite/ferrite phase balance and deliberate additions of nitrogen. This paper presents some comparative corrosion data on a range of cast duplex stainless steels, mainly in seawater. The differences in performance related to composition and microstructure are discussed. Corrosion data in lower chloride brines are also presented to show the limits of use of some lower alloyed duplex materials. In addition to oxidizing chloride solutions, some data are presented on cast duplex stainless steels in reducing brines containing H2S, where the main corrosion problem is sulfide stress corrosion cracking. Finally, the importance of using a suitable technical specification, over and above ASTM, combined with selecting a suitably skilled foundry in order to obtain satisfactory castings is discussed.