Microstructural Stability During Creep Exposure of 9Cr-1Mo Steel Treated at Different Normalization Temperatures
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-019-04074-3
Abstract: A modified 9Cr-1Mo steel has been exposed to three separate austenitization temperatures, i.e., at 950, 1025, and 1100 °C for normalization. After subsequent tempering at 750 °C, the normalized and tempered samples were creep-tested at temperatures of… read more here.
Keywords: creep; normalization; 9cr 1mo; 1mo steel ... See more keywords
Flow Behaviour of Modified 9Cr–1Mo Steel at Elevated Temperatures
Sign Up to like & getrecommendations! Published in 2017 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-017-1047-4
Abstract: In this investigation, the flow behaviour of modified 9Cr–1Mo steel at elevated temperatures is reported. To understand the flow behaviour of the steel, tensile tests were performed at nominal strain rate of 3 × 10−3 s−1 and… read more here.
Keywords: 9cr 1mo; behaviour modified; flow behaviour; steel ... See more keywords
Comparison of Mechanical and Metallurgical Properties of Modified 9Cr–1Mo Steel for Conventional TIG and A-TIG Welds
Sign Up to like & getrecommendations! Published in 2019 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-019-01657-5
Abstract: This work attempts to investigate the effect of flux activation on mechanical and metallurgical properties of modified 9Cr–1Mo steel during activated TIG (A-TIG) welding. Composition-based oxide flux MnO2 was identified to produce a 6-mm-thick square-groove… read more here.
Keywords: 9cr 1mo; mechanical metallurgical; tig tig; steel ... See more keywords
Dispersion of complex carbides at the oxidation front during the oxidation of 9Cr-1Mo steel
Sign Up to like & getrecommendations! Published in 2020 at "Corrosion Science"
DOI: 10.1016/j.corsci.2019.108389
Abstract: Abstract To better understand oxidation and carburisation processes taking place during exposure of 9Cr-1Mo steel experimental samples have been exposed at 600 °C and 620 °C to a CO2 rich atmosphere for various exposure times. Complex multi-elemental… read more here.
Keywords: oxidation; dispersion complex; oxidation front; 9cr 1mo ... See more keywords
Microstructure, corrosion and mechanical properties characterization of AISI type 316L(N) stainless steel and modified 9Cr-1Mo steel after 40,000 h of dynamic sodium exposure at 525 °C
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Nuclear Materials"
DOI: 10.1016/j.jnucmat.2019.01.012
Abstract: Abstract This paper presents results of a comprehensive study on 316L(N) stainless steel (SS) and modified 9Cr-1Mo steel exposed to flowing sodium at 525 °C for 40,000 h in a bi-metallic (BIM) loop. A non-uniform ferrite layer… read more here.
Keywords: 1mo steel; steel; 9cr 1mo; 316l stainless ... See more keywords
Fatigue life estimation of notched specimens of modified 9Cr-1Mo steel under uniaxial cyclic loading
Sign Up to like & getrecommendations! Published in 2017 at "Materials at High Temperatures"
DOI: 10.1080/09603409.2017.1308084
Abstract: Abstract Accuracy in the estimation of low cycle fatigue life of modified 9Cr-1Mo steel notched specimen by different analytical methods such as linear rule, Neuber’s rule, strain energy density method and numerical method such as… read more here.
Keywords: fatigue life; notched specimens; 1mo steel; 9cr 1mo ... See more keywords
A study of breakaway oxidation of 9Cr–1Mo steel in a Hot CO2 atmosphere using Raman spectroscopy
Sign Up to like & getrecommendations! Published in 2018 at "Materials at High Temperatures"
DOI: 10.1080/09603409.2017.1389424
Abstract: Abstract The microstructure of the oxide scale and parent metal in ferritic 9Cr–1Mo steel was observed to explore the oxidation and carburisation mechanisms upon exposure to a CO2 gas environment at high temperature and high… read more here.
Keywords: oxidation; steel; co2; spectroscopy ... See more keywords