Strain-Induced Refinement and Extension of Solubility in Cu-1Cr-0.1Zr (wt.%) Alloy Subjected to Surface Mechanical Attrition Treatment
Sign Up to like & getrecommendations! Published in 2019 at "JOM"
DOI: 10.1007/s11837-019-03735-x
Abstract: Cu-1Cr-0.1Zr (wt.%) alloy has been subjected to surface mechanical attrition treatment (SMAT). The strain-induced microstructure evolution, including the grain refinement and extension of the solubility between copper and chromium particles, was examined using transmission electron… read more here.
Keywords: 1cr 1zr; alloy subjected; microscopy; subjected surface ... See more keywords
A Dynamic Recrystallization (DRX) Constitutive Model for Elevated Temperature Flow Behavior of Cu-0.5Cr-0.1Zr Alloy
Sign Up to like & getrecommendations! Published in 2018 at "Metallography, Microstructure, and Analysis"
DOI: 10.1007/s13632-018-0502-x
Abstract: AbstractIn order to obtain the high-temperature flow behavior of Cu-0.5Cr-0.1Zr alloy more accurately, the hot compression test of Cu-0.5Cr-0.1Zr alloy was performed at the strain rates from 0.001 to 1.0 s−1 and the deformation temperatures from… read more here.
Keywords: alloy; temperature; 5cr 1zr; dynamic recrystallization ... See more keywords
Formation mechanism of stable NbC carbide phase in Nb-1Zr-0.1C (wt.%) alloy
Sign Up to like & getrecommendations! Published in 2018 at "Acta Materialia"
DOI: 10.1016/j.actamat.2017.11.007
Abstract: Abstract In the present work, several long standing issues related to the formation of various carbides and transformation of Nb 2 C→NbC carbide in Nb-1Zr-0.1C alloy have been addressed. For this purpose, samples were processed… read more here.
Keywords: nbc carbide; phase; solidified samples; formation ... See more keywords
On the evolution of β' precipitate during creep in a Mg–3.3Y–0.1Zr(at.%) alloy
Sign Up to like & getrecommendations! Published in 2019 at "Materials Characterization"
DOI: 10.1016/j.matchar.2018.11.028
Abstract: Abstract The evolution of β' precipitate in a Mg–3.3Y–0.1Zr (at.%) alloy before and after creep at 300 °C under 50/70 MPa was comprehensively studied using high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). Before creep, β' precipitates… read more here.
Keywords: precipitate; creep; evolution precipitate; alloy ... See more keywords
Microstructure stability and tensile properties of Cu-3Ag-1Zr alloy fabricated by rapid solidification and cold rolling
Sign Up to like & getrecommendations! Published in 2020 at "Materials Characterization"
DOI: 10.1016/j.matchar.2019.110091
Abstract: Abstract A Cu-3Ag-1Zr alloy was fabricated by rapid solidification and cold rolling. The microstructure stability and tensile properties of this alloy after isochronal annealing at 350–900 °C were investigated. The results show that the microstructure of… read more here.
Keywords: alloy fabricated; 3ag 1zr; 1zr alloy; stability ... See more keywords
Influence of strain rates on high temperature deformation behaviors and mechanisms of Ti-5Al-5Mo-5V-3Cr-1Zr alloy
Sign Up to like & getrecommendations! Published in 2021 at "Materials Characterization"
DOI: 10.1016/j.matchar.2020.110794
Abstract: Abstract In this work, isothermal compression tests of Ti-5Al-5Mo-5 V-3Cr-1Zr alloy under strain rates from 0.01 s−1 to 1 s−1 at 900 °C was carried out. With the increasing strain rate, the flow stress increased and the thickness of… read more here.
Keywords: deformation; 1zr alloy; strain; 5mo 3cr ... See more keywords