Effect of the Deformation Amount on the Microstructure and Tensile Properties of 304 Stainless Steel with 2 wt% Al Content by Cold Rolling
Sign Up to like & getrecommendations! Published in 2020 at "steel research international"
DOI: 10.1002/srin.201900585
Abstract: The microstructure evolution during cold rolling and mechanical properties after solution treatment of 304 stainless steel with 2 wt% Al are investigated and the tensile properties of the steels are also tested. The results show that… read more here.
Keywords: tensile properties; steel; cold rolling; 304 stainless ... See more keywords
Transformation of Oxide Inclusions in Type 304 Stainless Steels during Heat Treatment
Sign Up to like & getrecommendations! Published in 2017 at "Metallurgical and Materials Transactions B"
DOI: 10.1007/s11663-017-1007-8
Abstract: Heat treatment of Type 304 stainless steel in the range of 1273 K (1000 °C) to 1473 K (1200 °C) can transform manganese silicate inclusions to manganese chromite (spinel) inclusions. During heat treatment, Cr reacts with manganese silicate to… read more here.
Keywords: type 304; heat treatment; 304 stainless; transformation ... See more keywords
Characterization of Hydrophobic Silane Film Deposited on AISI 304 Stainless Steel for Corrosion Protection
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-019-04349-9
Abstract: This present study was conducted to determine the aptitude of hydrophobic silane coating in corrosion resistance of AISI 304 stainless steel substrate at the nanoscale. Three newly developed hydrophobic silane-based compounds of compositions, namely [tris(trimethylsiloxy)silyethyl]dimethylchlorosilane… read more here.
Keywords: silane; aisi 304; hydrophobic silane; stainless steel ... See more keywords
Effect of Photoelectrochemical Activity of ZnO-Graphene Thin Film on the Corrosion of Carbon Steel and 304 Stainless Steel
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-020-04579-2
Abstract: In this research, the ZnOG hybrid thin film was produced via solgel method. The surface morphology, band gap and photoactive properties of the films were studied by means of SEM, UV–Vis and photoluminescence analysis. In… read more here.
Keywords: 304 stainless; steel 304; thin film; carbon steel ... See more keywords
Reliable N-type Mg3.2Sb1.5Bi0.49Te0.01/304 stainless steel junction for thermoelectric applications
Sign Up to like & getrecommendations! Published in 2020 at "Acta Materialia"
DOI: 10.1016/j.actamat.2020.07.058
Abstract: Abstract Mg3Sb2-based materials possess promising thermoelectric performances, however, probably poor interfacial behaviors when connected with the metal electrodes due to the strong chemical activity and volatility of the element Mg. In this paper, a high… read more here.
Keywords: stainless steel; 304 stainless; 2sb1 5bi0; mg3 2sb1 ... See more keywords
Study on the photocathodic protection of 304 stainless steel by Ag and In2S3 co-sensitized TiO2 composite
Sign Up to like & getrecommendations! Published in 2020 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2019.145088
Abstract: Abstract The photo-catalytic activity of TiO2 was greatly enhanced by co-sensitization with Ag and In2S3, and its application to protect 304 stainless steel from corrosion was reported. TiO2 nanotube arrays (TiO2 NTAs,) with large specific… read more here.
Keywords: 304 stainless; in2s3 sensitized; sensitized tio2; stainless steel ... See more keywords
Preparation of intricate nanostructures on 304 stainless steel surface by SiO2-assisted HF etching for high superhydrophobicity
Sign Up to like & getrecommendations! Published in 2020 at "Colloids and Surfaces A: Physicochemical and Engineering Aspects"
DOI: 10.1016/j.colsurfa.2019.124287
Abstract: Abstract In this work, superhydrophobic surfaces were successfully fabricated on 304 stainless steel via a novel one-step etching and low-cost stearic acid modification treatment. After SiO2-assisted HF etching at room temperature and disposal of reducing… read more here.
Keywords: stainless; surface; stainless steel; 304 stainless ... See more keywords
Optimization of resistance spot brazing process parameters in AHSS and AISI 304 stainless steel joint using filler metal
Sign Up to like & getrecommendations! Published in 2019 at "Defence Technology"
DOI: 10.1016/j.dt.2019.03.005
Abstract: Abstract The aim of this research study was to determine optimal resistance spot brazing parameters for joining between AHSS and AISI 304 stainless steel by using filler metal. The key parameters investigated in this study… read more here.
Keywords: aisi 304; stainless steel; resistance spot; ahss aisi ... See more keywords
Influence of surface modifications by laser shock processing on the acid chloride stress corrosion cracking susceptibility of AISI 304 stainless steel
Sign Up to like & getrecommendations! Published in 2018 at "Engineering Failure Analysis"
DOI: 10.1016/j.engfailanal.2018.04.045
Abstract: Abstract The effects of laser shock processing (LSP) on stress corrosion cracking (SCC) behavior of AISI 304 stainless steel have been investigated using slow strain rate tests (SSRT) in acid chloride solution. Modifications of surface… read more here.
Keywords: corrosion cracking; aisi 304; stress corrosion; stainless steel ... See more keywords
Failure analysis of a 304 stainless steel heat exchanger in liquid sulfur recovery units
Sign Up to like & getrecommendations! Published in 2020 at "Engineering Failure Analysis"
DOI: 10.1016/j.engfailanal.2020.104729
Abstract: Abstract Failure of a 304 stainless steel (304 SS) tube used as a steam heater in a liquid sulfur recovery unit was investigated by using various characterizing techniques. The investigation revealed the outer wall of… read more here.
Keywords: stainless steel; failure; 304 stainless; heat exchanger ... See more keywords
ZnPc/TiO2 composites for photocathodic protection of 304 stainless steel
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Electroanalytical Chemistry"
DOI: 10.1016/j.jelechem.2019.113802
Abstract: Abstract ZnPc/TiO2 composites were synthesized by a drop-coating method and used as photoanodes for photocathodic protection to slow the corrosion of 304 stainless steel (304SS). TiO2 is a wide-band-gap (3.2 eV) conductor that only absorbs UV… read more here.
Keywords: tio2; znpc tio2; tio2 composites; photocathodic protection ... See more keywords