Effect of Drawing Strain on Development of Martensitic Transformation and Mechanical Properties in AISI 304L Stainless Steel Wire
Sign Up to like & getrecommendations! Published in 2017 at "Steel Research International"
DOI: 10.1002/srin.201600423
Abstract: AISI 304L stainless steel wires are cold drawn to different strains for examining the effect of plastic deformation on the mechanical properties change, the microstructural evolution, and martensitic transformation. Microstructures of drawn wires are characterized… read more here.
Keywords: aisi 304l; wire; transformation; strain ... See more keywords
Effects of U‐Bending on Pitting Corrosion of 304L Stainless Steel
Sign Up to like & getrecommendations! Published in 2020 at "Steel Research International"
DOI: 10.1002/srin.202000328
Abstract: The influence of cold U‐bending on pitting corrosion of 304L stainless steel in an acidic NaCl solution was investigated using surface analyses and electrochemical measurements. The pitting behaviour of the exterior and interior surfaces of… read more here.
Keywords: bending pitting; pitting corrosion; corrosion 304l; corrosion ... See more keywords
Corrosion properties of 304L stainless steel made by directed energy deposition additive manufacturing
Sign Up to like & getrecommendations! Published in 2019 at "Corrosion Science"
DOI: 10.1016/j.corsci.2019.02.029
Abstract: Abstract The impact of microstructure and processing defects of directed energy deposition (DED) 304L stainless steel on its corrosion behavior was investigated. Materials produced by DED with heat inputs of 0.45 and 0.03 kJ/mm were compared… read more here.
Keywords: directed energy; stainless steel; energy deposition; corrosion ... See more keywords
Tribocorrosion behaviors of multilayer PVD DLC coated 304L stainless steel in seawater
Sign Up to like & getrecommendations! Published in 2017 at "Diamond and Related Materials"
DOI: 10.1016/j.diamond.2017.09.002
Abstract: Abstract The multilayer DLC coating was successfully fabricated on the surface of 304L stainless steel and silicon wafers by unbalanced magnetron sputtering technology. The tribocorrosion tests were carried out in a triboelectrochemical cell using a… read more here.
Keywords: dlc coating; multilayer dlc; stainless steel; dlc ... See more keywords
Weld solidification cracking in a 304L stainless steel water tank
Sign Up to like & getrecommendations! Published in 2020 at "Engineering Failure Analysis"
DOI: 10.1016/j.engfailanal.2020.104614
Abstract: Abstract Type 304L stainless steel alloy is known to be highly resistant to solidification cracking. In the present case the particular design of the welded seams in a simple 200 litre water tank, along with… read more here.
Keywords: water tank; stainless steel; cracking 304l; solidification cracking ... See more keywords
The effect of post-processing operations on mechanical characteristics of 304L stainless steel fabricated using laser additive manufacturing
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Materials Research and Technology"
DOI: 10.1016/j.jmrt.2021.08.142
Abstract: Abstract Metal additive manufacturing (AM) is an innovative method for fabricating products used in aerospace, automobile, and medical industries. Research on AM has been extensively conducted because AM can be applied to fabricate features and… read more here.
Keywords: stainless steel; post processing; processing; 304l stainless ... See more keywords
Evolution of tribological mechanisms of nano-grained 304L stainless steel under dry and polyalphaolefin lubrication conditions
Sign Up to like & getrecommendations! Published in 2019 at "Materials Letters"
DOI: 10.1016/j.matlet.2019.01.135
Abstract: Abstract A nano-grained structure 304L stainless steel sheet was fabricated through severe cold rolling (CR, rolling strain of 97%) and subsequently the evolution of its tribological mechanisms was firstly evaluated under dry and lubricated conditions.… read more here.
Keywords: evolution tribological; stainless steel; nano grained; tribological mechanisms ... See more keywords
Impact of hydrogen and crosshead displacement rate on the martensitic transformations and mechanical properties of 304L stainless steel
Sign Up to like & getrecommendations! Published in 2021 at "Theoretical and Applied Fracture Mechanics"
DOI: 10.1016/j.tafmec.2021.102952
Abstract: Abstract In-situ tensile testing of electrochemically hydrogen charged 304L stainless steel at different crosshead displacement rates results in a largely different elongation at fracture compared to the corresponding test in air. At slow engineering strain… read more here.
Keywords: crosshead displacement; hydrogen; stainless steel; martensitic transformations ... See more keywords
A thermo-structural manufacturing process using AISI 304L stainless steel
Sign Up to like & getrecommendations! Published in 2017 at "Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture"
DOI: 10.1177/0954405415573851
Abstract: This article presents a study of high-temperature heating of AISI 304L stainless steel to induce deformations in a manufactured part. Small square samples of AISI 304L were heated to deform a slot using an oxy-acetylene… read more here.
Keywords: aisi 304l; stainless steel; thermo structural; 304l stainless ... See more keywords
Growth of Anodic Layers on 304L Stainless Steel Using Fluoride Free Electrolytes and Their Electrochemical Behavior in Chloride Solution
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15051892
Abstract: Anodic layers have been grown on 304L stainless steel (304L SS) using two kinds of fluoride-free organic electrolytes. The replacement of NH4F for NaAlO2 or Na2SiO3 in the glycerol solution and the influence of the… read more here.
Keywords: spectroscopy; solution; growth; anodic layers ... See more keywords