Plasma additive layer manufacture smoothing (PALMS) technology – An industrial prototype machine development and a comparative study on both additive manufactured and conventional machined AISI 316 stainless steel
Sign Up to like & getrecommendations! Published in 2020 at "Additive manufacturing"
DOI: 10.1016/j.addma.2020.101204
Abstract: Abstract Additive Layer Manufacturing (ALM) of metals is rapidly changing the landscape of industrial manufacturing. Its deployment is however still hindered by extremely rough native surfaces, and drastic difficulties in efficiently applying conventional finishing methods.… read more here.
Keywords: stainless steel; additive layer; 316 stainless; aisi 316 ... See more keywords
Synergistic effect of corrosion and wear of the 316 stainless steel in molten zinc alloy at 460 °C
Sign Up to like & getrecommendations! Published in 2020 at "Corrosion Science"
DOI: 10.1016/j.corsci.2019.108411
Abstract: Abstract The failure of 316 stainless steel under tribo-corrosion in molten zinc alloy (Zn-0.2Al, wt%) at 460 °C was investigated and compared with corrosion or the sole wear. In the absence of wear, intact Fe2Al5Znx layer… read more here.
Keywords: zinc alloy; stainless steel; corrosion; steel ... See more keywords
Effect of NH4+ on the pitting corrosion behavior of 316 stainless steel in the chloride environment
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Electroanalytical Chemistry"
DOI: 10.1016/j.jelechem.2021.115368
Abstract: Abstract Statistics analysis method is used to study the corrosion process of 316 stainless steel (316 SS) in NH4+-containing environments. The pitting corrosion develops through three stages: nucleation, metastable pitting propagation and stable pitting propagation.… read more here.
Keywords: growth; pitting corrosion; stainless steel; process ... See more keywords
Effect of sliding wear and electrochemical potential on tribocorrosion behaviour of AISI 316 stainless steel in seawater
Sign Up to like & getrecommendations! Published in 2020 at "Engineering Science and Technology, an International Journal"
DOI: 10.1016/j.jestch.2020.07.004
Abstract: Abstract Sliding tribocorrosion behaviours of AISI 316 stainless steel were investigated against alumina ball in natural seawater environment (SWE) under 5 N loads. OCP (open circuit potential), potentiostatic (−1 V and 0.3 V) and potentiodynamic measurements were… read more here.
Keywords: aisi 316; stainless steel; sliding wear; tribocorrosion ... See more keywords
Impact of corrosion on the emissivity of advanced reactor structural alloys
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Nuclear Materials"
DOI: 10.1016/j.jnucmat.2018.05.047
Abstract: Abstract Under standard operating conditions, the emissivity of structural alloys used for various components of nuclear reactors may evolve, affecting the heat transfer of the systems. In this study, mid-infrared emissivities of several reactor structural… read more here.
Keywords: impact corrosion; stainless steel; structural alloys; reactor structural ... See more keywords
Microstructural characterization of cold-worked 316 stainless steel flux thimble tubes irradiated up to 100 dpa in a commercial Pressurized Water Reactor
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Nuclear Materials"
DOI: 10.1016/j.jnucmat.2020.152400
Abstract: Abstract Two flux thimble tubes (FTTs) made of 15% cold-worked 316 stainless steel (SS) were harvested from Ringhals Pressurized Water Reactor (PWR) Unit 2, with peak damages of 76 and 100 displacements per atom (dpa)… read more here.
Keywords: flux thimble; thimble tubes; cold worked; 100 dpa ... See more keywords
Preparation of titanizing coating on AISI 316 stainless steel by pack cementation to mitigate surface damage: Estimations of corrosion resistance and tribological behavior
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Physics and Chemistry of Solids"
DOI: 10.1016/j.jpcs.2019.01.029
Abstract: Abstract In this study, a titanizing coating was prepared on AISI 316 stainless steel (316 SS) using the pack cementation technique at 1173 K for 6 h. The microstructural characteristics and surface hardness of the titanizing coating… read more here.
Keywords: surface; titanizing coating; resistance; corrosion ... See more keywords
Evaluation of gamma ray attenuation properties of boron carbide (B4C) doped AISI 316 stainless steel: Experimental, XCOM and Phy-X/PSD database software
Sign Up to like & getrecommendations! Published in 2021 at "Materials Today Communications"
DOI: 10.1016/j.mtcomm.2021.102793
Abstract: Abstract This study aimed to investigate the gamma-ray attenuation properties of AISI 316 stainless steel both experimentally and theoretically by doping different ratios of boron carbide. In the experimental measurements, a gamma spectroscopy system with… read more here.
Keywords: boron carbide; aisi 316; phy psd; stainless steel ... See more keywords
Numerical insights on the spreading of practical 316 L stainless steel powder in SLM additive manufacturing
Sign Up to like & getrecommendations! Published in 2021 at "Powder Technology"
DOI: 10.1016/j.powtec.2021.05.082
Abstract: Abstract In powder bed additive manufacturing (3D printing), powder spreading plays a dominant role in determining not only the subsequent process but also the quality/performance of the printed part. Therefore, how to realize a superior… read more here.
Keywords: stainless steel; powder bed; powder; steel powder ... See more keywords
Aqueous electrophoretic deposition and corrosion protection of borate glass coatings on 316 L stainless steel for hard tissue fixation
Sign Up to like & getrecommendations! Published in 2017 at "Surfaces and Interfaces"
DOI: 10.1016/j.surfin.2017.03.010
Abstract: Abstract The present work was essentially concerned with an improvement of the biocompatibility of 316 L stainless steel (316 L SS) by coating its surface by bioactive borate glass layer using electrophoretic deposition (EPD) technique. Suspension of… read more here.
Keywords: glass; borate glass; deposition; stainless steel ... See more keywords
Experimental and theoretical investigations of benzoic acid derivatives as corrosion inhibitors for AISI 316 stainless steel in hydrochloric acid medium: DFT and Monte Carlo simulations on the Fe (110) surface
Sign Up to like & getrecommendations! Published in 2020 at "RSC Advances"
DOI: 10.1039/d0ra06742c
Abstract: The corrosion inhibition efficiencies of benzoic acid (C1), para-hydroxybenzoic acid (C2), and 3,4-dihydroxybenzoic acid (C3) have been evaluated in 0.5 M HCl toward protecting AISI 316 stainless steel (SS). read more here.
Keywords: aisi 316; stainless steel; corrosion; benzoic acid ... See more keywords