Fatigue life of 316L steel sinters of varying porosity under conditions of uniaxial periodically variable loading at a fixed stress amplitude
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Fatigue"
DOI: 10.1016/j.ijfatigue.2018.07.025
Abstract: Abstract This paper presents new test results of the fatigue life of porous 316L steel sinters with porosities of 41%, 33% and 26%, obtained in the process of powder metallurgy. Tests were performed under conditions… read more here.
Keywords: fatigue life; steel sinters; variable loading; stress ... See more keywords
Microstructure Evolution of 316L Steel Prepared with the Use of Additive and Conventional Methods and Subjected to Dynamic Loads: A Comparative Study
Sign Up to like & getrecommendations! Published in 2020 at "Materials"
DOI: 10.3390/ma13214893
Abstract: The mechanical properties and microstructure evolution caused by dynamic loads of 316L stainless steel, fabricated using the Laser Engineered Net Shaping (LENS) technique and hot forging method were studied. Full-density samples, without cracks made of… read more here.
Keywords: angle boundaries; subjected dynamic; dynamic loads; microstructure evolution ... See more keywords
Plastic Crushing Failure of Bio-Inspired Cellular Hierarchical Topological Sandwich Core
Sign Up to like & getrecommendations! Published in 2021 at "Materials"
DOI: 10.3390/ma14175040
Abstract: Bio-inspired self-similar hierarchical honeycombs are multifunctional cellular topologies used for resisting various loadings. However, the crushing behavior under large plastic deformation is still unknown. This paper investigates the in-plane compressive response of selective laser melting… read more here.
Keywords: 316l steel; bio inspired; hierarchical honeycombs; alsi10mg alloy ... See more keywords
Effect of Hydrogen on the Structure and Mechanical Properties of 316L Steel and Inconel 718 Alloy Processed by Selective Laser Melting
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15144806
Abstract: The interaction of hydrogen with specimens of 316L steel and Inconel 718 alloy processed by selective laser melting (SLM) was studied. The effect of hydrogen on the mechanical properties of SLM materials, hydrogen permeability, and… read more here.
Keywords: 718 alloy; 316l steel; hydrogen; steel inconel ... See more keywords
Construction and Validation of Simulation Models of Samples Made from 316L Steel by Applying Additive Technique
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15186244
Abstract: The main aim of the study includes research concerning the strength of samples printed out of 316L steel in the form of laminates and the creation of reflective simulation models with regard to the results… read more here.
Keywords: steel; 316l steel; simulation models; construction validation ... See more keywords
Effect of Zirconium Diboride and Titanium Diboride on the Structure and Properties of 316L Steel-Based Composites
Sign Up to like & getrecommendations! Published in 2023 at "Materials"
DOI: 10.3390/ma16010439
Abstract: The effect of zirconium diboride (ZrB2) and titanium diboride (TiB2) on the microstructure as well as the physical, mechanical, and tribological properties of composites based on 316 L steel is presented. Each reinforcing phase was… read more here.
Keywords: titanium diboride; diboride; steel; 316l steel ... See more keywords