Low cycle fatigue behavior and deformation mechanism of different microstructures in Ti-5Al-5Mo-5V-3Cr alloy
Sign Up to like & getrecommendations! Published in 2021 at "International Journal of Fatigue"
DOI: 10.1016/j.ijfatigue.2021.106238
Abstract: Abstract Two fundamental questions have been addressed on a recently developed high strength β Ti alloy, Ti-5Al-5V-5Mo-3Cr, with respect to two very different types of microstructures, one bimodal and the other fully lamellar, both having… read more here.
Keywords: fatigue; 5al 5mo; low cycle; 5mo 3cr ... See more keywords
Effect of microstructure on tensile properties of Ti–5Al–5Mo–5V–3Cr–1Zr alloy
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2016.09.233
Abstract: Abstract This study aims to reveal how microstructure affect the strength and the plasticity of a metastable β titanium alloy Ti–55531 (Ti–5Al–5Mo–5V–3Cr–1Zr). Lamellar microstructure (LM) and bimodal microstructure (BM) of Ti–55531 alloy were characterized using… read more here.
Keywords: alloy; microscopy; microstructure; deformation ... See more keywords
In situ evaluation of the low-temperature aging response of Ti–5Al–5Mo–5V–3Cr alloy as influenced by starting microstructure
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2020.155331
Abstract: Abstract The impact of starting microstructure on the isothermal behavior of β-metastable Ti–5Al–5Mo–5V–3Cr alloy during aging at 400 °C for 8 h was studied by means of in situ synchrotron X-ray diffraction. Results show that prior deformation… read more here.
Keywords: alloy; 3cr alloy; starting microstructure; 5mo 3cr ... See more keywords
Thermo-mechanical processing window for β phase recrystallization inTi-5Al-5Mo-5V-3Cr alloy
Sign Up to like & getrecommendations! Published in 2018 at "Materials Characterization"
DOI: 10.1016/j.matchar.2018.09.038
Abstract: Abstract Ti-5Al-5Mo-5V-3Cr (Ti-5553) is a high strength β titanium alloy. It is now commonly used in thick section aerospace components. In general, the thermo-mechanical processing (TMP) of β titanium alloys done at high temperature to… read more here.
Keywords: alloy; processing; mechanical processing; thermo mechanical ... See more keywords
Influence of strain rates on high temperature deformation behaviors and mechanisms of Ti-5Al-5Mo-5V-3Cr-1Zr alloy
Sign Up to like & getrecommendations! Published in 2021 at "Materials Characterization"
DOI: 10.1016/j.matchar.2020.110794
Abstract: Abstract In this work, isothermal compression tests of Ti-5Al-5Mo-5 V-3Cr-1Zr alloy under strain rates from 0.01 s−1 to 1 s−1 at 900 °C was carried out. With the increasing strain rate, the flow stress increased and the thickness of… read more here.
Keywords: deformation; 1zr alloy; strain; 5mo 3cr ... See more keywords
The Design of Ti-5Al-5Mo-5V-3Cr Elemental Powders Mixture Processing
Sign Up to like & getrecommendations! Published in 2023 at "Archives of Metallurgy and Materials"
DOI: 10.24425/amm.2020.131728
Abstract: The aim of the study was to indicate the influence of consolidation processes on microstructure and selected mechanical properties of powder metallurgy Ti-5Al-5Mo-5V-3Cr alloy, which was produced by blending of elemental powders method. Morphology of… read more here.
Keywords: 5al 5mo; powders mixture; metallurgy; microscopy ... See more keywords