Microstructural coarsening of 6061 aluminum alloy semi-solid billets prepared via recrystallization and partial melting
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Mechanical Science and Technology"
DOI: 10.1007/s12206-017-0737-5
Abstract: In this study, the Recrystallization and partial melting (RAP) process was performed to prepare 6061 aluminum alloy semi-solid billets. The microstructural evolution and coarsening of the materials were investigated. During the RAP process, the 6061… read more here.
Keywords: 6061 aluminum; semi solid; aluminum alloy;
Effect of Cu element addition on the interfacial behavior and mechanical properties of Sn9Zn-1Al2O3 soldering 6061 aluminum alloys: First-principle calculations and experimental research
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.06.178
Abstract: Abstract In this study, Sn9Zn-1Al2O3-xCu (x = 0, 1.5, 4.5, 6 wt %) composite solder is used to investigate the effect of Cu element and Al2O3 particles addition in soldering 6061 aluminum alloys. First-principle calculations were performed to… read more here.
Keywords: soldering 6061; sn9zn 1al2o3; 6061 aluminum; aluminum alloys ... See more keywords
In-situ TiB2-TiC reinforced Fe-Al composite coating on 6061 aluminum alloy by laser surface modification
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Materials Processing Technology"
DOI: 10.1016/j.jmatprotec.2021.117107
Abstract: Abstract To improve the wear resistance of 6061 aluminum alloy, we have reported the fabrication of in-situ TiB2-TiC reinforced Fe-Al composite coatings by laser alloying with Fe-based self-fluxing alloy, B4C and Ti mixed powder. Two… read more here.
Keywords: tib2 tic; 6061 aluminum; aluminum alloy; tib2 ... See more keywords
Microstructural variation through weld thickness and mechanical properties of peened friction stir welded 6061 aluminum alloy joints
Sign Up to like & getrecommendations! Published in 2017 at "Materials Characterization"
DOI: 10.1016/j.matchar.2017.02.011
Abstract: Abstract The current study examined the effect of microstructure variation on the development of mechanical properties in friction stir welded joints of 6061-T6 aluminum alloy, which were subsequently processed by shot peening (SP). Following to… read more here.
Keywords: variation; aluminum alloy; stir welded; friction stir ... See more keywords
Friction behaviors of 6061 aluminum alloy sheets in hot stamping under dry and lubricated conditions based on hot strip drawing test
Sign Up to like & getrecommendations! Published in 2020 at "Tribology International"
DOI: 10.1016/j.triboint.2020.106504
Abstract: Abstract A high-temperature tribometer based on hot strip drawing was developed and the coefficients of friction between 6061 aluminum alloy sheets and tools at 300°C-500 °C under dry conditions were measured. The microfriction morphology was observed… read more here.
Keywords: strip drawing; friction; 6061 aluminum; hot strip ... See more keywords
A study on surface microgrooves in cavitation test of 6061 aluminum alloy
Sign Up to like & getrecommendations! Published in 2023 at "Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology"
DOI: 10.1177/13506501231153462
Abstract: Microgrooves of different widths and microgrooves structures with varying widths were engraved on the surface of 6061 aluminum alloy using fiber laser marking equipment. In order to investigate the influence of the width of microgrooves… read more here.
Keywords: cavitation; aluminum alloy; surface; 6061 aluminum ... See more keywords
Enhanced Long-Term Reliability of Seal DeltaSpot Welded Dissimilar Joint between 6061 Aluminum Alloy and Galvannealed Steel via Excimer Laser Irradiation
Sign Up to like & getrecommendations! Published in 2021 at "Materials"
DOI: 10.3390/ma14226756
Abstract: Structural-adhesive-assisted DeltaSpot welding was used to improve the weldability and mechanical properties of dissimilar joints between 6061 aluminum alloy and galvannealed HSLA steel. Evaluation of the spot-weld-bonded surfaces from lap shear tests after long-term exposure… read more here.
Keywords: alloy; aluminum alloy; long term; 6061 aluminum ... See more keywords
The Effects of Heat Treatment on Microstructure and Mechanical Properties of Selective Laser Melting 6061 Aluminum Alloy
Sign Up to like & getrecommendations! Published in 2022 at "Micromachines"
DOI: 10.3390/mi13071059
Abstract: Selective laser melting technology can be used for forming curved panels of 6061 aluminum alloy thermal shield devices for the International Thermonuclear Experimental Reactor (ITER), in order to make the formed parts with better performance.… read more here.
Keywords: selective laser; 6061 aluminum; aluminum alloy; treatment ... See more keywords