Effect of Pressure on Microstructure and Cooling Curves of A356 Aluminum Alloy During Solidification
Sign Up to like & getrecommendations! Published in 2019 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-019-01682-4
Abstract: AbstractDuring solidification process of metals and alloys in die casting, the cooling rate of molten material and also freezing time are affected by the heat transfer coefficient of metal/mold interface which is not constant at… read more here.
Keywords: pressure; aluminum alloy; cooling curves; solidification ... See more keywords
Investigation of the Interfacial Heat Transfer Coefficient at the Metal–Mold Interface During Casting of an A356 Aluminum Alloy and AZ81 Magnesium Alloy into Steel and Graphite Molds
Sign Up to like & getrecommendations! Published in 2020 at "International Journal of Metalcasting"
DOI: 10.1007/s40962-020-00495-2
Abstract: Many types of alloys can be cast in graphite molds. The advantage of using graphite molds is that graphite has a higher thermal conductivity than steel and provides a higher alloy cooling rate. In this… read more here.
Keywords: alloy; steel; az81 magnesium; a356 aluminum ... See more keywords
Solidification behavior and rheo-diecasting microstructure of A356 aluminum alloy prepared by self-inoculation method
Sign Up to like & getrecommendations! Published in 2017 at "China Foundry"
DOI: 10.1007/s41230-017-6060-z
Abstract: Semisolid slurry of A356 aluminum alloy was prepared by self-inoculation method, and the microstructure and solidification behavior during rheo-diecasting process were investigated. The results indicate that the semisolid slurry of A356 aluminum alloy can be… read more here.
Keywords: aluminum alloy; solidification; rate; prepared self ... See more keywords
Defect-correlated fatigue assessment of A356-T6 aluminum cast alloy using computed tomography based Kitagawa-Takahashi diagrams
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Fatigue"
DOI: 10.1016/j.ijfatigue.2017.11.003
Abstract: Abstract Modern aluminum cast alloys are promising candidates for highly loaded lightweight components due to their good strength-to-weight ratio. To enable a safe design of aluminum cast components, the microstructure characteristics, e.g. porosity, secondary dendrite… read more here.
Keywords: cast alloy; porosity; computed tomography; aluminum cast ... See more keywords
Bonding interfacial characterization of SiCp/8009Al composite and A356 aluminum alloy using compound casting
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Processing Technology"
DOI: 10.1016/j.jmatprotec.2018.08.007
Abstract: Abstract Compound casting was performed to investigate the bonding of the molten A356 aluminum alloy cast onto the SiCp/8009Al composite that was preheated at 395–450 °C. The bonding strength was measured by carrying out a tensile… read more here.
Keywords: 8009al composite; preheating temperature; aluminum alloy; a356 aluminum ... See more keywords
Study of Microstructure and Hardness in A356 Aluminum Alloy Reinforced with Al2O3 and WC After Hot Extrusion.
Sign Up to like & getrecommendations! Published in 2020 at "Microscopy and Microanalysis"
DOI: 10.1017/s1431927620020826
Abstract: The A356 alloy system has as a principal alloying element the silicon, where the high levels of such element (4.0–13%) generate excellent casting characteristics [1]. In order to expand its application range, a method commonly… read more here.
Keywords: hardness a356; microstructure hardness; study microstructure; aluminum alloy ... See more keywords