Modelling surface quality of abrasive water jet processing at multi-objective optimization criteria
Sign Up to like & getrecommendations! Published in 2020 at "Production Engineering"
DOI: 10.1007/s11740-020-00997-2
Abstract: Al–Mg alloys belong to high mechanical properties aluminum alloys. They are used for different industries such as: automotive, and ship building, etc. Most of these industries depend on large sheet processing. Productivity of the used… read more here.
Keywords: quality; water jet; processing; control ... See more keywords
Integration of quality characteristics models as a software-based graphical interface for machining of AA6351 aluminum alloy using abrasive water jet process
Sign Up to like & getrecommendations! Published in 2020 at "Journal of the Brazilian Society of Mechanical Sciences and Engineering"
DOI: 10.1007/s40430-020-02410-6
Abstract: In this paper, semi-empirical models of the performance characteristics, i.e., material removal rate, average surface roughness, kerf top width and taper angle in abrasive water jet machining (AWJM) of AA6351 aluminum alloy are reported. These… read more here.
Keywords: water jet; aluminum alloy; aa6351 aluminum; abrasive water ... See more keywords
Surface quality and kerf width prediction in abrasive water jet machining of metal-composite stacks
Sign Up to like & getrecommendations! Published in 2019 at "Composites Part B: Engineering"
DOI: 10.1016/j.compositesb.2019.107134
Abstract: Abstract Machinability of stacked Titanium (Ti6Al4V) and CFRP was evaluated using Abrasive Water Jet (AWJ) machining process. The experimental study was conducted using three pressure levels – 200, 275 and 350 MPa. Traverse speed was varied… read more here.
Keywords: jet; kerf width; abrasive water; water jet ... See more keywords
Study on the safety of sparks during rear-mixed abrasive water jet cutting process under the hazardous environment
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Loss Prevention in the Process Industries"
DOI: 10.1016/j.jlp.2019.103965
Abstract: Abstract Abrasive water jet cutting (AWJC) technology has a broad application prospect in flammable and explosive environment. However, the sparks during the rear-mixed AWJC process has been considered as a major hazard. In this paper,… read more here.
Keywords: water jet; rear mixed; abrasive water; safety ... See more keywords
Characterization and optimization of Abrasive Water Jet Machining parameters of aluminium/tungsten carbide composites
Sign Up to like & getrecommendations! Published in 2018 at "Measurement"
DOI: 10.1016/j.measurement.2017.11.059
Abstract: Abstract The present study aims to optimize the Abrasive Water Jet Machining parameters while machining aluminium/tungsten carbide composites. Investigations were carried on 2, 4, 6, 8 and 10 wt% tungsten carbide reinforced composite specimens fabricated by… read more here.
Keywords: water jet; jet; abrasive water; jet machining ... See more keywords
Investigation on performance of abrasive water jet in machining hybrid composites
Sign Up to like & getrecommendations! Published in 2017 at "Materials and Manufacturing Processes"
DOI: 10.1080/10426914.2016.1198039
Abstract: ABSTRACT For machining of composites, abrasive water jet machining is widely employed. For assembly of the machine tool structure, production of slots is essential. In this paper, abrasive water jet machining of composite laminates was… read more here.
Keywords: water jet; water; abrasive water; investigation ... See more keywords
Study the parametric effect of abrasive water jet machining on surface roughness of Inconel 718 using RSM-BBD techniques
Sign Up to like & getrecommendations! Published in 2018 at "Materials and Manufacturing Processes"
DOI: 10.1080/10426914.2017.1401727
Abstract: ABSTRACT This paper presents an experimental investigation to ascertain the parametric impact of abrasive water jet machining on the surface quality of Inconel 718 material. Experiments were designed according to response surface methodology-box Behnken design… read more here.
Keywords: water jet; water; surface; abrasive water ... See more keywords
Abrasive water jet machining of UHMWPE and trade-off optimization
Sign Up to like & getrecommendations! Published in 2020 at "Materials and Manufacturing Processes"
DOI: 10.1080/10426914.2020.1772486
Abstract: ABSTRACT In the defense industry, UHMWPE is primarily used as ballistic material because of its light weight, superior mechanical properties, and particularly, its excellent strength-to-weight ratio compared to metal alloys. In this study, the influence… read more here.
Keywords: water jet; abrasive water; machining uhmwpe; optimization ... See more keywords
Impact of nanoclay filler reinforcement on CFRP composite performance during abrasive water jet machining
Sign Up to like & getrecommendations! Published in 2021 at "Materials and Manufacturing Processes"
DOI: 10.1080/10426914.2021.1906896
Abstract: ABSTRACT This paper aims to examine the influence of nanoclay as secondary reinforcement in carbon epoxy (CFRP) composite on the abrasive water jet machining (AWJM) response for the process parameters, namely, jet pressure (96 and… read more here.
Keywords: cfrp composite; water jet; jet; abrasive water ... See more keywords
Experimental study of delamination and kerf geometry of carbon epoxy composite machined by abrasive water jet
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Composite Materials"
DOI: 10.1177/0021998316688950
Abstract: The present article focuses on mechanism of delamination and kerf geometry in abrasive water jet machining of carbon epoxy composite. In the present study, four process parameters of abrasive water jet machining namely hydraulic pressure,… read more here.
Keywords: delamination; water jet; abrasive water; geometry ... See more keywords
A review of additives in abrasive water jet machining and their performance
Sign Up to like & getrecommendations! Published in 2022 at "Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology"
DOI: 10.1177/13506501221144722
Abstract: Abrasive Water Jet Machining (AWJM) is an advanced machining process that has a variety of applications, including machining of hard-to-machine materials, drilling, milling, coating removal, polishing, etc. They are attractive because of their versatility, absence… read more here.
Keywords: water; additives abrasive; water jet; abrasive water ... See more keywords