Exploration on Kerf-angle and Surface Roughness in Abrasive Waterjet Machining using Response Surface Method
Sign Up to like & getrecommendations! Published in 2018 at "Journal of The Institution of Engineers (India): Series C"
DOI: 10.1007/s40032-017-0366-x
Abstract: Abrasive waterjet machining is a mechanical based unconventional cutting process which uses a mixture of abrasives and pressurized water as an intermediate to cut the material. The present paper focuses in analyzing the effect process… read more here.
Keywords: surface roughness; surface; abrasive waterjet; kerf angle ... See more keywords
Improving surface roughness of abrasive waterjet cutting process by using statistical modeling
Sign Up to like & getrecommendations! Published in 2018 at "Cirp Journal of Manufacturing Science and Technology"
DOI: 10.1016/j.cirpj.2018.03.004
Abstract: Abstract Abrasive waterjet (AWJ) cutting is considered one of the optimum machining processes for cutting a reflective, conductive, or heat sensitive materials like aluminum alloys. The aim of this work is to understand the effect… read more here.
Keywords: surface roughness; waterjet cutting; surface; abrasive waterjet ... See more keywords
Effects of processing parameters on kerf characteristics and surface integrity following abrasive waterjet slotting of Ti6Al4V/CFRP stacks
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2019.04.024
Abstract: Abstract Experimental data is presented in this paper relating to kerf characteristics and surface integrity when using abrasive waterjet slotting of Ti6Al4V/CFRP stacks with various processing conditions. The effect of typical parameters including traverse speed,… read more here.
Keywords: ti6al4v cfrp; cfrp; abrasive waterjet; waterjet slotting ... See more keywords
Predicting correlations in abrasive waterjet cutting parameters of Lanthanum phosphate/Yttria composite by response surface methodology
Sign Up to like & getrecommendations! Published in 2019 at "Measurement"
DOI: 10.1016/j.measurement.2018.09.009
Abstract: Abstract The machining property of Lanthanum phosphate/Yttria prepared by the aqueous sol-gel process is evaluated using abrasive waterjet machine. Jet pressure, Stand-off distance, and traverse speed are taken as the governing parameters on material removal… read more here.
Keywords: methodology; surface; abrasive waterjet; response surface ... See more keywords
Abrasive waterjet cutting of cladded material: kerf taper and MRR analysis
Sign Up to like & getrecommendations! Published in 2018 at "Materials and Manufacturing Processes"
DOI: 10.1080/10426914.2018.1544710
Abstract: ABSTRACT Gas/plasma cutting of cladded materials provides inferior cut quality that demands subsequent finishing processes. Abrasive waterjet cutting could be a proficient alternate in terms of cut quality. However, the inherent problem of kerf taper… read more here.
Keywords: waterjet cutting; analysis; abrasive waterjet; cutting cladded ... See more keywords
Recent Progress Trend on Abrasive Waterjet Cutting of Metallic Materials: A Review
Sign Up to like & getrecommendations! Published in 2021 at "Applied Sciences"
DOI: 10.3390/app11083344
Abstract: Abrasive water jet machining has been extensively used for cutting various materials. In particular, it has been applied for difficult-to-cut materials, mostly metals, which are used in various manufacturing processes in the fabrication industry. Due… read more here.
Keywords: waterjet; waterjet cutting; process; abrasive waterjet ... See more keywords
Impacts of Traverse Speed and Material Thickness on Abrasive Waterjet Contour Cutting of Austenitic Stainless Steel AISI 304L
Sign Up to like & getrecommendations! Published in 2021 at "Applied Sciences"
DOI: 10.3390/app11114925
Abstract: Abrasive water jet machining is a proficient alternative for cutting difficult-to-machine materials with complex geometries, such as austenitic stainless steel 304L (AISI304L). However, due to differences in machining responses for varied material conditions, the abrasive… read more here.
Keywords: traverse speed; material removal; speed material; abrasive waterjet ... See more keywords
Influence of Abrasive Waterjet Parameters on the Cutting and Drilling of CFRP/UNS A97075 and UNS A97075/CFRP Stacks
Sign Up to like & getrecommendations! Published in 2018 at "Materials"
DOI: 10.3390/ma12010107
Abstract: The incorporation of plastic matrix composite materials into structural elements of the aeronautical industry requires contour machining and drilling processes along with metallic materials prior to final assembly operations. These operations are usually performed using… read more here.
Keywords: microscopy; abrasive waterjet; drilling; uns a97075 ... See more keywords
Response Surface Methods Used for Optimization of Abrasive Waterjet Machining of the Stainless Steel X2 CrNiMo 17-12-2
Sign Up to like & getrecommendations! Published in 2021 at "Materials"
DOI: 10.3390/ma14102475
Abstract: Abrasive waterjet machining (AWJM) has a particularly high potential for the machining of stainless steels. One of the main optimization objectives of the machining of X2 CrNiMo 17-12-2 stainless steel is obtaining a minimal surface… read more here.
Keywords: machining stainless; surface; abrasive waterjet; optimization ... See more keywords
Possibilities of Rock Processing with a High-Pressure Abrasive Waterjet with an Aspect Terms to Minimizing Energy Consumption
Sign Up to like & getrecommendations! Published in 2023 at "Materials"
DOI: 10.3390/ma16020647
Abstract: The paper concerns the application a high-pressure abrasive waterjet (AWJ) for cutting the most commonly used rock materials such as granite, limestone, basalt and marble. Based on the analysis of the literature, the influence of… read more here.
Keywords: pressure abrasive; energy; pressure; abrasive waterjet ... See more keywords