Assessing Mechanical Behaviors of Additive Manufactured Alternating Layers of Inconel-718/H13 Tool Steel
Sign Up to like & getrecommendations! Published in 2018 at "JOM"
DOI: 10.1007/s11837-018-2991-0
Abstract: An H13 (high-strength, low-ductility) tool steel die will fail due to compressive high cycle fatigue. If the die is manufactured by direct metal deposition and layered with Inconel-718 (low-strength, high-ductility), it may impact the mechanical… read more here.
Keywords: additive manufactured; strength; inconel 718; tool steel ... See more keywords
Tribological Behavior of Additive Manufactured γ-TiAl by Electron Beam Melting
Sign Up to like & getrecommendations! Published in 2020 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-020-01950-8
Abstract: The present work investigated the dry sliding wear behavior of gamma titanium aluminide (γ-TiAl) alloy deposited by electron beam melting (EBM) additive manufacturing technique. The wear-testing parameters used are applied load and sliding velocity, with… read more here.
Keywords: manufactured tial; beam melting; additive manufactured; electron beam ... See more keywords
Additive-manufactured (3D-printed) electrochemical sensors: A critical review.
Sign Up to like & getrecommendations! Published in 2020 at "Analytica chimica acta"
DOI: 10.1016/j.aca.2020.03.028
Abstract: Additive manufacturing or three-dimensional (3D)-printing is an emerging technology that has been applied in the development of novel materials and devices for a wide range of applications, including Electrochemistry and Analytical Chemistry areas. This review… read more here.
Keywords: electrochemical sensors; electrochemical sensing; printed electrochemical; review ... See more keywords
Design and analysis of additive manufactured bimodal structures obtained by cold spray deposition
Sign Up to like & getrecommendations! Published in 2020 at "Additive manufacturing"
DOI: 10.1016/j.addma.2020.101131
Abstract: Abstract Additive manufacturing potential of cold spray technology was used to fabricate freestanding samples of a copper alloy. Different volume fractions of micro and nanocrystalline powder particles were used to obatin a bimodal structure with… read more here.
Keywords: cold spray; spray; analysis additive; manufactured bimodal ... See more keywords
Acoustic properties of additive manufactured narrow tube periodic structures
Sign Up to like & getrecommendations! Published in 2018 at "Applied Acoustics"
DOI: 10.1016/j.apacoust.2018.02.022
Abstract: Abstract Quarter tube periodic resonators are used to attenuate the acoustic energy of discrete frequencies wherein their sizes can vary from narrow to large. This paper reports acoustical properties of additive manufactured, narrow tube, single… read more here.
Keywords: properties additive; tube periodic; tube; narrow tube ... See more keywords
Development of a bone substitute material based on additive manufactured Ti6Al4V alloys modified with bioceramic calcium carbonate coating: Characterization and antimicrobial properties
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.07.041
Abstract: Abstract This investigation shows that composite structures based on additive manufactured electron beam melted Ti6Al4V scaffolds coated with calcium carbonate particles can be used as a potential biocomposites for bone substitutes. A continuous bioceramic coating… read more here.
Keywords: manufactured ti6al4v; calcium carbonate; surface; bone ... See more keywords
Effects of solid loading on stereolithographic additive manufactured ZrO2 ceramic: A quantitative defect study by X-ray computed tomography
Sign Up to like & getrecommendations! Published in 2021 at "Ceramics International"
DOI: 10.1016/j.ceramint.2021.05.149
Abstract: Abstract In this study, the effects of solid loading on the defects and mechanical performance of stereolithographic additive manufactured ZrO2 ceramic were studied by X-ray computed tomography (X-CT). ZrO2 ceramics were fabricated by stereolithographic additive… read more here.
Keywords: additive manufactured; stereolithographic additive; effects solid; solid loading ... See more keywords
A feasibility study on additive manufactured hybrid metal/composite shock absorbers
Sign Up to like & getrecommendations! Published in 2021 at "Composite Structures"
DOI: 10.1016/j.compstruct.2021.113958
Abstract: Abstract Commonly adopted shock absorbers and, in general, crashworthy structural components, based on sandwich structural concepts and/or complex dumping mechanisms, are, generally, characterized by high volumes and significant additional mass. This research activity is focused… read more here.
Keywords: manufactured hybrid; metal; lattice; additive manufactured ... See more keywords
Influence of heat treatments on the corrosion mechanism of additive manufactured AlSi10Mg
Sign Up to like & getrecommendations! Published in 2019 at "Corrosion Science"
DOI: 10.1016/j.corsci.2018.11.038
Abstract: Abstract This study focuses on the effect of heat treatments on the microstructure and corrosion behaviour of additive manufactured AlSi10Mg specimens. Non heat treated, artificially aged and stress released specimens were studied. The microstructure showed… read more here.
Keywords: manufactured alsi10mg; additive manufactured; influence heat; corrosion ... See more keywords
Characterising and representing small crack growth in an additive manufactured titanium alloy
Sign Up to like & getrecommendations! Published in 2021 at "Engineering Fracture Mechanics"
DOI: 10.1016/j.engfracmech.2021.107876
Abstract: Abstract The purpose of the research is to apply the modified Hartman-Schijve equation for predicting small crack growth rate in an additive manufactured titanium Ti-6Al-4V. Material constants in the equation were determined by long crack… read more here.
Keywords: small crack; additive manufactured; manufactured titanium; crack ... See more keywords
Fatigue performance of additive manufactured TiAl6V4 using electron and laser beam melting
Sign Up to like & getrecommendations! Published in 2017 at "International Journal of Fatigue"
DOI: 10.1016/j.ijfatigue.2016.05.001
Abstract: Abstract Increasingly, additive manufacturing is considered to reduce weight and lead time of aerospace components. Despite the high potential of this manufacturing technology, reliable mechanical properties are an essential prerequisite for future series production. Therefore,… read more here.
Keywords: performance additive; manufactured tial6v4; tial6v4 using; additive manufactured ... See more keywords