Enhanced Failure Load Bearing in Adhesively Bonded Strap Repairs: Numerical Analysis and Experimental Results
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Failure Analysis and Prevention"
DOI: 10.1007/s11668-019-00589-y
Abstract: Adhesively bonded repairs are frequently used to repair aluminum structures due to their attractive options compared to traditional methods such as welding or riveting. A new method of increasing the repair’s strength against uniaxial tensile… read more here.
Keywords: failure load; adhesively bonded; strap; strap repairs ... See more keywords
Effect of strain-rate and moisture content on the mechanical properties of adhesively bonded joints
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Mechanical Science and Technology"
DOI: 10.1007/s12206-020-0404-0
Abstract: Mechanical performance of polymer-based adhesive joints is susceptible to moisture absorption. In this respect, this study establishes a validated methodology for predicting the mechanical responses of adhesively bonded joints under strain rate-dependent and moisture conditions.… read more here.
Keywords: strain rate; bonded joints; moisture; adhesively bonded ... See more keywords
Crack Propagation Behaviour in Thin Aluminium Alloy Sheet Repaired with Adhesively Bonded CFRP Patch
Sign Up to like & getrecommendations! Published in 2019 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-019-01847-1
Abstract: For reducing the crack tip stress intensity factor, adhesively bonded composite patches are employed for crack repair in thin structure. Experimental work was carried out to study environmental assisted cracking behaviour of crack repaired with… read more here.
Keywords: adhesively bonded; patch; aluminium alloy; behaviour ... See more keywords
Mixed mode cohesive zone modelling and analysis of adhesively bonded composite T-joint under pull-out load
Sign Up to like & getrecommendations! Published in 2018 at "Journal of the Brazilian Society of Mechanical Sciences and Engineering"
DOI: 10.1007/s40430-018-1056-1
Abstract: The failure behaviour of three different configurations of adhesively bonded carbon fibre composite T-joints subjected to pull-out load is investigated. Finite element analysis is carried out on the carbon fibre composite T-joint models. A non-linear,… read more here.
Keywords: pull load; composite joint; adhesively bonded; cohesive zone ... See more keywords
Interfacial stress analysis of a CFRR-metal adhesively bonded joint with/without defect under hygrothermal environment
Sign Up to like & getrecommendations! Published in 2019 at "Applied Mathematical Modelling"
DOI: 10.1016/j.apm.2018.10.032
Abstract: Abstract The current study focuses on the single-lap adhesively bonded joint of carbon fiber reinforced resin (CFRR), a kind of carbon fiber reinforced polymers (CFRPs), and metal with/without adhesive defect under coupled hygrothermal environment. Theoretical… read more here.
Keywords: hygrothermal environment; cfrr; metal; bonded joint ... See more keywords
Lamb wave mode scattering analysis on adhesively bonded single lap joint using modal decomposition method
Sign Up to like & getrecommendations! Published in 2021 at "Applied Mathematical Modelling"
DOI: 10.1016/j.apm.2020.08.017
Abstract: Abstract Problems related to scattering phenomena of the antisymmetric fundamental Lamb wave mode with an adhesively bonded lap joint containing a disbond in the adhesive layer is being solved within the framework of this paper.… read more here.
Keywords: adhesively bonded; lap joint; lamb; wave mode ... See more keywords
Mode-I behavior of adhesively bonded composite joints at high loading rates
Sign Up to like & getrecommendations! Published in 2020 at "Composites Science and Technology"
DOI: 10.1016/j.compscitech.2020.108310
Abstract: Abstract This study investigates the high loading rate behavior of adhesively bonded carbon/epoxy composite joints under mode I loading. A computationally guided experimental setup is developed to study the mode-I behavior of composite joints in… read more here.
Keywords: loading rates; adhesively bonded; behavior adhesively; high loading ... See more keywords
Accelerated curing of adhesively bonded G-FRP tube connections — Part I: Experiments
Sign Up to like & getrecommendations! Published in 2021 at "Composite Structures"
DOI: 10.1016/j.compstruct.2021.113999
Abstract: Abstract In the wake of the industry-wide trend towards lightweight construction, fibre-reinforced polymers (FRP) gradually established as an alternative to traditional materials. They are used in particular when low weight, high strength or high corrosion… read more here.
Keywords: curing adhesively; frp; accelerated curing; frp tube ... See more keywords
Fracture behavior of adhesively bonded carbon fabric composite plates with nano materials filled polymer matrix under DCB, ENF and SLS tests
Sign Up to like & getrecommendations! Published in 2018 at "Engineering Fracture Mechanics"
DOI: 10.1016/j.engfracmech.2018.09.030
Abstract: Abstract In our earlier paper [Srivastava et al. Eng. Fract Mech, 180 (2017)] we found that mode I, mode II fracture toughness of carbon nanotubes (CNTs) filled woven carbon fabric composites increases with the addition… read more here.
Keywords: mode; carbon; adhesively bonded; epoxy resin ... See more keywords
Three-parameter viscoelastic foundation model of adhesively bonded single-lap joints with functionally graded adherends
Sign Up to like & getrecommendations! Published in 2018 at "Engineering Structures"
DOI: 10.1016/j.engstruct.2018.05.076
Abstract: Abstract Functionally graded (FG) adherends are beneficial to adhesively bonded joints, as different material composition through the adherend thickness can manipulate the interfacial stress distribution. It is a fact that both shear and peeling stresses… read more here.
Keywords: adhesively bonded; functionally graded; lap joints; model ... See more keywords
Numerical study on mechanical and adhesive splices for ribbed GFRP plates used in concrete beams
Sign Up to like & getrecommendations! Published in 2018 at "Engineering Structures"
DOI: 10.1016/j.engstruct.2018.07.085
Abstract: Abstract A new concrete beam design, comprising concrete core and glass fiber reinforced polymer (GFRP) ribbed side plates has been developed. Plate splicing is made by using a mechanically fastened or adhesively bonded spliced form… read more here.
Keywords: adhesively bonded; numerical study; fastener spacing; gfrp plates ... See more keywords