Photo from archive.org
Sign Up to like & get
recommendations!
0
Published in 2017 at "Plasma Chemistry and Plasma Processing"
DOI: 10.1007/s11090-017-9794-x
Abstract: A tomographic optical system and method based on evaluations of plasma radiation in a wavelength range of 559–601 nm were used to acquire temperature distributions in an air plasma cutting torch in planes perpendicular to the…
read more here.
Keywords:
cutting torch;
plasma cutting;
air plasma;
temperature fluctuations ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2020 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-020-04985-6
Abstract: The titanium alloy TA6V is one of the most important materials used in spacecraft particularly for the fuel tank. In order to mitigate debris in the Low-Earth Orbit and to avoid dramatic collisions on Earth…
read more here.
Keywords:
plasma conditions;
thermal diffusivity;
behavior ta6v;
air plasma ... See more keywords
Photo from archive.org
Sign Up to like & get
recommendations!
1
Published in 2019 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-019-00965-y
Abstract: Fluoropolymers with low surface energies are widely used in friction reduction, anti-corrosion, and anti-ice coatings. The fabrication of hierarchical micro- and nanostructures with fluoropolymers is beneficial for industrial application. In this study, a superhydrophobic composite…
read more here.
Keywords:
fluffy polyfluoroalkoxy;
layer;
plasma spraying;
air plasma ... See more keywords
Photo from archive.org
Sign Up to like & get
recommendations!
0
Published in 2018 at "Arabian Journal for Science and Engineering"
DOI: 10.1007/s13369-018-3585-4
Abstract: The problems of creating aircraft are connected to the development of new heat-resistant thermal materials. The paper analyses the possible increase in durability of heat-resistant coatings to erosion in hypersonic streams of air plasma. To…
read more here.
Keywords:
erosion resistant;
resistant enhancement;
air plasma;
erosion ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2020 at "Archives of biochemistry and biophysics"
DOI: 10.1016/j.abb.2020.108726
Abstract: The study investigates the effect of LPDBD (Low Power Dielectric Barrier Discharge) (Ar + Air) plasma on seed germination, seedling growth and antioxidant enzyme activity of rice. Rice seeds were treated with LPDBD (Ar + Air) plasma for 2 min,…
read more here.
Keywords:
seed;
min min;
air plasma;
rice ... See more keywords
Photo from archive.org
Sign Up to like & get
recommendations!
1
Published in 2017 at "Ceramics International"
DOI: 10.1016/j.ceramint.2017.08.117
Abstract: Abstract A simple way to use a commercial Al 2 O 3 -based refractory in a sintering furnace was developed for the head-end system in pyroprocessing. The key was to suppress the intrinsic chemical reactivity…
read more here.
Keywords:
refractories air;
air plasma;
plasma sprayed;
sprayed coatings ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2019 at "Ceramics International"
DOI: 10.1016/j.ceramint.2018.10.222
Abstract: Abstract The yttrium heavily doped La2Zr2O7 solid solutions coatings, with a Y to La molar ratio of 1:1, have been successfully prepared by air plasma spraying technique. The evolution of phase composition, phase structure and…
read more here.
Keywords:
air plasma;
thermal conductivity;
conductivity;
heavily doped ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.05.320
Abstract: Abstract Thick thermal barrier coatings (TTBCs) with vertical cracks deposited by air plasma spray (APS) and solution precursor plasma spray (SPPS) techniques have been widely investigated to achieve good thermal insulation along with reasonable service…
read more here.
Keywords:
air plasma;
vertical cracks;
unpyrolyzed powder;
plasma sprayed ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2020 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2019.117315
Abstract: Abstract Air plasma was successfully applied to improve the interfacial adhesion between glass fiber (GF) and adhesive for preparing the GF reinforced laminated veneer lumber (LVL) composites with excellent mechanical performance. Benefiting from the synergetic…
read more here.
Keywords:
reinforced laminated;
veneer lumber;
air plasma;
air ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2020 at "Corrosion Science"
DOI: 10.1016/j.corsci.2020.108478
Abstract: Abstract The pore filling behavior in yttria-stabilized zirconia air plasma sprayed (APS) thermal barrier coatings (TBCs) during calcium-magnesium-alumino-silicate (CMAS) infiltration process was investigated. After fully infiltration, the total porosity of the coating decreased. However, the…
read more here.
Keywords:
pore filling;
air plasma;
filling behavior;
thermal barrier ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2020 at "Clinical Plasma Medicine"
DOI: 10.1016/j.cpme.2020.100112
Abstract: Abstract Background Nitric oxide (NO) is a gaseous molecule produced by NO-synthases that regulates a wide range of physiological and pathophysiological processes. Endogenous NO signaling system plays an important role in all stages of wound…
read more here.
Keywords:
medicine;
plason device;
air plasma;
air ... See more keywords