Heat removal efficiency of stratum ventilation for air-side modulation
Sign Up to like & getrecommendations! Published in 2019 at "Applied Energy"
DOI: 10.1016/j.apenergy.2019.01.148
Abstract: Abstract Stratum ventilation has significant thermal non-uniformity between the occupied and upper zones. Although the non-uniformity benefits indoor air quality and energy efficiency, it increases complexities and difficulties in the air-side modulation. In this study,… read more here.
Keywords: ventilation; air side; side modulation; air ... See more keywords
Air-side thermal hydraulic performance of microchannel heat exchangers with different fin configurations
Sign Up to like & getrecommendations! Published in 2017 at "Applied Thermal Engineering"
DOI: 10.1016/j.applthermaleng.2017.07.082
Abstract: Abstract This paper presents three-dimensional steady state analysis of compact multi-louvered fin and flat tube heat exchangers applicable in domestic and mobile air conditioning systems. Conjugate heat transfer analysis has been conducted for five geometric… read more here.
Keywords: thermal hydraulic; air side; heat exchangers; air ... See more keywords
Influence of wet-particle deposition on air-side heat transfer and pressure drop of fin-and-tube heat exchangers
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Heat and Mass Transfer"
DOI: 10.1016/j.ijheatmasstransfer.2018.04.049
Abstract: Abstract Wet particles have higher propensity to deposit on fin surfaces than dry particles, and may cause a more serious deterioration of the air-side performance of fin-and-tube heat exchanger. The purpose of this paper is… read more here.
Keywords: fin; air side; air; particle ... See more keywords
Thermal enhancement of fin and tube heat exchanger with guiding channels and topology optimisation
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Heat and Mass Transfer"
DOI: 10.1016/j.ijheatmasstransfer.2018.08.093
Abstract: Abstract As the air-side heat transfer is controlling the efficiency of fin and tube heat exchangers (FTHX), the thermal enhancement of FTHX relies more on the air-side. A theoretical model of the baseline FTHX is… read more here.
Keywords: fin; air side; topology; heat ... See more keywords
Additively-manufactured metallic porous lattice heat exchangers for air-side heat transfer enhancement
Sign Up to like & getrecommendations! Published in 2020 at "International Journal of Heat and Mass Transfer"
DOI: 10.1016/j.ijheatmasstransfer.2019.119262
Abstract: Abstract In this study, two novel porous lattice air-cooled heat exchangers (Lattice 1 and Lattice 2) were fabricated by the selective laser melting (SLM) technique from an aluminum alloy (AlSi10Mg) powder. Repetitions of the Rhombi-Octet… read more here.
Keywords: porous lattice; lattice heat; air side; heat exchangers ... See more keywords
Bottom-up evidence-based calibration of the HVAC air-side loop of a building energy model
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Building Performance Simulation"
DOI: 10.1080/19401493.2016.1152302
Abstract: This paper proposes an evidence-based bottom-up method to calibrate the heating, ventilation, and air conditioning air-side loop of a building energy model. The building model is calibrated using Building Automation System trend data for each… read more here.
Keywords: air side; air; model; calibration ... See more keywords
Numerical Study of Fin-and-Tube Heat Exchanger in Low-Pressure Environment: Air-Side Heat Transfer and Frictional Performance, Entropy Generation Analysis, and Model Development
Sign Up to like & getrecommendations! Published in 2022 at "Entropy"
DOI: 10.3390/e24070887
Abstract: Heat transfer and frictional performance at the air-side is predominant for the application and optimization of finned tube heat exchangers. For aerospace engineering, the heat exchanger operates under negative pressure, whereas the general prediction models… read more here.
Keywords: heat transfer; air side; entropy generation; pressure ... See more keywords
Characterization of Metallic Interconnects Extracted from Solid Oxide Fuel Cell Stacks Operated up to 20,000 h in Real Life Conditions: The Air Side
Sign Up to like & getrecommendations! Published in 2020 at "Energies"
DOI: 10.3390/en13246487
Abstract: Metallic interconnects represent the main component of a solid oxide fuel cell (SOFC) stack in terms of weight and volume. They are typically made of ferritic stainless steel (FSS) coated on the air side. At… read more here.
Keywords: metallic interconnects; air side; solid oxide; oxide fuel ... See more keywords