Experimental Investigation and Artificial Neural Network Modeling of Warm Galvanization and Hardened Chromium Coatings Thickness Effects on Fatigue Life of AISI 1045 Carbon Steel
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Failure Analysis and Prevention"
DOI: 10.1007/s11668-017-0362-8
Abstract: In the present study, the main purpose is investigation of the coatings thickness effect on the fatigue life of AISI 1045 steel. Herein, two different coatings of warm galvanization and hardened chromium have been used… read more here.
Keywords: network; fatigue life; life aisi; aisi 1045 ... See more keywords
Effect of laser-discrete-quenching on bonding properties of electroplated grinding wheel with AISI 1045 steel substrate and nickel bond
Sign Up to like & getrecommendations! Published in 2020 at "Chinese Journal of Aeronautics"
DOI: 10.1016/j.cja.2020.09.010
Abstract: Abstract To improve the bonding strength between the nickel bond and the hub of the electroplated diamond grinding wheel, a hybrid technique was proposed to combine laser pre-quenching steel substrate and post-electroplating nickel. To validate… read more here.
Keywords: steel substrate; aisi 1045; laser; substrate ... See more keywords
Investigation of nanostructured surface layer of severe shot peened AISI 1045 steel via response surface methodology
Sign Up to like & getrecommendations! Published in 2019 at "Measurement"
DOI: 10.1016/j.measurement.2019.106960
Abstract: Abstract Shot peening (SP) and also severe shot peening (SSP) provide high level compressive residual stress on a certain thickness just beneath the surface. By exposing severe plastic deformation (SPD) via SSP, the nanocrystallization is… read more here.
Keywords: response; methodology; aisi 1045; surface ... See more keywords
Tool wear characterizations in finish turning of AISI 1045 carbon steel for MQCL conditions
Sign Up to like & getrecommendations! Published in 2017 at "Wear"
DOI: 10.1016/j.wear.2016.12.006
Abstract: Abstract This study presents analysis of tool wear of P25 cemented carbide inserts in finish turning of AISI 1045 carbon steel for different cooling conditions: dry cutting, minimum quantity cooling-lubrication (MQCL) and MQCL with phosphate… read more here.
Keywords: mqcl; turning aisi; finish turning; tool wear ... See more keywords
Effect of Multiple Thermal Cycles on the Microstructure and Mechanical Properties of AISI 1045 Weldments
Sign Up to like & getrecommendations! Published in 2022 at "ACS Omega"
DOI: 10.1021/acsomega.2c05249
Abstract: AISI 1045 medium carbon steel sheets having 10 mm thickness were subjected to the shielded metal arc welding process with three, five, and seven passes. The variations in the microstructure due to multiple thermal cycles… read more here.
Keywords: aisi 1045; cycles microstructure; effect multiple; thermal cycles ... See more keywords
Built-up edge reduction in drilling of AISI 1045 steel
Sign Up to like & getrecommendations! Published in 2017 at "Materials and Manufacturing Processes"
DOI: 10.1080/10426914.2016.1221104
Abstract: ABSTRACT In this study, a combined drilling method consists of ultrasonic-assisted drilling (UAD) under the presence of minimum quantity lubrication (MQL), is evaluated. Effect of this method on machinability factors is investigated by implementation of… read more here.
Keywords: edge reduction; built edge; reduction drilling; 1045 steel ... See more keywords
Taguchi Robust Design for Optimizing Surface Roughness of Turned AISI 1045 Steel Considering the Tool Nose Radius and Coolant as Noise Factors
Sign Up to like & getrecommendations! Published in 2018 at "Advances in Materials Science and Engineering"
DOI: 10.1155/2018/2560253
Abstract: AISI 1045 has been widely used in many industrial applications requiring good wear resistance and strength. Surface roughness of produced components is a vital quality measure. A suitable combination of machining process parameters must be… read more here.
Keywords: nose radius; tool nose; surface roughness; tool ... See more keywords
Quench Cooling Performance–Hardness Correlation for AISI 1045 and 1090 Steels
Sign Up to like & getrecommendations! Published in 2019 at "Materials Performance and Characterization"
DOI: 10.1520/mpc20180138
Abstract: Heat transfer and microstructure evolution during quenching of AISI 1045 and 1090 steels in vegetable oils was investigated. To simulate the industrial quench heat treatment, reference probes made of medium and high carbon steels were… read more here.
Keywords: heat; aisi 1045; 1090 steels; performance ... See more keywords
Study of the effects produced by ultrasonic vibration on AISI 1045 steel surface: surface residual stress and surface 3D morphology
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Materials Research"
DOI: 10.3139/146.111634
Abstract: Abstract Experiments for ultrasonic-assisted pulsed-laser surface irradiation and pulsed-laser surface irradiation were conducted based on an Nd:YAG pulsed-laser machine in order to study the effects produced by ultrasonic vibration on the AISI 1045 steel surface.… read more here.
Keywords: aisi 1045; surface; pulsed laser; 1045 steel ... See more keywords
Corrosion Behavior of AISI 1045 Steel in Seawater in the Presence of Flavobacterium sp.
Sign Up to like & getrecommendations! Published in 2020 at "Frontiers in Microbiology"
DOI: 10.3389/fmicb.2020.00303
Abstract: A systematic comparison study was carried out to investigate the effect of Flavobacterium sp. on AISI 1045 steel corrosion by weight loss, fluorescence microscopy (FM), surface analysis, cell count, pH measure, electrochemical impedance spectroscopy (EIS),… read more here.
Keywords: aisi 1045; corrosion; day exposure; flavobacterium ... See more keywords
Dry and MQL Milling of AISI 1045 Steel with Vegetable and Mineral-Based Fluids
Sign Up to like & getrecommendations! Published in 2023 at "Lubricants"
DOI: 10.3390/lubricants11040175
Abstract: The use of mineral-based cutting fluids in machining has the drawback of affecting the environment and industries are under pressures to reduce its use in favor of cleaner productions. In this regard, the vegetal-based cutting… read more here.
Keywords: 1045 steel; aisi 1045; mineral based; cutting fluids ... See more keywords