Characterization of Hydrophobic Silane Film Deposited on AISI 304 Stainless Steel for Corrosion Protection
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-019-04349-9
Abstract: This present study was conducted to determine the aptitude of hydrophobic silane coating in corrosion resistance of AISI 304 stainless steel substrate at the nanoscale. Three newly developed hydrophobic silane-based compounds of compositions, namely [tris(trimethylsiloxy)silyethyl]dimethylchlorosilane… read more here.
Keywords: silane; aisi 304; hydrophobic silane; stainless steel ... See more keywords
Optimizing the Multiattribute Characteristics of CrWN Hard Film Tool in Turning AISI 304 Stainless Steel
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-020-04732-x
Abstract: Coatings are used to increase the surface quality of cutting tools, metal forming stamping, punching tool, plastic injection molding, sliding engine components for automobiles or decorative applications. Many parameters affect the manufacturing performance. Chromium nitride… read more here.
Keywords: hard film; multiattribute characteristics; aisi 304; turning aisi ... See more keywords
Comparison of the Stress Corrosion Cracking Behaviour of AISI 304 Pipes Welded by TIG and LBW
Sign Up to like & getrecommendations! Published in 2020 at "Acta Metallurgica Sinica (English Letters)"
DOI: 10.1007/s40195-020-01126-9
Abstract: The stress corrosion cracking (SCC) behaviour of AISI 304 pipe girth welds which were welded by a single-pass laser beam welding (LBW) and a multi-pass tungsten inert gas welding (TIG), respectively, was studied by the… read more here.
Keywords: corrosion cracking; lbw; behaviour aisi; aisi 304 ... See more keywords
Evaluation of hybrid textured tool performance under minimum quantity lubrication while turning of AISI 304 steel
Sign Up to like & getrecommendations! Published in 2019 at "Journal of The Brazilian Society of Mechanical Sciences and Engineering"
DOI: 10.1007/s40430-019-2069-0
Abstract: Nowadays, the surface texture of tool is an attractive machining technique due to the benefits in any chip removal machining process performance. However, surface texture design on texture tool plays a significant role in improving… read more here.
Keywords: aisi 304; surface texture; tool; texture tool ... See more keywords
Optimization of resistance spot brazing process parameters in AHSS and AISI 304 stainless steel joint using filler metal
Sign Up to like & getrecommendations! Published in 2019 at "Defence Technology"
DOI: 10.1016/j.dt.2019.03.005
Abstract: Abstract The aim of this research study was to determine optimal resistance spot brazing parameters for joining between AHSS and AISI 304 stainless steel by using filler metal. The key parameters investigated in this study… read more here.
Keywords: aisi 304; stainless steel; resistance spot; ahss aisi ... See more keywords
Influence of surface modifications by laser shock processing on the acid chloride stress corrosion cracking susceptibility of AISI 304 stainless steel
Sign Up to like & getrecommendations! Published in 2018 at "Engineering Failure Analysis"
DOI: 10.1016/j.engfailanal.2018.04.045
Abstract: Abstract The effects of laser shock processing (LSP) on stress corrosion cracking (SCC) behavior of AISI 304 stainless steel have been investigated using slow strain rate tests (SSRT) in acid chloride solution. Modifications of surface… read more here.
Keywords: corrosion cracking; aisi 304; stress corrosion; stainless steel ... See more keywords
Microstructure and mechanical performance of TiC-Inconel825 composite coating deposited on AISI 304 steel by TIG cladding process
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Processing Technology"
DOI: 10.1016/j.jmatprotec.2017.06.042
Abstract: Abstract TiC reinforced Inconel825 based hard and wear resistance composite coating was fabricated on AISI 304 steel by TIG cladding process utilizing in-house prepared Inconel825 powder from the discarded chip of turning operation and commercial… read more here.
Keywords: aisi 304; composite coating; tig cladding; cladding process ... See more keywords
Influence of the cold working induced martensite on the electrochemical behavior of AISI 304 stainless steel surfaces
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Research and Technology"
DOI: 10.1016/j.jmrt.2018.10.004
Abstract: Abstract It is clear that the corrosion resistance of carbon steels decreases as cold working amount increases, but for austenitic stainless steels, the relation between cold-working and corrosion performance is not clear. The electrochemical behavior… read more here.
Keywords: 304 stainless; stainless steel; cold working; aisi 304 ... See more keywords
The effects of ball milling time and surface enriched chromium on microstructures and corrosion resistance of AISI 304 stainless steel
Sign Up to like & getrecommendations! Published in 2017 at "Materials Chemistry and Physics"
DOI: 10.1016/j.matchemphys.2017.05.026
Abstract: Abstract This study showed that the increasing of ball milling time caused a beneficial surface chromium enrichment of AISI 304 stainless steel. In addition, grain size decreased with the increasing of ball milling time. The… read more here.
Keywords: stainless steel; 304 stainless; aisi 304; chromium ... See more keywords
Interface analysis of additively manufactured pure molybdenum and AISI 304 stainless steel building-plate
Sign Up to like & getrecommendations! Published in 2021 at "Materials Letters"
DOI: 10.1016/j.matlet.2021.130763
Abstract: Abstract In this study pure molybdenum was produced by laser powder bed fusion on an AISI 304 building-plate. Adhesion issues were found at the interface between the two materials since the very beginning of the… read more here.
Keywords: pure molybdenum; building plate; interface analysis; aisi 304 ... See more keywords
The Effect of Hydraulic Bulge Process on the Surface Topography of Annealed AISI 304 Stainless Steel
Sign Up to like & getrecommendations! Published in 2017 at "Procedia Manufacturing"
DOI: 10.1016/j.promfg.2017.07.052
Abstract: Abstract In this study, the relationship between surface topography and strain was established for annealed 0.2 mm thick AISI 304 stainless steel sheet that had been hydroformed. The effect of the die diameter on the surface… read more here.
Keywords: topography; surface; aisi 304; bulge ... See more keywords