Influence of Ultrasound Vibrations on the Corrosion Resistance of Heat-Exchange Plates Made of AISI 316 Steel
Sign Up to like & getrecommendations! Published in 2019 at "Materials Science"
DOI: 10.1007/s11003-019-00280-5
Abstract: The corrosion resistance of plates 0.4 mm in thickness made of AISI 316 stainless steel is studied under the conditions of ultrasonic vibration with a frequency of 28 kHz and a power of 50 W… read more here.
Keywords: made aisi; aisi 316; steel; corrosion ... See more keywords
Optimization of Welding Parameters, Influence of Activating Flux and Investigation on the Mechanical and Metallurgical Properties of Activated TIG Weldments of AISI 316 L Stainless Steel
Sign Up to like & getrecommendations! Published in 2017 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-017-1046-5
Abstract: This research investigation articulates the joining of AISI 316 L austenitic stainless steel plates of thickness 5 mm by activated tungsten inert gas (A-TIG) welding. Prior to the welding, the optimization of process parameters and the… read more here.
Keywords: aisi 316; activating flux; investigation; stainless steel ... See more keywords
Effects of Spray Cooling Process Parameters on Machining Performance AISI 316 Steel: a Novel Experimental Technique
Sign Up to like & getrecommendations! Published in 2019 at "Experimental Techniques"
DOI: 10.1007/s40799-019-00334-y
Abstract: Machining performance of AISI 316 stainless steel turning under dry and spray impingement cooling environments was investigated. The input parameters such as depth of cut, feed rate, cutting speed, water pressure and air pressure were… read more here.
Keywords: performance aisi; aisi 316; machining performance; performance ... See more keywords
Plasma additive layer manufacture smoothing (PALMS) technology – An industrial prototype machine development and a comparative study on both additive manufactured and conventional machined AISI 316 stainless steel
Sign Up to like & getrecommendations! Published in 2020 at "Additive manufacturing"
DOI: 10.1016/j.addma.2020.101204
Abstract: Abstract Additive Layer Manufacturing (ALM) of metals is rapidly changing the landscape of industrial manufacturing. Its deployment is however still hindered by extremely rough native surfaces, and drastic difficulties in efficiently applying conventional finishing methods.… read more here.
Keywords: stainless steel; additive layer; 316 stainless; aisi 316 ... See more keywords
Effect of sliding wear and electrochemical potential on tribocorrosion behaviour of AISI 316 stainless steel in seawater
Sign Up to like & getrecommendations! Published in 2020 at "Engineering Science and Technology, an International Journal"
DOI: 10.1016/j.jestch.2020.07.004
Abstract: Abstract Sliding tribocorrosion behaviours of AISI 316 stainless steel were investigated against alumina ball in natural seawater environment (SWE) under 5 N loads. OCP (open circuit potential), potentiostatic (−1 V and 0.3 V) and potentiodynamic measurements were… read more here.
Keywords: aisi 316; stainless steel; sliding wear; tribocorrosion ... See more keywords
The comparative evaluation of AISI 316/A387-Gr.91 steels dissimilar weld metal produced by CCGTAW and PCGTAW processes
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2018.10.032
Abstract: Abstract The mechanical properties (impact toughness and hardness profile) and the microstructure of dissimilar weld metal of AISI 316 and A387-Gr.91 steels produced by constant and pulsed currents GTAW were studied. The microstructural studies showed… read more here.
Keywords: a387 steels; aisi 316; dissimilar weld; weld metal ... See more keywords
Preparation of titanizing coating on AISI 316 stainless steel by pack cementation to mitigate surface damage: Estimations of corrosion resistance and tribological behavior
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Physics and Chemistry of Solids"
DOI: 10.1016/j.jpcs.2019.01.029
Abstract: Abstract In this study, a titanizing coating was prepared on AISI 316 stainless steel (316 SS) using the pack cementation technique at 1173 K for 6 h. The microstructural characteristics and surface hardness of the titanizing coating… read more here.
Keywords: surface; titanizing coating; resistance; corrosion ... See more keywords
Evaluation of gamma ray attenuation properties of boron carbide (B4C) doped AISI 316 stainless steel: Experimental, XCOM and Phy-X/PSD database software
Sign Up to like & getrecommendations! Published in 2021 at "Materials Today Communications"
DOI: 10.1016/j.mtcomm.2021.102793
Abstract: Abstract This study aimed to investigate the gamma-ray attenuation properties of AISI 316 stainless steel both experimentally and theoretically by doping different ratios of boron carbide. In the experimental measurements, a gamma spectroscopy system with… read more here.
Keywords: boron carbide; aisi 316; phy psd; stainless steel ... See more keywords
Experimental and theoretical investigations of benzoic acid derivatives as corrosion inhibitors for AISI 316 stainless steel in hydrochloric acid medium: DFT and Monte Carlo simulations on the Fe (110) surface
Sign Up to like & getrecommendations! Published in 2020 at "RSC Advances"
DOI: 10.1039/d0ra06742c
Abstract: The corrosion inhibition efficiencies of benzoic acid (C1), para-hydroxybenzoic acid (C2), and 3,4-dihydroxybenzoic acid (C3) have been evaluated in 0.5 M HCl toward protecting AISI 316 stainless steel (SS). read more here.
Keywords: aisi 316; stainless steel; corrosion; benzoic acid ... See more keywords
An experimental investigation to evaluate the performance of bio-inspired structured tools during machining of AISI 316 L steel
Sign Up to like & getrecommendations! Published in 2024 at "Advances in Materials and Processing Technologies"
DOI: 10.1080/2374068x.2024.2344888
Abstract: ABSTRACT Austenitic stainless steel of grade AISI 316 L finds its widespread application in aerospace and automobile industries. However, machining of AISI 316 L poses a significant problem due to its low thermal conductivity leading to higher… read more here.
Keywords: aisi 316; tool; bio inspired; surface ... See more keywords
Microstructure, mechanical, and corrosion evaluation of nickel-based clad layers on AISI 316 stainless steel: a comparative studyof conventional and advanced arc weld cladding techniques
Sign Up to like & getrecommendations! Published in 2025 at "Materials Research Express"
DOI: 10.1088/2053-1591/ae11ea
Abstract: The present work compares cladding of nickel-based filler (ErNiCrMo-4) on AISI 316 stainless steel via tungsten inert gas, metal inert gas, and cold metal transfer processes, focusing solely on their differences in microstructural, mechanical and… read more here.
Keywords: aisi 316; nickel based; metal; corrosion ... See more keywords