Microstructure and Work Hardening Behavior of Micro-plasma Arc Welded AISI 316L Sheet Joint
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-019-04064-5
Abstract: The aim of this research is to investigate the microstructural changes and work hardening behavior of AISI 316L 0.5-mm-thick sheet due to micro-plasma arc welding. AISI 316L similar sheets were welded in single-pass square butt… read more here.
Keywords: hardening behavior; plasma arc; work hardening; micro plasma ... See more keywords
Effect of Ball Burnishing on Surface Roughness and Wear of AISI 316L SS
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Bio- and Tribo-Corrosion"
DOI: 10.1007/s40735-020-00437-9
Abstract: This work aims at the improvement of surface quality and wear resistance of AISI 316L stainless steel, used in different industrial sectors including orthopedic applications. Ball-burnishing treatment, considered as a very efficient mechanical finish process,… read more here.
Keywords: surface roughness; ball burnishing; surface; aisi 316l ... See more keywords
Photoelectrochemical monitoring of rouging and de-rouging on AISI 316L
Sign Up to like & getrecommendations! Published in 2017 at "Corrosion Science"
DOI: 10.1016/j.corsci.2016.12.016
Abstract: Abstract Electrochemical conditions for inducing rouging on surface of AISI 316L in quasi neutral aqueous solution are studied. Potentiostatic polarization at 0.6 V vs. SSC at pH ∼ 7 allowed growth of colourless passive films with a… read more here.
Keywords: monitoring rouging; rouging aisi; rouging rouging; photoelectrochemical monitoring ... See more keywords
Short crack propagation analysis and fatigue strength assessment of additively manufactured materials: An application to AISI 316L
Sign Up to like & getrecommendations! Published in 2021 at "International Journal of Fatigue"
DOI: 10.1016/j.ijfatigue.2021.106396
Abstract: Abstract This paper presents the application of short crack propagation models based on the cyclic R-curve for assessing the fatigue strength of additively manufactured (AM) materials containing fabrication defects. Chapetti’s and IBESS models were implemented… read more here.
Keywords: additively manufactured; manufactured materials; short crack; fatigue strength ... See more keywords
Strengthening mechanism and hydrogen-induced crack resistance of AISI 316L stainless steel subjected to laser peening at different power densities
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Hydrogen Energy"
DOI: 10.1016/j.ijhydene.2018.05.037
Abstract: Abstract Microstructural response of AISI 316L stainless steel to laser peening (LP) was examined by means of optical microscopy (OM) and transmission electron microscopy (TEM) in order to analyze the effects of LP on hydrogen-induced… read more here.
Keywords: microscopy; hydrogen; stainless steel; aisi 316l ... See more keywords
Recrystallization kinetics, mechanisms, and topology in alloys processed by laser powder-bed fusion: AISI 316L stainless steel as example
Sign Up to like & getrecommendations! Published in 2021 at "Materialia"
DOI: 10.1016/j.mtla.2021.101236
Abstract: Abstract Alloys manufactured by laser powder-bed fusion have intrinsic and hierarchical microstructural features inherited from the fast solidification (up to 104 K/s) and subsequent thermal cycles. This creates epitaxed grains, dislocation cell structures, and second-phase oxide… read more here.
Keywords: recrystallization; powder bed; bed fusion; topology ... See more keywords
Effect of High Porosity on Bending Fatigue Properties of 3D Printed AISI 316L Steel
Sign Up to like & getrecommendations! Published in 2019 at "Procedia Manufacturing"
DOI: 10.1016/j.promfg.2019.08.006
Abstract: Abstract Selective laser melting (SLM) is an effective way to produce optimized metallic parts in relatively short through-put times for various applications. The microstructure of SLM-manufactured metals is affected by the melting parameters applied, namely… read more here.
Keywords: porosity; surface; effect; bending fatigue ... See more keywords
High-temperature corrosion performance of austenitic stainless steels type AISI 316L and AISI 321H, in molten Solar Salt
Sign Up to like & getrecommendations! Published in 2019 at "Solar Energy"
DOI: 10.1016/j.solener.2018.11.019
Abstract: Abstract The corrosion rates of AISI 316L and AISI 321H austenitic stainless steel, immersed in a stagnant isothermal mixture of 60% NaNO3 and 40% KNO3 molten salt at 550 °C in atmospheric air are 8.6 and… read more here.
Keywords: aisi 321h; austenitic stainless; corrosion; aisi 316l ... See more keywords
Dry sliding wear test on borided AISI 316L stainless steel under ball-on-flat configuration: A statistical analysis
Sign Up to like & getrecommendations! Published in 2021 at "Tribology International"
DOI: 10.1016/j.triboint.2021.106885
Abstract: Abstract In this paper, significant results about the evaluation of the influence of wear test factors such as load, distance, and sliding speed are analyzed to determine the statistical behavior of the specific wear rate,… read more here.
Keywords: dry sliding; 316l stainless; borided aisi; aisi 316l ... See more keywords
Effect of heat input on microstructure and mechanical properties of dissimilar joints of AISI 316L steel and API X70 high-strength low-alloy steel
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Iron and Steel Research International"
DOI: 10.1016/s1006-706x(18)30024-4
Abstract: The microstructure and mechanical properties of dissimilar joints of AISI 316L austenitic stainless steel and API X70 high-strength low-alloy steel were investigated. For this purpose, gas tungsten arc welding (GTAW) was used in three different… read more here.
Keywords: microscopy; api x70; mechanical properties; heat ... See more keywords
Texture analyses of friction stir welded austenitic stainless steel AISI-316L
Sign Up to like & getrecommendations! Published in 2017 at "Advances in Materials and Processing Technologies"
DOI: 10.1080/2374068x.2017.1414558
Abstract: Abstract Low stacking fault energy AISI-316L stainless steel of 4 mm thick plates are friction stir welded at 1100 RPM and 8 mm/min welding speed using cubic boron nitride-tungsten rhenium composite tool. Large area orientation… read more here.
Keywords: layer; friction stir; stainless steel; texture ... See more keywords