Enhanced Ductility of a Bimodal Grain Structure Ti–22Al–25Nb Alloy Fabricated by Spark Plasma Sintering
Sign Up to like & getrecommendations! Published in 2017 at "Advanced Engineering Materials"
DOI: 10.1002/adem.201600804
Abstract: A bimodal grain structure Ti–22Al–25Nb alloy with enhanced ductility is fabricated from the blended powder mixture of argon gas atomized powder and mechanically alloyed powder by spark plasma sintering. The microstructure of the bimodal grain… read more here.
Keywords: alloy; bimodal grain; powder; 25nb alloy ... See more keywords
A Comparison Study of the Thermal Fatigue Properties of Three Ni‐Based Cast Superalloys Cycled from 20 to 1100 °C
Sign Up to like & getrecommendations! Published in 2019 at "Advanced Engineering Materials"
DOI: 10.1002/adem.201900054
Abstract: The thermal fatigue properties of cycling from 20 to 1100 °C, a new kind of Ni‐based cast superalloy, named N3 are studied and the results are compared with those of other alloys, namely, K4002 and K403,… read more here.
Keywords: fatigue properties; thermal fatigue; based cast; alloy ... See more keywords
Effect of Cu on Amorphization of a TiNi Alloy during HPT and Shape Memory Effect after Post‐Deformation Annealing
Sign Up to like & getrecommendations! Published in 2019 at "Advanced Engineering Materials"
DOI: 10.1002/adem.201900387
Abstract: A ternary TiNiCu memory alloy was subjected to high‐pressure torsion (HPT) followed by post‐deformation annealing (PDA) to study the effect of Cu (5 at%) on amorphization after HPT processing and also the microstructural evolution and… read more here.
Keywords: alloy; hpt; pda; amorphization ... See more keywords
Enhanced Performance of Mg–Zn–Y–Mn Alloy via Minor Ca Addition
Sign Up to like & getrecommendations! Published in 2019 at "Advanced Engineering Materials"
DOI: 10.1002/adem.201900908
Abstract: Herein, the effect of calcium (Ca) microalloying on the microstructure and mechanical properties of Mg94Zn2.5Y2.5Mn1 alloy is identified. The long‐period stacking‐ordered (LPSO) phase transformation mechanism during solid‐solution treatment and hot deformation behavior during extrusion process… read more here.
Keywords: phase; lpso phase; phase nanoparticles; alloy ... See more keywords
Enhanced Creep Resistance of an Ultrafine‐Grained Ti–6Al–4V Alloy with Modified Surface by Ion Implantation and (Ti + V)N Coating
Sign Up to like & getrecommendations! Published in 2020 at "Advanced Engineering Materials"
DOI: 10.1002/adem.201901219
Abstract: This research examines the creep behavior of an ultrafine‐grained (UFG) Ti−6Al−4V alloy processed by equal‐channel angular pressing followed by extrusion. It is shown that modifying the surface of the UFG alloy with nitrogen ions and… read more here.
Keywords: 6al alloy; ion; enhanced creep; alloy ... See more keywords
Deformation Behavior and Dynamic Recrystallization of Ti–22Al–25Nb Alloy at 750–990 °C
Sign Up to like & getrecommendations! Published in 2019 at "Advanced Engineering Materials"
DOI: 10.1002/adem.201901231
Abstract: Ti–22Al–25Nb is a representative of Ti2AlNb alloys with excellent comprehensive properties, which has great application prospects in the aerospace field. Herein, high‐temperature tensile plastic deformation behavior and dynamic recrystallization process of Ti–22Al–25Nb alloy are researched… read more here.
Keywords: 22al 25nb; dynamic recrystallization; deformation behavior; alloy ... See more keywords
Effects of Dy Addition on the Mechanical and Degradation Properties of Mg–2Zn–0.5Zr Alloy
Sign Up to like & getrecommendations! Published in 2020 at "Advanced Engineering Materials"
DOI: 10.1002/adem.201901360
Abstract: As candidates for biomaterials, magnesium and its alloys have promising properties such as biodegradability and biocompatibility. However, their poor mechanical properties and rapid degradation rate limit clinical application; therefore, solving these issues is essential for… read more here.
Keywords: mechanical degradation; microscopy; 2zn 5zr; degradation ... See more keywords
In Situ Study of Role of Microstructure on Antiwear Tribofilm Formation on AZ91 Magnesium Alloy under Zinc Dialkyldithiophosphate Containing Lubricant
Sign Up to like & getrecommendations! Published in 2020 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202000335
Abstract: Herein, role of microstructure on friction and wear properties of as‐cast and aged AZ91 alloy is investigated using atomic force microscopy (AFM) in lubricated conditions. The lubricant contains commercial antiwear additive zinc dialkyldithiophosphate (ZDDP), which… read more here.
Keywords: role microstructure; alloy; tribofilm formation; tribofilm ... See more keywords
Interaction of Fe‐Containing, Secondary Al–Si Alloy with Oxide and Carbon‐Containing Ceramics for Fe Removal
Sign Up to like & getrecommendations! Published in 2021 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202100595
Abstract: Fe is a detrimental impurity element in secondary, i.e., recycled, Al–Si cast alloys for castability and mechanical properties. Fe removal can be achieved by binding Fe into Fe‐containing, primary particles and removing these from the,… read more here.
Keywords: alloy oxide; secondary alloy; interaction; alloy ... See more keywords
Fabrication of Nanocrystalline High‐Strength Magnesium−Lithium Alloy by Rotary Swaging
Sign Up to like & getrecommendations! Published in 2021 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202100666
Abstract: A high‐strength magnesium‐lithium alloy is successfully fabricated via cold rotary swaging herein. The microstructure evolution in the central and edge regions of the alloy bar during the swaging process is explored using transmission electron microscopy.… read more here.
Keywords: alloy; central region; alloy bar; strength ... See more keywords
Investigation of Phase Transformations and Ordering Mechanisms in a Pd–Cu–Ag–Ru Alloy
Sign Up to like & getrecommendations! Published in 2024 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202400255
Abstract: An in‐depth analysis of phase transformations in a Pd–Cu–Ag alloy, crucial for applications in hydrogen membranes and electrical components, is presented. The investigation emphasizes the influence of the deformation rate and addition of Ag on… read more here.
Keywords: investigation phase; phase transformations; alloy; transformations ordering ... See more keywords