Tailoring Crystalline States of Alloy Coating for High Current Density and Large Areal Capacity of Zn.
Sign Up to like & getrecommendations! Published in 2025 at "Small"
DOI: 10.1002/smll.202409654
Abstract: Due to issues of hydrogen evolution, corrosion, and uncontrolled deposition behaviors at the Zn anode, the practical implementation of Zn-ion batteries has faced significant obstacles. Very limited attention is directed toward various alloy crystalline states… read more here.
Keywords: alloy coating; density large; capacity; crystalline states ... See more keywords
Fabrication of the τ5c Intermetallic Compound Monoliths by a Novel Powder Metallurgy and Hot-Dipping Approach
Sign Up to like & getrecommendations! Published in 2020 at "Metallurgical and Materials Transactions B"
DOI: 10.1007/s11663-019-01765-z
Abstract: The precipitation of discrete iron-based intermetallic compounds (IMC) is an inevitable phenomenon in a steel strip alloy coating pot due to the continuous supply of iron from the steel strip and temperature perturbations in the… read more here.
Keywords: alloy; dissolution; steel; powder metallurgy ... See more keywords
Development of High Corrosion- and Wear-Resistant Al-Si Alloy Coating on AZ80 Mg Alloy by Hot Extrusion
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-020-05134-9
Abstract: Mg alloys have been known as the lightest metal materials. However, their practical use is strictly limited due to their poor corrosion and wear resistances. To improve those resistances simultaneously, the present authors have fabricated… read more here.
Keywords: hot extrusion; alloy; metallurgy; alloy coating ... See more keywords
Characterization and Properties of CuZrAlTiNiSi High Entropy Alloy Coating Obtained By Mechanical Alloying and Vacuum Hot-Pressing Sintering
Sign Up to like & getrecommendations! Published in 2020 at "JOM"
DOI: 10.1007/s11837-020-04005-x
Abstract: The CuZrAlTiNiSi high entropy alloy coating (HEAC) was synthesized on T10 substrate using mechanical alloying and vacuum hot-pressing sintering technique. The results show that the final product of as-milled powders is amorphous HEA phase with… read more here.
Keywords: cuzraltinisi high; alloying vacuum; entropy alloy; mechanical alloying ... See more keywords
Microstructure and wear resistance of CoCrNbNiW high-entropy alloy coating prepared by laser melting deposition
Sign Up to like & getrecommendations! Published in 2019 at "Rare Metals"
DOI: 10.1007/s12598-019-01342-y
Abstract: The defect-free CoCrNbNiW high-entropy alloy coating was successfully prepared by laser melting deposition, and its microstructure and wear resistance were investigated. The results showed that the microstructure of CoCrNbNiW high-entropy alloy coating consisted of fcc… read more here.
Keywords: entropy alloy; cocrnbniw high; alloy coating; high entropy ... See more keywords
High temperature wear performance of laser-cladded FeNiCoAlCu high-entropy alloy coating
Sign Up to like & getrecommendations! Published in 2018 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2018.03.135
Abstract: Abstract High temperature wear is a common phenomenon, but in the field of high-entropy alloys, there are limited literatures on the wear behavior of laser-cladded high-entropy alloy coatings at elevated temperature. In this work, the… read more here.
Keywords: entropy alloy; laser cladded; high entropy; fenicoalcu high ... See more keywords
A comparative study on the growth behaviors of Sn whiskers and hillocks in a Sn-Al alloy coating under different environments
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2020.157101
Abstract: Abstract In this study, the effects of factors such as temperature, solution and surface roughness on the growth of whiskers in a 100 μm thick Sn-Al alloy coating were comparatively investigated under different environments. The results… read more here.
Keywords: study; stress; whiskers hillocks; different environments ... See more keywords
Investigations on microstructure and wear resistance of Fe-Mo alloy coating fabricated by plasma transferred arc cladding
Sign Up to like & getrecommendations! Published in 2018 at "Surface and Coatings Technology"
DOI: 10.1016/j.surfcoat.2018.07.040
Abstract: Abstract A wear-resistant Fe-Mo alloy coating was fabricated on the AISI 1045 steel substrate by plasma transferred arc (PTA) cladding, using pure Mo powders as the precursor material. The microstructure, microhardness and wear resistance of… read more here.
Keywords: wear resistance; alloy coating; resistance; coating fabricated ... See more keywords
Process optimization of jet electrodeposition Ni–Co–P alloy coating using response surface methodology and the tribological behavior of Ni–Co–P nanocomposite coatings
Sign Up to like & getrecommendations! Published in 2025 at "Scientific Reports"
DOI: 10.1038/s41598-025-90163-4
Abstract: A novel Ni–Co–P alloy coating and Ni–Co–P nanocomposite coating were prepared by jet electrodeposition. The influence of jet electrodeposition processing parameters on the microhardness and wear track width of the Ni–Co–P alloy coating was investigated.… read more here.
Keywords: alloy coating; methodology; jet electrodeposition; jet ... See more keywords
Microstructure and properties of laser-clad FeNiCoCrTi0.5Nb0.5 high-entropy alloy coating
Sign Up to like & getrecommendations! Published in 2020 at "Materials Science and Technology"
DOI: 10.1080/02670836.2020.1743924
Abstract: ABSTRACT FeNiCoCrTi0.5Nb0.5 high-entropy alloy coating is prepared on AISI 1045 steel by laser cladding. The cross-sectional macroscopic morphology, phase, microstructure, microhardness and wear resistance are studied systematically. The results show that FeNiCoCrTi0.5Nb0.5 coating has no… read more here.
Keywords: entropy alloy; fenicocrti0 5nb0; coating; high entropy ... See more keywords
Wear resistance of nickel-based alloy coating formed by multilayer laser cladding
Sign Up to like & getrecommendations! Published in 2018 at "Materials Research Express"
DOI: 10.1088/2053-1591/aae01b
Abstract: Different thickness coatings formed by multilayer laser cladding are widely employed in laser repairing and the wear resistance of them are concerned. Multilayer nickel-based alloy were fabricated on the surface of low alloy steel by… read more here.
Keywords: wear resistance; resistance nickel; based alloy; alloy coating ... See more keywords