Corrosion behaviour of CoCrMo alloy fabricated by electron beam melting
Sign Up to like & getrecommendations! Published in 2018 at "Corrosion Science"
DOI: 10.1016/j.corsci.2018.04.033
Abstract: Abstract Electrochemical and static immersion tests in 1 mass% lactic acid solution are performed to investigate the corrosion behaviour of CoCrMo alloy fabricated by electron beam melting with cylindrical axes of samples deviating from build… read more here.
Keywords: behaviour cocrmo; corrosion behaviour; alloy fabricated; fabricated electron ... See more keywords
Microstructure and properties of Mo-Si-B alloy fabricated via novel technology: Plasma Oscillatory Pressure Sintering
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2021.161274
Abstract: Abstract Molybdenum silicon boron alloy is regarded as a new generation of ultra-high temperature alloys and is expected to replace the existing nickel-based alloys. However, the molybdenum silicon boron alloys prepared by powder metallurgy exhibited… read more here.
Keywords: microstructure properties; alloy fabricated; silicon boron; fabricated via ... See more keywords
Microstructural evolution and corrosion behavior of Ti–6Al–4V alloy fabricated by laser metal deposition for dental applications
Sign Up to like & getrecommendations! Published in 2021 at "Journal of materials research and technology"
DOI: 10.1016/j.jmrt.2021.07.006
Abstract: Abstract In this study, microstructural evolution and corrosion behavior of Ti–6Al–4V (TC4) alloy fabricated by laser metal deposition (LMD) were investigated in simulated saliva at 37 °C as a function of scanning strategies. One-way scanning possessed… read more here.
Keywords: corrosion behavior; alloy fabricated; evolution corrosion; microstructural evolution ... See more keywords
Microstructure stability and tensile properties of Cu-3Ag-1Zr alloy fabricated by rapid solidification and cold rolling
Sign Up to like & getrecommendations! Published in 2020 at "Materials Characterization"
DOI: 10.1016/j.matchar.2019.110091
Abstract: Abstract A Cu-3Ag-1Zr alloy was fabricated by rapid solidification and cold rolling. The microstructure stability and tensile properties of this alloy after isochronal annealing at 350–900 °C were investigated. The results show that the microstructure of… read more here.
Keywords: alloy fabricated; 3ag 1zr; 1zr alloy; stability ... See more keywords
Effects of yttrium oxides on the microstructure and mechanical properties of 15-15Ti ODS alloy fabricated by casting
Sign Up to like & getrecommendations! Published in 2020 at "Materials Characterization"
DOI: 10.1016/j.matchar.2020.110228
Abstract: Abstract The emphasis of oxide dispersion strengthened (ODS) steels is on the size, morphology, and distribution of the oxide particles. In this paper, the behavior of yttrium oxides particles in 15-15Ti alloy fabricated by casting… read more here.
Keywords: fabricated casting; alloy fabricated; 15ti alloy; mechanical properties ... See more keywords
A high-performance Mg-Al-Sn-Zn-Bi alloy fabricated by combining sub-rapid solidification and hot rolling
Sign Up to like & getrecommendations! Published in 2020 at "Materials Characterization"
DOI: 10.1016/j.matchar.2020.110580
Abstract: Abstract The development of wrought Mg alloys with high alloying contents is greatly restricted by the negative influence of coarse aggregative second phases originating from the casting process. In the present work, we reported a… read more here.
Keywords: alloy; alloy fabricated; hot rolling; fabricated combining ... See more keywords
Characterisation of a novel Sc and Zr modified Al–Mg alloy fabricated by selective laser melting
Sign Up to like & getrecommendations! Published in 2017 at "Materials Letters"
DOI: 10.1016/j.matlet.2017.03.089
Abstract: Abstract Correlations between densification, hardness and electrical conductivity were investigated over a wide range of applied volumetric energy densities (E) for an Al–Mg–Sc–Zr alloy fabricated by selective laser melting. It is shown that porosity dominates… read more here.
Keywords: selective laser; fabricated selective; alloy fabricated; laser melting ... See more keywords
Relation between heat treatment processes and microstructural characteristics of 7075 Al alloy fabricated by SLM
Sign Up to like & getrecommendations! Published in 2020 at "Vacuum"
DOI: 10.1016/j.vacuum.2020.109404
Abstract: Abstract 7075 aluminum alloy fabricated by selective laser melting (SLM) was subjected to different heat treatment processes. Microstructures and precipitates of this alloy were observed and analyzed under different treatment processes. The results indicated that… read more here.
Keywords: heat treatment; phase; alloy fabricated; treatment ... See more keywords
Fatigue Strength of an AlSi10Mg Alloy Fabricated by Selective Laser Melting
Sign Up to like & getrecommendations! Published in 2019 at "Russian Metallurgy (Metally)"
DOI: 10.1134/s0036029519040098
Abstract: Abstract —The mechanical properties and the fracture mechanisms of the AlSi10Mg alloy fabricated by selective laser melting at various angles to the base are studied. The alloy is tested under static and cyclic deformation conditions.… read more here.
Keywords: fabricated selective; alloy fabricated; strength; alsi10mg alloy ... See more keywords
Structure and properties of Mo–9Si–8B alloy fabricated by casting
Sign Up to like & getrecommendations! Published in 2017 at "Inorganic Materials: Applied Research"
DOI: 10.1134/s2075113317050112
Abstract: This article discusses the microstructure and mechanical properties under compression and resistance against oxidation of Mo–9Si–8B (at %) alloy fabricated by casting. Despite generation of coarse dendritic structure, the as-cast alloy demonstrates excellent high-temperature strength:… read more here.
Keywords: strength; 9si alloy; alloy; fabricated casting ... See more keywords
Room Temperature Strengthening and High-Temperature Superplasticity of Mg-Li-Al-Sr-Y Alloy Fabricated by Asymmetric Rolling and Friction Stir Processing
Sign Up to like & getrecommendations! Published in 2023 at "Materials"
DOI: 10.3390/ma16062345
Abstract: Magnesium-lithium alloy is the lightest alloy to date. To explore its room temperature strength and high-temperature ductility, a plate of a new fine-grained Mg-9.13Li-3.74Al-0.31Sr-0.11Y alloy was fabricated by asymmetric rolling, and the rolled plate was… read more here.
Keywords: temperature; alloy fabricated; high temperature; room temperature ... See more keywords