Innovatively Joining Thin Al Alloy Sheets Using the Synergistic Effect of Rotating and Stationary Shoulders and Joint Mechanical Properties
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-019-04530-0
Abstract: In this work, thin Al alloy sheets were first joined by the synergistic effect of rotating and stationary shoulders. A tool system combined with an inner rotating shoulder and an outer stationary shoulder was designed.… read more here.
Keywords: effect rotating; alloy sheets; rotating stationary; shoulder ... See more keywords
Substantial improvement in cold formability of concentrated Mg–Al–Zn–Ca alloy sheets by high temperature final rolling
Sign Up to like & getrecommendations! Published in 2021 at "Acta Materialia"
DOI: 10.1016/j.actamat.2021.117328
Abstract: Abstract Poor formability at room temperature (RT) has been the main bottleneck for a wider range of applications of concentrated Mg–Al–Ca(–Zn) sheet alloys. Here, we report that RT stretch formability of concentrated Mg–Al–Zn–Ca alloy sheets… read more here.
Keywords: temperature; alloy sheets; concentrated alloy; final rolling ... See more keywords
An investigation on fatigue behavior of AA2024 aluminum alloy sheets in fuselage lap joints
Sign Up to like & getrecommendations! Published in 2021 at "Engineering Failure Analysis"
DOI: 10.1016/j.engfailanal.2021.105457
Abstract: Abstract The purpose of this paper is to estimate the fatigue life of AA2024 aluminum alloy sheets in riveted joints under the influence of cyclic loading. First, the factors affecting the plastic equivalent strain resulting… read more here.
Keywords: aa2024 aluminum; aluminum alloy; alloy sheets; riveted joints ... See more keywords
A novel deep drawing process for aluminum alloy sheets at cryogenic temperatures
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Processing Technology"
DOI: 10.1016/j.jmatprotec.2020.116743
Abstract: Abstract To overcome the low drawability of aluminum alloy sheets at room temperature (RT), a novel deep drawing process at cryogenic temperatures is proposed. Uniaxial tensile tests were carried out at RT, −130 °C, −150 °C, −160 °C… read more here.
Keywords: aluminum alloy; deep drawing; alloy sheets; cryogenic temperatures ... See more keywords
Production of Fe-6.9 wt%Ti alloy sheets for application in electric machines: Physical properties characterization
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Magnetism and Magnetic Materials"
DOI: 10.1016/j.jmmm.2021.168394
Abstract: Abstract Early structural damage and resulting failures can be caused by vibration in AC electrical machines. Since the stator is under a magnetic field that varies with time, the stator magnetic material contracts and expands… read more here.
Keywords: low magnetostriction; production alloy; alloy sheets; sheets application ... See more keywords
Microstructure characterization of W-Cu alloy sheets produced by high temperature and high pressure deformation technique
Sign Up to like & getrecommendations! Published in 2017 at "Materials Letters"
DOI: 10.1016/j.matlet.2017.06.090
Abstract: Abstract W-Cu alloy sheets were fabricated in this study by multiple high temperature and high pressure (multi-HTHP) deformation technique. Crystalline structures and phase composition of W-Cu alloy sheets were investigated by transmission electron microscopy and… read more here.
Keywords: alloy; alloy sheets; high temperature; temperature high ... See more keywords
Mechanical property and characterization of TA1 titanium alloy sheets welded by vacuum electron beam welding
Sign Up to like & getrecommendations! Published in 2019 at "Vacuum"
DOI: 10.1016/j.vacuum.2018.10.027
Abstract: Abstract Vacuum electron beam welding (EBW) was used to weld the thick TA1 titanium alloy sheets. Test results indicated that the coarse serrated-shape α and needle-shape α′ grains were observed in weld zone (WZ); the… read more here.
Keywords: beam welding; alloy sheets; ta1 titanium; titanium alloy ... See more keywords
Microstructure characteristics and liquation behavior of fiber laser welded joints of Mg-5Zn-1Mn-0.6Sn alloy sheets
Sign Up to like & getrecommendations! Published in 2017 at "Transactions of Nonferrous Metals Society of China"
DOI: 10.1016/s1003-6326(17)60093-1
Abstract: Abstract Fine-grained Mg-5Zn-1Mn-0.6Sn alloy sheets of 2 mm in thickness were welded by fiber laser welding. The appearance and microstructures of the welding joints and liquation behaviors in the partially melted zone (PMZ) were investigated.… read more here.
Keywords: 1mn 6sn; alloy sheets; 6sn alloy; 5zn 1mn ... See more keywords
Study on Bulk Texture and Mechanical Properties of As-Extruded Wide Mg-Al-Zn Alloy Sheets with Different Al Addition
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15124147
Abstract: The wide Mg alloy sheets produced by hot extrusion usually can easily form an inhomogeneous texture, resulting in anisotropic mechanical properties and poor formability. However, few studies have been carried out on the bulk texture… read more here.
Keywords: texture mechanical; texture; alloy sheets; bulk texture ... See more keywords