Sign Up to like & get
recommendations!
1
Published in 2017 at "Oxidation of Metals"
DOI: 10.1007/s11085-017-9777-6
Abstract: The efficiency of a solid oxide fuel cell (SOFC) can be improved by using a Ni-mesh between the ferritic steel interconnect and the Ni/YSZ anode. However, interdiffusion processes can lead to internal oxidation within the…
read more here.
Keywords:
behavior different;
influence alloying;
elements behavior;
alloying elements ... See more keywords
Photo from archive.org
Sign Up to like & get
recommendations!
2
Published in 2017 at "Refractories and Industrial Ceramics"
DOI: 10.1007/s11148-017-0099-7
Abstract: An optimum charge composition is developed for preparing porous permeable cermet SHS-materials with prescribed operating properties for cleaning exhaust gases of industrial installations and internal combustion engines. Physicomechanical properties of the materials obtained are determined…
read more here.
Keywords:
materials based;
porous shs;
based iron;
alloying elements ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2020 at "Journal of Iron and Steel Research International"
DOI: 10.1007/s42243-020-00494-x
Abstract: Using the first-principles methods, the effects of different alloying elements M (M = Fe, Ni, Mn, Si, Mo, Cu, Y) on Cr2O3 with Cl adsorption are studied. The results show that the layer distance of all doped…
read more here.
Keywords:
adsorption;
different alloying;
elements cr2o3;
alloying elements ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2019 at "Computational Materials Science"
DOI: 10.1016/j.commatsci.2019.02.007
Abstract: Abstract Iron based industrial steels typically contain a large number of alloying elements, even so-called low alloyed steels. Under irradiation, these alloying elements form clusters that have a detrimental impact of the mechanical properties of…
read more here.
Keywords:
alloying elements;
formation;
iron based;
stability ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2018 at "Corrosion Science"
DOI: 10.1016/j.corsci.2018.08.021
Abstract: Abstract The effects of alloying elements on corrosion of Ni-based alloys in NaCl-KCl-MgCl2 under Ar in the temperature range of 600∼800 °C were investigated by immersion test, SEM/EDS, EPMA and XRD techniques. A thermodynamic potential-pO2− diagram…
read more here.
Keywords:
nacl kcl;
effects alloying;
corrosion;
elements corrosion ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2017 at "Intermetallics"
DOI: 10.1016/j.intermet.2017.02.007
Abstract: Abstract First-principles calculations were performed to study the adhesion of the M alloyed TiAl and TiO 2 interface (M = Si, Cr, Co, Ni, Y, Zr, Nb, Mo, Pd, and W). The occupation of alloying elements in…
read more here.
Keywords:
tio interface;
interface;
adhesion;
alloying elements ... See more keywords
Photo from archive.org
Sign Up to like & get
recommendations!
2
Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2016.08.259
Abstract: Abstract Gamma titanium aluminides are promising alloys known for their good mechanical properties and low densities, but their low oxidation resistance at high temperatures limits their application. This work discusses the thermocyclic oxidation behavior of…
read more here.
Keywords:
high temperatures;
oxidation;
tial alloys;
thermocyclic oxidation ... See more keywords
Photo from archive.org
Sign Up to like & get
recommendations!
2
Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2017.03.290
Abstract: Abstract From first-principle calculations with the Local Density Approximation (LDA) and Generalized Gradient Approximation (GGA) approaches, the structural, elastic, electronic and thermodynamic properties of the PdTM and Pd 31 TM(TM = Ti, Zr, Hf) alloy have been…
read more here.
Keywords:
thermodynamic properties;
elements mechanical;
effects alloying;
young modulus ... See more keywords
Photo by djuls from unsplash
Sign Up to like & get
recommendations!
0
Published in 2021 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2020.156548
Abstract: Abstract As the potential ultrahigh temperature alloy, the brittle fracture of iridium (Ir) has puzzled people for a long time as a challenge. In this work, thirty-three alloying elements are employed to enhance the ductility…
read more here.
Keywords:
dilute based;
alloys first;
alloying elements;
based alloys ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2020 at "Journal of materials research and technology"
DOI: 10.1016/j.jmrt.2020.04.033
Abstract: Abstract The nano-TiC/Al composites with different alloying elements (Zn, Cu and Mg) were successfully prepared via a one-step method of reaction and densification in the reaction system of Al-Ti-C/CNTs. With the addition of alloying elements,…
read more here.
Keywords:
tic composites;
strengthening mechanism;
addition;
mechanism tic ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2020 at "Journal of prosthodontic research"
DOI: 10.1016/j.jpor.2020.01.004
Abstract: PURPOSE Not all elements with β-stabilizing properties in titanium alloys are suitable for biomaterial applications, because corrosion and wear processes release the alloying elements to the surrounding tissue. Chromium and molybdenum were selected as the…
read more here.
Keywords:
viability;
titanium alloys;
corrosion;
titanium ... See more keywords