Leverage of aluminium oxynitride on the impact resistance of Kevlar‐impregnated epoxy composites: Experimental and numerical evaluation under low‐velocity impact
Sign Up to like & getrecommendations! Published in 2024 at "Polymer Composites"
DOI: 10.1002/pc.28952
Abstract: The present work highlights the benefits of matrix strengthening through the inclusion of hard particles within the resin‐impregnated woven Kevlar mat. Aluminium Oxynitride (ALON) particles are added to epoxy resin by 5, 10, and 15… read more here.
Keywords: low velocity; alon; impact; velocity impact ... See more keywords
Effects of AlN content on mechanical and optical properties of AlON transparent ceramics
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.03.241
Abstract: Abstract In this study, AlON powders with different AlN contents were synthesized by the carbothermal reduction nitridation method and used to prepare transparent AlON ceramics. Lattice parameters of AlON powders were calculated from XRD patterns… read more here.
Keywords: alon; optical properties; aln content; alon ceramics ... See more keywords
In-situ synthesis of AlON reinforcing phases in resin bonded Al2O3 composite materials
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2017.03.211
Abstract: Abstract AlON reinforced Al2O3 composite materials were prepared from fused corundum, tabular alumina, active Al2O3 powders and phenolic resin through a carbothermal reduction nitridation process. The as-synthesized composite materials are characterized by X-ray diffraction, Scanning… read more here.
Keywords: resin; alon; al2o3 composite; reinforcing phases ... See more keywords
Luminescent properties and microstructure of SiC doped AlON: Eu2+ phosphors
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2017.07.156
Abstract: Abstract Superior thermal quenching and degradation of phosphors are required for long lifetime lighting devices, such as light-emitting diodes, which can be realized through composition modification. Here, Al-N bonds in AlON: Eu 2+ phosphors are… read more here.
Keywords: sic doped; alon; microstructure sic; luminescent properties ... See more keywords
A new and highly active sintering additive: SiO2 for highly-transparent AlON ceramic
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2019.02.106
Abstract: Abstract In the present work, highly-transparent aluminum oxynitride (AlON) ceramic has been fabricated by hot isostatic pressing sintering method. SiO2 was used for the first time as a sintering additive for producing highly-transparent AlON ceramics… read more here.
Keywords: alon; transparent alon; alon ceramic; sintering additive ... See more keywords
Green and Near-Infrared Dual-Band Photoluminescence in γ-AlON:Mn2+ Enables High-Level Anticounterfeiting and Encryption.
Sign Up to like & getrecommendations! Published in 2025 at "Inorganic chemistry"
DOI: 10.1021/acs.inorgchem.4c05002
Abstract: Multicolor luminescent materials hold great potential in high-level optical anticounterfeiting and encryption technologies. However, achieving multiple luminescence in a single phosphor with a single dopant, especially covering visible and invisible regions simultaneously, remains a standing… read more here.
Keywords: alon mn2; mn2; level; band ... See more keywords
Low-Temperature One-Step Growth of AlON Thin Films with Homogenous Nitrogen-Doping Profile by Plasma-Enhanced Atomic Layer Deposition.
Sign Up to like & getrecommendations! Published in 2017 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.7b12262
Abstract: The AlON film with homogeneous nitrogen-doping profile was grown by plasma-enhanced atomic layer deposition (PEALD) at low temperature. In this work, the precursors of the NH3 and the O2 were simultaneously introduced into the chamber… read more here.
Keywords: low temperature; alon; layer; film ... See more keywords
Progress and Challenges in the Synthesis of AlON Ceramics by Spark Plasma Sintering
Sign Up to like & getrecommendations! Published in 2017 at "Transactions of the Indian Ceramic Society"
DOI: 10.1080/0371750x.2016.1257956
Abstract: ABSTRACT γ-aluminium oxynitride (AlON) has an excellent thermal and chemical stability, which makes AlON an attractive candidate for a wide range of applications. Production of transparent AlON is extremely challenging because residual porosity must be… read more here.
Keywords: challenges synthesis; alon; plasma sintering; spark plasma ... See more keywords
Fast pressureless sintering of highly transparent AlON ceramics with broad optical transmission range
Sign Up to like & getrecommendations! Published in 2025 at "Journal of the American Ceramic Society"
DOI: 10.1111/jace.70147
Abstract: In our recent work, AlON ceramics with transmittance ≥80% at 380–4150 nm were fabricated via pressureless sintering at 1880°C for 2.5 h by reducing Y enrichment. To further improve transparency and gain a deeper insight… read more here.
Keywords: alon ceramics; pressureless sintering; transparent alon; densification ... See more keywords
Preparation and Piezocatalytic Performance of γ-AlON Particles for Dye-Pollutant Degradation Under Ultrasonic Vibration
Sign Up to like & getrecommendations! Published in 2024 at "Molecules"
DOI: 10.3390/molecules29235698
Abstract: Piezocatalytic materials have attracted widespread attention in the fields of clean energy and water treatment because of their ability to convert mechanical energy directly into chemical energy. In this study, γ-AlON particles synthesised using carbothermal… read more here.
Keywords: degradation; alon particles; particles dye; ultrasonic vibration ... See more keywords