Sign Up to like & get
recommendations!
0
Published in 2018 at "Ceramics International"
DOI: 10.1016/j.ceramint.2018.03.132
Abstract: Abstract The aim of this work was to study rapid sintering of alumina and zirconia ceramics of relatively large size and to reveal a role of surface diffusion on their densification. Pressure-less rapid rate sintering…
read more here.
Keywords:
zirconia ceramics;
pressure less;
rapid rate;
rate sintering ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2019.09.068
Abstract: Abstract Fracture toughness, bending strength, Young's modulus, hardness and subcritical crack growth were determined for six different alumina/zirconia composites. The bending strength was modelled using Weibull distribution. The fracture toughness, bending strength and resistance to…
read more here.
Keywords:
bending strength;
alumina zirconia;
zirconia composites;
mechanical properties ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2020 at "Journal of The European Ceramic Society"
DOI: 10.1016/j.jeurceramsoc.2020.01.026
Abstract: Abstract In this study slip cast alumina-zirconia materials were doped with nickel oxide and chromium oxide and sintered in air. Chromium oxide forms a solid solution while nickel oxide forms spinel with alumina. The sintered…
read more here.
Keywords:
selective laser;
induced autocatalytic;
alumina zirconia;
ceramic substrates ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2020 at "Journal of The European Ceramic Society"
DOI: 10.1016/j.jeurceramsoc.2020.06.044
Abstract: Abstract Laminates with alternating layers are well known from nature. The strongly bonded alumina/zirconia (Al2O3/ZrO2) layers can combine high fracture resistance with high strength and stiffness when properly tailored. The presence of compressive residual stresses…
read more here.
Keywords:
crack path;
alumina zirconia;
effect residual;
path ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2021 at "Journal of The European Ceramic Society"
DOI: 10.1016/j.jeurceramsoc.2021.01.045
Abstract: Abstract Partially and fully sintered alumina-zirconia composites (ATZ ceramics), with porosities decreasing from 53.5 to 1 %, have been prepared by uniaxial pressing and firing at 1000–1500 °C and characterized by the Archimedes method and…
read more here.
Keywords:
alumina zirconia;
zirconia composites;
zirconia;
composites atz ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2022 at "Materials"
DOI: 10.3390/ma15041390
Abstract: The alumina and zirconia surfaces were pretreated with chemical etching using alkaline mixtures of ammonia, hydrogen peroxide and sodium hydroxide, and followed with application of the powder layer of Ca-deficient hydroxyapatite (CDH). The influence of…
read more here.
Keywords:
zirconia;
alumina zirconia;
surface;
alkali treated ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2017 at "Nanomaterials"
DOI: 10.3390/nano7120419
Abstract: In this paper, an alumina-zirconia (Al2O3-ZrO2) nanolaminate dielectric was fabricated by spin-coating and the performance was investigated. It was found that the properties of the dielectric can be adjusted by changing the content of Al2O3/ZrO2…
read more here.
Keywords:
spin coating;
alumina zirconia;
fabricated spin;
dielectric fabricated ... See more keywords