Vibration Study on Aluminium Alloy 5083 Composite Reinforced with Montmorillonite
Sign Up to like & getrecommendations! Published in 2019 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-019-01697-x
Abstract: In this work, vibration behaviour of aluminium alloy 5083-reinforced nanoclay–montmorillonite nanocomposites was studied to have a better dynamic property for lightweight structural applications without affecting the mechanical property. Composite samples with various weight percentages of… read more here.
Keywords: alloy; vibration; alloy 5083; nanoclay ... See more keywords
Crack Propagation Behaviour in Thin Aluminium Alloy Sheet Repaired with Adhesively Bonded CFRP Patch
Sign Up to like & getrecommendations! Published in 2019 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-019-01847-1
Abstract: For reducing the crack tip stress intensity factor, adhesively bonded composite patches are employed for crack repair in thin structure. Experimental work was carried out to study environmental assisted cracking behaviour of crack repaired with… read more here.
Keywords: adhesively bonded; patch; aluminium alloy; behaviour ... See more keywords
Investigation on Microstructure and Mechanical Properties of Solution Heat-Treated and Multi Directional Forging-Processed LM-25 Aluminium Alloy
Sign Up to like & getrecommendations! Published in 2020 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-020-01924-w
Abstract: The experimental study of hypoeutectic Al-7.3Si alloy on microstructure and mechanical properties processed by MDF at room temperature was reported in this paper. A commercial LM-25 aluminium alloy ingot was melted in an electric casting… read more here.
Keywords: mechanical properties; aluminium alloy; microstructure mechanical; microscopy ... See more keywords
Fracture Toughness and Shear Strength of the Bonded Interface Between an Aluminium Alloy Skin and a FRP Patch
Sign Up to like & getrecommendations! Published in 2018 at "Journal of The Institution of Engineers (India): Series C"
DOI: 10.1007/s40032-018-0467-1
Abstract: The existing techniques to determine the fracture properties such as critical energy release rate in mode I (GIc) and mode II (GIIc) of an interface between two sheets of same material were modified to determine… read more here.
Keywords: aluminium; shear strength; aluminium alloy; alloy skin ... See more keywords
Joining of Aluminium Alloy and Steel by Laser Assisted Reactive Wetting
Sign Up to like & getrecommendations! Published in 2018 at "Lasers in Manufacturing and Materials Processing"
DOI: 10.1007/s40516-017-0049-8
Abstract: Compounds of dissimilar materials, like aluminium and steel offer an interesting opportunity for the automotive industry to reduce the weight of a car body. Thermal joining of aluminium and steel leads to the formation of… read more here.
Keywords: alloy steel; laser; aluminium alloy; steel ... See more keywords
Characterization of Fracture Toughness Properties of Aluminium Alloy for Pipelines
Sign Up to like & getrecommendations! Published in 2018 at "Experimental Techniques"
DOI: 10.1007/s40799-018-0280-z
Abstract: Continuous critical loading of pressure equipments can affect the structural stability of these plants. The structural stability and mechanical resistance under pressure loads can also be affected by defects. Fracture mechanics assumptions were applied to… read more here.
Keywords: alloy pipelines; toughness properties; characterization fracture; aluminium alloy ... See more keywords
Temperature dependence of film rupture and internal structural stability in liquid aluminium alloy foams
Sign Up to like & getrecommendations! Published in 2020 at "Acta Materialia"
DOI: 10.1016/j.actamat.2020.06.054
Abstract: Abstract The morphology of solid metallic foams is governed by the evolution of the cellular structure during the foaming process in the liquid state. We study quantitatively film ruptures in liquid aluminium alloy foams and… read more here.
Keywords: liquid aluminium; temperature; liquid; alloy foams ... See more keywords
The origins for tensile properties of selective laser melted aluminium alloy A357
Sign Up to like & getrecommendations! Published in 2017 at "Additive manufacturing"
DOI: 10.1016/j.addma.2017.08.007
Abstract: Abstract In this work the tensile behaviour of selective laser melted (SLMed) aluminium alloy A357 in the as-fabricated and heat-treated states is explained using scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), transmission electron microscopy… read more here.
Keywords: selective laser; microscopy; alloy a357; a357 ... See more keywords
Inhibitive effect of sodium molybdate on corrosion behaviour of AA6061 aluminium alloy in simulated concrete pore solutions
Sign Up to like & getrecommendations! Published in 2020 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2020.121463
Abstract: Abstract Corrosion inhibition of MoO42− for AA6061 aluminium alloy in simulated concrete pore solutions was investigated. Electrochemical methods were adopted to assess corrosion behaviour of AA6061 and surface characterizations were employed to obtain composition and… read more here.
Keywords: alloy simulated; corrosion; aluminium alloy; moo42 ... See more keywords
Flexural behaviour of concrete-filled aluminium alloy thin-walled SHS and RHS tubes
Sign Up to like & getrecommendations! Published in 2017 at "Engineering Structures"
DOI: 10.1016/j.engstruct.2017.01.036
Abstract: Abstract This paper presents an experimental study on flexural behaviour of concrete-filled aluminium alloy thin-walled square and rectangular hollow section (SHS and RHS) tubes subjected to in-plane bending. A total of 30 specimens including 20… read more here.
Keywords: concrete filled; concrete; flexural stiffness; aluminium alloy ... See more keywords
Strength of steel and aluminium alloy ship plating under combined shear and compression/tension
Sign Up to like & getrecommendations! Published in 2018 at "Engineering Structures"
DOI: 10.1016/j.engstruct.2018.03.051
Abstract: Abstract The load shortening curves are essential to the estimation of ultimate strength of ship structures under longitudinal bending in the simplified progressive collapse method. Longitudinal bending is the dominant load on ships structures, but… read more here.
Keywords: strength; compression tension; aluminium alloy; steel aluminium ... See more keywords