Fabrication of nanoporous GeOx supported Ag nanoparticle composite by dealloying of (Al0.6Ge0.3Mn0.1)98Ag2 amorphous alloy
Sign Up to like & getrecommendations! Published in 2017 at "Corrosion Science"
DOI: 10.1016/j.corsci.2017.06.022
Abstract: Abstract The present study shows that nanoporous GeO x supported Ag nanoparticle composite can be fabricated by one-pot dealloying of (Al 0.6 Ge 0.3 Mn 0.1 ) 98 Ag 2 amorphous alloy. As-melt-spun (Al 0.6… read more here.
Keywords: alloy; nanoparticle composite; fabrication nanoporous; precursor alloy ... See more keywords
Magnetoelastic and magnetocaloric properties of Tb62.5Co37.5 amorphous alloy
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2017.09.052
Abstract: Abstract In the present work, we report the outstanding magneto-elastic and magneto-caloric properties of a Tb-Co binary amorphous alloy. The glass forming ability (GFA) of Tb-Co binary alloys was studied and the best glass former… read more here.
Keywords: magneto elastic; magneto; magnetoelastic magnetocaloric; magneto caloric ... See more keywords
Kinetics of isochronal crystallization in a Fe-based amorphous alloy
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.04.133
Abstract: Abstract In this paper, the kinetics of isochronal differential scanning calorimetry of Fe48Cr15Mo14Y2C15B6 amorphous alloy was analyzed to understand the mechanism of crystallization. The crystallization process constituted of overlapping exothermic transformations occurring from 900 to… read more here.
Keywords: isochronal crystallization; crystallization based; crystallization; amorphous alloy ... See more keywords
Free volume distribution and structural inhomogeneity in Ni50V50 amorphous alloy
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.08.148
Abstract: Abstract The structure of Ni 50 V 50 amorphous alloy was investigated by using neutron, X-ray diffraction and reverse Monte Carlo (RMC) modelling. The RMC configuration was decomposed into polyhedral holes whose faces are all… read more here.
Keywords: polyhedral holes; distribution structural; volume distribution; free volume ... See more keywords
A new soft magnetic Fe75Ta5C20 amorphous alloy: Modelling and kinetics approach
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.09.188
Abstract: Abstract In this study, a new soft magnetic Fe75Ta5C20 amorphous alloy was fabricated through mechanical alloying. The microstructure evolution, magnetic properties and thermal behavior were investigated versus milling time by X-ray diffraction (XRD), field emission… read more here.
Keywords: microscopy; magnetic fe75ta5c20; fe75ta5c20 amorphous; soft magnetic ... See more keywords
The study of mechanical properties and corrosion behavior of the Fe-based amorphous alloy coatings using high velocity oxygen fuel spraying
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2021.159132
Abstract: Abstract The Fe-based amorphous alloy powders Fe40-Cr19-Mo18-C15-B8 are sprayed on 316 stainless steel substrates by high velocity oxygen fuel spraying (HVOF) process. The microstructure of coatings are analyzed by XRD, SEM, XPS and TEM. The… read more here.
Keywords: velocity oxygen; fuel spraying; oxygen fuel; based amorphous ... See more keywords
Fluxing purification and its effect on magnetic properties of high-B-s FeBPSiC amorphous alloy
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Magnetism and Magnetic Materials"
DOI: 10.1016/j.jmmm.2017.02.052
Abstract: Abstract A high- B s amorphous alloy with the base composition Fe 83 B 11 P 3 Si 2 C 1 was used to study the effects of fluxing purification on amorphous forming ability and… read more here.
Keywords: febpsic amorphous; high febpsic; fluxing purification; magnetic properties ... See more keywords
Influence of nitrogen ion implantation on corrosion behavior of Zr55Cu30Ni5Al10 amorphous alloy
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Non-Crystalline Solids"
DOI: 10.1016/j.jnoncrysol.2019.02.009
Abstract: Abstract The corrosion behavior of Zr55Cu30Ni5Al10 amorphous alloy after N+ ion implantation has been investigated in 1.0 M HNO3 medium. Specimens were implanted at various fluences such as 1 × 1016, 5 × 1016 and 1 × 1017 ions/cm2 using 100 keV N+ ion… read more here.
Keywords: ion implantation; ion; corrosion; implantation ... See more keywords
Correlation between the crystallized structure of Mg67Zn28Ca5 amorphous alloy and the corrosion behavior in simulated body fluid
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Non-crystalline Solids"
DOI: 10.1016/j.jnoncrysol.2020.120473
Abstract: Abstract The corrosion behavior of Mg-Zn-Ca amorphous alloys in simulated body fluid is of academic and engineering interests since they are potential biomaterials. The influence of the crystallized structure of the Mg67Zn28Ca5 amorphous alloy on… read more here.
Keywords: simulated body; alloy; corrosion; body fluid ... See more keywords
Neutron irradiation and high temperature effects on amorphous Fe-based nano-coatings on steel – A macroscopic assessment
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Nuclear Materials"
DOI: 10.1016/j.jnucmat.2017.03.030
Abstract: Abstract The study revealed that loss of ductility in an amorphous Fe-alloy coating on a steel substrate composite structure was essentially prevented from occurring, following radiation with modest neutron doses of ∼2 × 1018 n/cm2. At the higher… read more here.
Keywords: alloy; neutron irradiation; steel; irradiation high ... See more keywords
HPT-induced shear banding and nanoclustering in a TiNiCu amorphous alloy
Sign Up to like & getrecommendations! Published in 2017 at "Materials Letters"
DOI: 10.1016/j.matlet.2017.08.028
Abstract: Abstract Special TEM procedure is used to study in detail the microstructure of the melt-spun (MS) amorphous alloy Ti50Ni25Cu25 subjected to high-pressure torsion (HPT). The cross section of an HPT-processed disc-shaped sample is studied. Groups… read more here.
Keywords: hpt induced; alloy; hpt; hpt processed ... See more keywords