The anti-wear efficiency of boron succinimide on engine cylinder liner and piston ring surfaces
Sign Up to like & getrecommendations! Published in 2018 at "Journal of the Brazilian Society of Mechanical Sciences and Engineering"
DOI: 10.1007/s40430-018-1014-y
Abstract: Anti-wear additives are important components of the lubricating oils which protect the sliding surfaces from wear. Researches on developing the non-phosphorus catalysis-friendly anti-wear additive still continue due to government’s regulations. One way to provide non-phosphorus… read more here.
Keywords: anti wear; boron succinimide; engine; wear additive ... See more keywords
In Silico Modeling, Prediction, and Designing of Some Anti-wear Lubricant Additives
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Bio- and Tribo-Corrosion"
DOI: 10.1007/s40735-020-00399-y
Abstract: For many decades, scientists in the field of boundary tribology have been working to find an excellent and environment friendly anti-wear additives to minimize wearing of the boundary equipment by improving the anti-wearing ability of… read more here.
Keywords: anti wear; found better; wear lubricant; property ... See more keywords
Preparation, characterization, tribological and lubrication performances of Eu doped CaWO4 nanoparticle as anti-wear additive in water-soluble fluid for steel strip during hot rolling
Sign Up to like & getrecommendations! Published in 2021 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2020.148090
Abstract: Abstract Citric acid-synthesized Eu-doped CaWO4 (CaWO4:Eu3+) nanoparticles in acidity (pH = 1) and alkalinity solutions (pH = 10) were analyzed by SEM, TEM, XRD, and Raman. The tribological and hot rolling lubrication properties of nano-CaWO4:Eu3+ as anti-wear additives in… read more here.
Keywords: lubrication; anti wear; water; hot rolling ... See more keywords
Mechanically robust and abrasion-resistant polymer nanocomposites for potential applications as advanced clearance joints
Sign Up to like & getrecommendations! Published in 2019 at "Composites Part A: Applied Science and Manufacturing"
DOI: 10.1016/j.compositesa.2019.105607
Abstract: Abstract Despite exceptional dimensional stability, polyamide 6 (PA6) still suffers relatively low mechanical strength and stiffness as compared with metallic and ceramic materials, which thus significantly limits its engineering applications. Herein, we have demonstrated the… read more here.
Keywords: anti wear; pa6; robust abrasion; clearance ... See more keywords
Synthesis of hexadecylamine modified carbon dots and their friction-reducing and anti-wear performance in polyalphaolefin
Sign Up to like & getrecommendations! Published in 2021 at "Diamond and Related Materials"
DOI: 10.1016/j.diamond.2021.108238
Abstract: Abstract Hexadecylamine modified carbon dots (CDs-HA) were synthesized by pyrolyzing citric acid in HA. The friction-reducing and anti-wear properties of CDs-HA as lubricant additives of polyalphaolefin (PAO4) were evaluated on the universal mechanical tester under… read more here.
Keywords: hexadecylamine modified; performance; friction reducing; reducing anti ... See more keywords
Quantitative structure-properties relationship and molecular design of some anti-wear lubricant additives
Sign Up to like & getrecommendations! Published in 2020 at "South African Journal of Chemical Engineering"
DOI: 10.1016/j.sajce.2020.08.001
Abstract: Abstract In-silico QSPR and MD simulation methods were adopted to effectively design new lubricant anti-wear additive compounds as an alternative to zinc dialkyl dithiophosphate (ZDDP) which was reported to contribute to environmental pollution. Some QSPR… read more here.
Keywords: anti wear; wear; wear lubricant; lubricant additives ... See more keywords
Pressure-dependent anti-wear mechanisms of synthetic magnesium silicate hydroxide nanoparticles
Sign Up to like & getrecommendations! Published in 2019 at "Tribology International"
DOI: 10.1016/j.triboint.2019.03.016
Abstract: Abstract The paper describes series of four-ball tribological and dichromatic interference test results obtained under different contact pressures and performed for polyalphaolefin (PAO) suspended synthetic magnesium silicate hydroxide (MSH) nanoparticles. Results show that MSH as… read more here.
Keywords: magnesium silicate; synthetic magnesium; anti wear; pressure ... See more keywords
Tribochemistry of fluorinated ZnO nanoparticles and ZDDP lubricated interface and implications for enhanced anti-wear performance at boundary lubricated contacts
Sign Up to like & getrecommendations! Published in 2021 at "Wear"
DOI: 10.1016/j.wear.2021.203717
Abstract: Abstract Surface-capped zinc oxide (ZnO) nanoparticles were engineered to deliver beneficial anti-wear and anti-friction chemistries at sliding interfaces with a focus on potentially reducing environmentally hazardous zinc dialkyl dithiophosphate (ZDDP) additive in automotive lubricants, without… read more here.
Keywords: zno nanoparticles; performance; tribochemistry fluorinated; anti wear ... See more keywords
Combination of nano-particles of graphite and PTFE in the right amount for synergism as anti-wear and extreme pressure additive in oil
Sign Up to like & getrecommendations! Published in 2021 at "Surface Topography: Metrology and Properties"
DOI: 10.1088/2051-672x/ac2561
Abstract: Solid lubricants (SLs) are known to enhance the tribo-performance of oils significantly. Polytetrafluoroethylene (PTFE) particles have proved as an excellent extreme-pressure additive (EPA) but not as so good anti-wear additive (AWA). In contrast, the graphite… read more here.
Keywords: performance; extreme pressure; anti wear; pressure additive ... See more keywords
Study on anti-wear and friction-reducing compounding additives in lithium greases
Sign Up to like & getrecommendations! Published in 2023 at "Industrial Lubrication and Tribology"
DOI: 10.1108/ilt-11-2022-0350
Abstract: Purpose This paper aims to determine a suitable anti-wear and friction-reducing compounding additive for lithium greases (LG) by investigating the effects of three single additives potassium borate (PB), zinc dialkyl dithiophosphate and molybdenum dialkyl dithiophosphate… read more here.
Keywords: anti wear; lithium greases; friction reducing; friction ... See more keywords
Experimental investigation on anti-wear coating design for a small aviation kerosene piston engine
Sign Up to like & getrecommendations! Published in 2022 at "Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology"
DOI: 10.1177/13506501221074787
Abstract: The high temperature wear failure of piston-cylinder system is a severe threat to aviation kerosene piston engines. To design a suitable anti-wear coating for the cylinder wall of a small aviation kerosene piston engine, a… read more here.
Keywords: anti wear; wear coating; friction; kerosene piston ... See more keywords