Arc melting: a novel method to prepare homogeneous solid solutions of transition metal carbides (Zr, Ta, Hf)
Sign Up to like & getrecommendations! Published in 2019 at "Ceramics International"
DOI: 10.1016/j.ceramint.2019.01.238
Abstract: Abstract Carbides solid solutions of Zr, Hf and Ta were prepared using arc melting. Seven equimolar compositions of mono, binary and ternary carbides were fabricated by mixing monocarbides in a molten state. The solid solutions… read more here.
Keywords: novel method; arc melting; melting novel; solid solutions ... See more keywords
Synthesis of Be12Ti compound via arc melting or hot isostatic pressing
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2019.152919
Abstract: Abstract According to the recently proposed changes of the HCPB design concept of tritium breeding blanket for the DEMO fusion reactor, massive Be12Ti blocks are considered to be used for neutron multiplication. The paper compares… read more here.
Keywords: be12ti; arc melting; isostatic pressing; extrusion ... See more keywords
Thermal, microstructural and elastic modulus behavior of Ti50Ni50−xNbx (x = 0–25%at) shape memory alloys obtained by plasma arc melting
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2021.158970
Abstract: Abstract Ternary alloys based on the NiTi system with the addition of Nb have attracted attention for several areas of engineering, due to improvements in the shape memory properties. In this work, six TiNiNb compositions… read more here.
Keywords: ti50ni50 xnbx; arc melting; plasma arc; obtained plasma ... See more keywords
Mechanical, electrical and thermal properties of ZrC-ZrB2-SiC ternary eutectic composites prepared by arc melting
Sign Up to like & getrecommendations! Published in 2018 at "Journal of The European Ceramic Society"
DOI: 10.1016/j.jeurceramsoc.2018.04.028
Abstract: Abstract ZrC-ZrB2-SiC composites were prepared by arc-melting in Ar atmosphere using ZrC, ZrB2 and SiC as starting materials. The ternary eutectic composition of 20ZrC-30ZrB2-50SiC (mol%) was first identified. SiC about 7 μm in length and 500 nm… read more here.
Keywords: prepared arc; composites prepared; zrc zrb2; arc melting ... See more keywords
From arc-melted ingot to MTR fuel plate: A SEM/EBSD microstructural study of U3Si2
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Nuclear Materials"
DOI: 10.1016/j.jnucmat.2020.152224
Abstract: Abstract U3Si2/Al fuel plates are widely used in Material Testing Reactors (MTRs) as Low Enriched Uranium driver fuel. In this paper, a reinvestigation of the microstructure of U3Si2 particles is proposed to take full advantage… read more here.
Keywords: study u3si2; fuel; arc melting; cooling rate ... See more keywords
Spherical Particles in As-prepared Al65Cu25Fe15 Alloy by Arc-melting
Sign Up to like & getrecommendations! Published in 2020 at "Microscopy and Microanalysis"
DOI: 10.1017/s1431927620014002
Abstract: Al65Cu25Fe15 alloy is well known in the field of quasicrystalline material, mainly because of the early reports that it is suitable for preparing pure icosahedral quasicrystalline (IQC) phase [1]. However, followup studies have revealed a… read more here.
Keywords: arc melting; spherical particles; prepared al65cu25fe15; al65cu25fe15 alloy ... See more keywords
Optimized Route for the Fabrication of MnAlC Permanent Magnets by Arc Melting
Sign Up to like & getrecommendations! Published in 2022 at "Molecules"
DOI: 10.3390/molecules27238347
Abstract: The rare-earth-free MnAlC alloy is currently considered a very promising candidate for permanent magnet applications due to its high anisotropy field and relatively high saturation magnetization and Curie temperature, besides being a low-cost material. In… read more here.
Keywords: mnalc alloy; arc melting; fabrication; room temperature ... See more keywords
Reduced Thermal Conductivity in Nanostructured AgSbTe2 Thermoelectric Material, Obtained by Arc-Melting
Sign Up to like & getrecommendations! Published in 2022 at "Nanomaterials"
DOI: 10.3390/nano12213910
Abstract: AgSbTe2 intermetallic compound is a promising thermoelectric material. It has also been described as necessary to obtain LAST and TAGS alloys, some of the best performing thermoelectrics of the last decades. Due to the random… read more here.
Keywords: thermoelectric material; arc melting; reduced thermal; conductivity nanostructured ... See more keywords