Articles with "artificial aging" as a keyword



Photo by a2eorigins from unsplash

Mechanical properties of experimental composites containing bioactive glass after artificial aging in water and ethanol

Sign Up to like & get
recommendations!
Published in 2018 at "Clinical Oral Investigations"

DOI: 10.1007/s00784-018-2713-6

Abstract: ObjectivesTo evaluate the effect of bioactive glass 45S5 (BG) in experimental composites on flexural strength (FS), flexural modulus (FM), modulus of resilience (MR), and material reliability after artificial aging in water for 1, 7, and… read more here.

Keywords: bioactive glass; aging water; mechanical properties; experimental composites ... See more keywords
Photo from wikipedia

The influence of artificial aging on the microstructure and hardness of an Al–Zn–Mg–Zr alloy processed by equal-channel angular pressing

Sign Up to like & get
recommendations!
Published in 2019 at "Journal of Materials Science"

DOI: 10.1007/s10853-019-03646-x

Abstract: The effect of artificial aging on the microstructure and hardness of an ultrafine-grained (UFG) Al–4.8%Zn–1.2%Mg–0.14%Zr (wt%) alloy was studied. The UFG microstructure with an average grain size of about 260 nm was obtained by severe plastic… read more here.

Keywords: aging microstructure; dislocation density; artificial aging;
Photo from wikipedia

Mechanical stiffness of TMJ condylar cartilage increases after artificial aging by ribose.

Sign Up to like & get
recommendations!
Published in 2018 at "Archives of oral biology"

DOI: 10.1016/j.archoralbio.2017.12.010

Abstract: OBJECTIVE Aging is accompanied by a series of changes in mature tissues that influence their properties and functions. Collagen, as one of the main extracellular components of cartilage, becomes highly crosslinked during aging. In this… read more here.

Keywords: stiffness; number crosslinks; stiffness ratio; artificial aging ... See more keywords
Photo by possessedphotography from unsplash

Influence of artificial aging on corrosion of abraded Al-Zn-Mg-Cu alloys

Sign Up to like & get
recommendations!
Published in 2021 at "Corrosion Science"

DOI: 10.1016/j.corsci.2021.109745

Abstract: Abstract Surface abrasion has been shown to create altered surface layers (ASLs) that are hundreds of nm thick on all types of Al alloys. Such ASLs have lower corrosion resistance than the underlying substrate of… read more here.

Keywords: influence artificial; artificial aging; aging corrosion; abraded alloys ... See more keywords
Photo from archive.org

Natural and artificial aging in Mg-Gd binary alloys

Sign Up to like & get
recommendations!
Published in 2018 at "Journal of Alloys and Compounds"

DOI: 10.1016/j.jallcom.2017.12.026

Abstract: Abstract Early precipitation stages are now frequently observed in Mg alloys with rare earth due to a development of new microscopy techniques. Information about a very early precipitation at room temperature (i.e. natural aging, NA),… read more here.

Keywords: microscopy; precipitation; artificial aging; binary alloys ... See more keywords
Photo from wikipedia

Creep behaviors of a highly concentrated Mg-18 wt%Gd binary alloy with and without artificial aging

Sign Up to like & get
recommendations!
Published in 2019 at "Journal of Alloys and Compounds"

DOI: 10.1016/j.jallcom.2018.10.013

Abstract: Abstract In this work, a highly concentrated Mg-18 wt%Gd binary alloy was prepared and its tensile creep behaviors were studied. Both as-solution (AS) and as-aged (AA) samples were subjected to creep tests at 523 K under various… read more here.

Keywords: artificial aging; creep behaviors; highly concentrated; binary alloy ... See more keywords
Photo by maximalfocus from unsplash

Comparison between Natural and Artificial Aging of Polyethylene Textiles for the Design of Mosquito-proof Shield Adapted to Tropical Environment

Sign Up to like & get
recommendations!
Published in 2020 at "Microscopy and Microanalysis"

DOI: 10.1017/s1431927620000434

Abstract: This study is part of a project initiated by the ARS (Agence Regional de la Sante) in Guadeloupe to fight against the spread of the mosquito Aedes aegypti in the past years. These mosquitoes are… read more here.

Keywords: mosquito; proof shield; mosquito proof; artificial aging ... See more keywords
Photo from wikipedia

Biochar Aging: Mechanisms, Physicochemical Changes, Assessment, And Implications for Field Applications.

Sign Up to like & get
recommendations!
Published in 2020 at "Environmental science & technology"

DOI: 10.1021/acs.est.0c04033

Abstract: Biochar has triggered a black gold rush in environmental studies as a carbon-rich material with well-developed porous structure and tunable functionality. While much attention has been placed on its apparent ability to store carbon in… read more here.

Keywords: biochar aging; mechanisms physicochemical; field; aging mechanisms ... See more keywords
Photo by ldxcreative from unsplash

Artificial Aging of Thin Films of the Indium-Free Transparent Conducting Oxide SrVO3.

Sign Up to like & get
recommendations!
Published in 2023 at "ACS applied materials & interfaces"

DOI: 10.1021/acsami.3c02421

Abstract: SrVO3 (SVO) is a prospective candidate to replace the conventional indium tin oxide (ITO) among the new generation of transparent conducting oxide (TCO) materials. In this study, the structural, electrical, and optical properties of SVO… read more here.

Keywords: conducting oxide; artificial aging; aging thin; thin films ... See more keywords
Photo from wikipedia

Distilled beverage aging: A review on aroma characteristics, maturation mechanisms, and artificial aging techniques.

Sign Up to like & get
recommendations!
Published in 2022 at "Comprehensive reviews in food science and food safety"

DOI: 10.1111/1541-4337.13080

Abstract: The market value of distilled beverage relies on its quality with a major contribution of distinctive and fascinating aromas. The aroma of distilled beverage is built on the basis of chemical components and can be… read more here.

Keywords: distilled beverage; artificial aging; aroma; beverage ... See more keywords
Photo from wikipedia

Implant deformation and implant-abutment fracture resistance after standardized artificial aging: An in vitro study.

Sign Up to like & get
recommendations!
Published in 2022 at "Clinical implant dentistry and related research"

DOI: 10.1111/cid.13157

Abstract: BACKGROUND AND PURPOSE Zirconia abutments have been widely adopted in clinical implant practice. The unique mechanical properties of zirconia may significantly affect the long-term prognosis of implant treatments. The purpose of this study was to… read more here.

Keywords: artificial aging; deformation; one piece; fracture resistance ... See more keywords