Corrosion resistant nickel coating with strong adhesion on AZ31B magnesium alloy prepared by an in-situ shot-peening-assisted cold spray
Sign Up to like & getrecommendations! Published in 2018 at "Corrosion Science"
DOI: 10.1016/j.corsci.2018.04.018
Abstract: Abstract A 150 μm thick fully dense Ni coating was deposited on AZ31B magnesium alloy by a newly developed in-situ shot-peening-assisted cold spray process. Strong adhesion strength of Ni coating (>65.4 MPa) was achieved. The present Ni… read more here.
Keywords: spray; situ shot; magnesium; corrosion ... See more keywords
Three-point-bending fatigue behavior of AZ31B magnesium alloy based on infrared thermography technology
Sign Up to like & getrecommendations! Published in 2017 at "International Journal of Fatigue"
DOI: 10.1016/j.ijfatigue.2016.10.013
Abstract: Abstract The fatigue behavior of the AZ31B magnesium alloy subjected to three-point-bending tests was studied. Real-time recording of the surface-temperature-evolution data of specimens was obtained using the infrared thermography technology during fatigue. The characteristics of… read more here.
Keywords: magnesium alloy; alloy; az31b magnesium; fatigue behavior ... See more keywords
Air-cooling analysis of AZ31B magnesium alloy plate: Experimental verification, numerical simulation and mathematical modeling
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2016.11.017
Abstract: Abstract The air-cooling transport process of AZ31B magnesium alloy plate was investigated and carried out under different initial cooling temperatures and different sample sizes at a transport velocity of 0.3 m/s. In order to provide the… read more here.
Keywords: air; magnesium alloy; plate; az31b magnesium ... See more keywords
Effects of cold and warm cross-rolling on microstructure and texture evolution of AZ31B magnesium alloy sheet
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Magnesium and Alloys"
DOI: 10.1016/j.jma.2018.04.004
Abstract: Abstract Mg alloys conventionally rolled often present strong basal textures that affect negatively further deformations, limiting their applications. The present research found that cross-rolling experiences in adequate conditions can weaken those intense basal textures as… read more here.
Keywords: cross rolling; microstructure texture; magnesium alloy; az31b magnesium ... See more keywords
Effect of TiO2 nanoparticles addition on microstructure and mechanical properties of dissimilar friction stir welded AA6063-T4 aluminum alloy and AZ31B-O magnesium alloy
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2019.01.023
Abstract: Abstract In this research, dissimilar AA6063-T4 aluminum alloy and AZ31B-O magnesium alloy sheets were joined using friction stir welding (FSW) by incorporating the TiO2 nanoparticles to the interface of weld joints through creating a novel… read more here.
Keywords: az31b magnesium; aa6063 aluminum; microstructure; aluminum alloy ... See more keywords
Wear behavior of HPT processed UFG AZ31B magnesium alloy
Sign Up to like & getrecommendations! Published in 2018 at "Materials Letters"
DOI: 10.1016/j.matlet.2018.05.076
Abstract: Abstract Dry sliding wear behavior of ultrafine-grained (UFG) AZ31B magnesium alloy processed by high pressure torsion (HPT) has been investigated against bearing steel ball at room temperature. The HPT process progressed with formation of twins… read more here.
Keywords: hpt; wear behavior; magnesium alloy; az31b magnesium ... See more keywords
The effect of friction stir process on the mechanical, tribological, and biocompatibility properties of AZ31B magnesium alloy as a biomaterial: A pilot study
Sign Up to like & getrecommendations! Published in 2022 at "Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine"
DOI: 10.1177/09544119221135687
Abstract: Recently, AZ31B magnesium alloy has been widely employed in automotive, aerospace, and bio implant industries due to its light-weight and biocompatibility properties. However, the equilibrium of ductility and strength of this material and the negativity… read more here.
Keywords: alloy; friction; biocompatibility; biocompatibility properties ... See more keywords
Effect of electropulsing treatment on the recovery of AZ31B magnesium alloy
Sign Up to like & getrecommendations! Published in 2022 at "Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications"
DOI: 10.1177/14644207221085650
Abstract: Electropulsing treatment (EPT) is a potential annealing method with advantages of performance improvement and equipment simplification. In the current paper, the effect of EPT on the recovery of AZ31B magnesium alloy during a two-stage plastic… read more here.
Keywords: az31b magnesium; magnesium alloy; effect; recovery ... See more keywords
Investigation on ballistic behaviour of friction stir welded rolled AZ31B magnesium alloy
Sign Up to like & getrecommendations! Published in 2022 at "Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications"
DOI: 10.1177/14644207221095209
Abstract: In this paper, an attempt was made to study the ballistic resistance of Friction Stir Welded (FSW) AZ31B magnesium alloy. The base metal AZ31B plates were sliced to required size and FSW was carried out… read more here.
Keywords: stir welded; fsw; friction stir; magnesium alloy ... See more keywords
Thermographic Study of AZ31B Magnesium Alloy under Cyclic Loading: Temperature Evolution Analysis and Fatigue Limit Estimation
Sign Up to like & getrecommendations! Published in 2020 at "Materials"
DOI: 10.3390/ma13225209
Abstract: In this paper, infrared thermography was employed to study the fatigue process of AZ31B magnesium alloy. In order to eliminate the interference caused by the temperature rise of the fixture, a data processing method was… read more here.
Keywords: magnesium alloy; az31b magnesium; temperature; fatigue limit ... See more keywords
Influence of Polyols on the In Vitro Biodegradation and Bioactivity of 58S Bioactive Sol–Gel Coatings on AZ31B Magnesium Alloys
Sign Up to like & getrecommendations! Published in 2023 at "Polymers"
DOI: 10.3390/polym15051273
Abstract: The mechanical qualities of AZ31B magnesium alloys make them a promising material for biodegradable metallic implants. However, rapid degradation limits the application of these alloys. In the present study, 58S bioactive glasses were synthesized using… read more here.
Keywords: 58s bioactive; sol gel; magnesium alloys; az31b magnesium ... See more keywords