Design and deformation behaviour of a laminar B4C/Al composite
Sign Up to like & getrecommendations! Published in 2018 at "Ceramics International"
DOI: 10.1016/j.ceramint.2018.07.185
Abstract: Abstract A novel laminar B4C/Al composite was fabricated by vacuum hot-press sintering at a temperature of 680 °C, dwell time of 120 min, and pressure of 30 MPa. The measured Vickers hardness reached maximum and minimum values of… read more here.
Keywords: laminar b4c; b4c; deformation behaviour; design deformation ... See more keywords
Microstructural investigation of Al-Mg/B4C composite deformed at elevated temperature
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.05.324
Abstract: Abstract The microstructure evolution of Al-3wt.%Mg reinforced with 10 vol% B4C during isothermal compression at temperatures ranging 300–500 °C at strain rates of 0.001–10 s−1 was investigated by electron backscatter diffraction (EBSD). According to the results, at… read more here.
Keywords: investigation b4c; grain size; microstructural investigation; grain ... See more keywords
Influence of multi-pass FSP on the microstructure, mechanical properties and tribological characterization of Al/B4C composite fabricated by accumulative roll bonding (ARB)
Sign Up to like & getrecommendations! Published in 2019 at "Surface and Coatings Technology"
DOI: 10.1016/j.surfcoat.2019.01.043
Abstract: Abstract This paper aims to understand the impact of post-multi-pass friction stir processing (FSP) on the microstructure, mechanical, wear and fracture behaviors of the fabricated 10 cycle-accumulative roll bonded Al-2%B4C composites. The increase in the… read more here.
Keywords: fsp microstructure; b4c composite; multi pass; accumulative roll ... See more keywords
Fabrication and characterization of nanoparticle MgO/B4C composite by mechanochemical method
Sign Up to like & getrecommendations! Published in 2017 at "Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering"
DOI: 10.1177/0954408916629106
Abstract: In this study, nanoparticle boron carbide was produced after the reduction of boron oxide with magnesium under the presence of carbon by using mechanochemical synthesis method. During the synthesis processing, microstructure and phase transformations of… read more here.
Keywords: mgo b4c; b4c composite; nanoparticle; method ... See more keywords