Controlling Hazards Release of Biomass‐Based Melamine Composite Tableware‐Based on the Synergistic Effect of Corn Starch and Bamboo Fiber
Sign Up to like & getrecommendations! Published in 2025 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202500236
Abstract: With the enhancement of environmental concerns, tableware made with renewable resources are in high demand. However, it is found that for biomass‐based melamine tableware (CMFs), there is a risk of accelerating the release of melamine… read more here.
Keywords: release; corn; bamboo fiber; tableware ... See more keywords
High‐Temperature Tribological Performance of Short Bamboo Fiber‐Reinforced Polymer Composite
Sign Up to like & getrecommendations! Published in 2025 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.58081
Abstract: This study investigates the ball‐on‐disk tribological behavior of short bamboo fiber‐reinforced polypropylene matrix composite under temperatures ranging from room temperature to the high temperature of 175°C, with a particular focus on elucidating their high‐temperature failure… read more here.
Keywords: temperature; short bamboo; bamboo fiber; high temperature ... See more keywords
Understanding the potential of bamboo fibers in the USA: A comprehensive techno‐economic comparison of bamboo fiber production through mechanical and chemical processes
Sign Up to like & getrecommendations! Published in 2024 at "Biofuels"
DOI: 10.1002/bbb.2652
Abstract: The growing interest in bamboo fibers for pulp, paper, and board production in the USA necessitates a comprehensive financial viability assessment. This study conducts a detailed technoeconomic analysis (TEA) of bamboo fiber production, primarily for… read more here.
Keywords: bamboo; pulp; fiber production; bamboo fibers ... See more keywords
Sustainable improvement in the polylactic acid properties of 3D printing filaments: The role of bamboo fiber and epoxidized soybean oil‐branched cardanol ether compatibilizer
Sign Up to like & getrecommendations! Published in 2024 at "Polymer Composites"
DOI: 10.1002/pc.28565
Abstract: Polylactic acid (PLA) is the prevailing raw material for fused deposition modeling (FDM) 3D printing filaments, offering benefits such as a low printing temperature, minimal shrinkage, and biodegradability. However, this material has challenges such as… read more here.
Keywords: polylactic acid; epoxidized soybean; bamboo; bamboo fiber ... See more keywords
Advancing Polypropylene/Bamboo Fiber Composites With a Novel PPgMA Pre‐Coating Technique
Sign Up to like & getrecommendations! Published in 2025 at "Polymer Composites"
DOI: 10.1002/pc.70169
Abstract: This study presents an innovative approach to enhancing the efficiency of maleic anhydride (MA) content in polypropylene/bamboo fiber composites (PP/BF) without compromising the inherent properties of PP. While maleic anhydride‐grafted polypropylene (PPgMA) is widely used… read more here.
Keywords: pre coating; bamboo fiber; ppgma; fiber composites ... See more keywords
Investigation on the Preparation and Adsorption Performance of Bamboo Fiber Based Activated Carbon
Sign Up to like & getrecommendations! Published in 2019 at "Fibers and Polymers"
DOI: 10.1007/s12221-019-8336-y
Abstract: In this work, an approach was explored to make natural fiber based activated carbon with high adsorption capacity for treating dyeing wastewater. Bamboo fiber based activated carbon (BFAC) was prepared by bamboo fiber extracted from… read more here.
Keywords: bamboo fiber; adsorption; fiber based; fiber ... See more keywords
Effect of Industrial Waste on Chemical and Water Absorption of Bamboo Fiber Reinforced Composites
Sign Up to like & getrecommendations! Published in 2019 at "Silicon"
DOI: 10.1007/s12633-019-00108-6
Abstract: Cement by-pass dust (CBPD) is a by-product of cement manufacturing plants, whereas the cenosphere flyash is generated by the coal based power plants. Cenosphere flyash and CBPD were used as particulate fillers to manufacture the… read more here.
Keywords: bamboo fiber; water; fiber reinforced; chemical ... See more keywords
Enhanced electromagnetic interference shielding capability in bamboo fiber@polyaniline composites through microwave reflection cavity design
Sign Up to like & getrecommendations! Published in 2019 at "Composites Science and Technology"
DOI: 10.1016/j.compscitech.2019.04.023
Abstract: Abstract Natural, electrical insulating bamboo fiber (BBF) was selected as cost-effective frameworks to fabricate electromagnetic interference (EMI) shielding composites. The compacted polyaniline (PANI) layer was formed on the surface of BBF through an in-situ polymerization… read more here.
Keywords: microwave reflection; bbf; reflection cavity; bamboo fiber ... See more keywords
Acid resistance of metakaolin-based, bamboo fiber geopolymer composites
Sign Up to like & getrecommendations! Published in 2021 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2021.124194
Abstract: Abstract This study focuses on calcined kaolin, commercial sodium silicate, and Amazonian bamboo to make geopolymer. The durability of geopolymer matrix (GP) and bamboo fiber geopolymer composite (GPBF) materials was analyzed by studying the resistance… read more here.
Keywords: geopolymer; gpbf; bamboo fiber; fiber geopolymer ... See more keywords
Bioinspired polydopamine deposition and silane grafting modification of bamboo fiber for improved interface compatibility of poly (lactic acid) composites.
Sign Up to like & getrecommendations! Published in 2021 at "International journal of biological macromolecules"
DOI: 10.1016/j.ijbiomac.2021.12.119
Abstract: The surface of bamboo fiber (BF) has poor interface compatibility with the surface of the poly (lactic acid) (PLA), which compromises composite performance. In this study, a bioinspired polydopamine (PDA) function coating was constructed on… read more here.
Keywords: lactic acid; bamboo fiber; surface; interface compatibility ... See more keywords
Preparation and characterization of polylactic acid-g-bamboo fiber based on in-situ solid phase polymerization
Sign Up to like & getrecommendations! Published in 2018 at "Industrial Crops and Products"
DOI: 10.1016/j.indcrop.2018.07.024
Abstract: Abstract This study details effort to improve the interfacial compatibility of bamboo fiber/polylactic acid composites, by attaching the molecular chain of polylactic acid (PLA) to bamboo fibers (BF). The BF was pretreated using a 1 wt%… read more here.
Keywords: bamboo fiber; pla; polylactic acid; spectroscopy ... See more keywords