Effects of photodegradation performance with PLA‐containing samples on double injection molding
Sign Up to like & getrecommendations! Published in 2024 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.55523
Abstract: The influence of different overlay layers (ABS, PC, and PLA) is investigated on the photodegradation behavior of poly(lactic acid) (PLA)‐containing samples in double injection molding, and PLA/PLA samples serve as the control group. In terms… read more here.
Keywords: double injection; pla containing; base layer; pla ... See more keywords
Effects of Ceramic Waste, Marble Dust, and Cement in Pavement Sub-base Layer
Sign Up to like & getrecommendations! Published in 2020 at "Geotechnical and Geological Engineering"
DOI: 10.1007/s10706-020-01211-x
Abstract: In this work, the effects of ceramic waste (CW), marble dust (MD), and cement on the performance of road sub-base layer characteristics were investigated. Industries routinely produce CW and MD, and the disposal of these… read more here.
Keywords: waste; cement; base; base layer ... See more keywords
Experimental and Field Investigation of Road Mesh Reinforcement in Flexible Pavements
Sign Up to like & getrecommendations! Published in 2020 at "Indian Geotechnical Journal"
DOI: 10.1007/s40098-020-00430-6
Abstract: The most acceptable combination of layer thickness and types of materials used in the different layers of pavement along with an estimated traffic to be carried, during the service life of the pavement, complete the… read more here.
Keywords: base layer; layer; road mesh; performance ... See more keywords
Effects of interlayer bonding conditions between semi-rigid base layer and asphalt layer on mechanical responses of asphalt pavement structure
Sign Up to like & getrecommendations! Published in 2017 at "International journal of pavement research and technology"
DOI: 10.1016/j.ijprt.2017.02.003
Abstract: Abstract Shear spring compliance was adopted to simulate interlayer bonding conditions between semi-rigid base layer and asphalt layer. The parametric sensitivity of the thickness and modulus of base layer and surface layer, and the horizontal… read more here.
Keywords: layer; bonding conditions; asphalt layer; interlayer bonding ... See more keywords
Unravelling Resistive Switching Mechanism in ZnO NW Arrays: The Role of the Polycrystalline Base Layer
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Physical Chemistry C"
DOI: 10.1021/acs.jpcc.7b09978
Abstract: The physical mechanism involved in resistive switching phenomena occurring in devices based on ZnO nanowire (NW) arrays may vary considerably, also depending on the structure of the switching layer. In particular, it is shown here… read more here.
Keywords: mechanism; zno; base layer; zno arrays ... See more keywords
A study of moisture-induced cracking during a short-term rain event in a pre-cracked asphalt concrete pavement with an expansive base layer
Sign Up to like & getrecommendations! Published in 2020 at "International Journal of Pavement Engineering"
DOI: 10.1080/10298436.2018.1527333
Abstract: ABSTRACT A model is developed herein for predicting moisture-induced crack growth during a short-term rain event, considered herein to be of duration not greater than 2 hr, in a pre-cracked asphalt concrete pavement built on an… read more here.
Keywords: moisture; pavement; layer; asphalt concrete ... See more keywords
Performance evaluation of geosynthetic reinforced marginal material as base layer over weak subgrade
Sign Up to like & getrecommendations! Published in 2024 at "International Journal of Pavement Engineering"
DOI: 10.1080/10298436.2024.2318605
Abstract: ABSTRACT The availability of quality materials for construction has been an issue in some regions. This scarcity obliged using marginal materials reinforced with geosynthetic materials as one of the quests for sustainability in the pavement… read more here.
Keywords: material; base; reduction; base layer ... See more keywords
Feasibility study of roller compacted concrete with recycled aggregates as base layer for light-traffic roads
Sign Up to like & getrecommendations! Published in 2020 at "Road Materials and Pavement Design"
DOI: 10.1080/14680629.2018.1483257
Abstract: This research aims to produce roller compacted concrete (RCC) using recycled aggregates (RAs) from construction and demolition waste (CDW) with low cement content. Previous research has confirmed that RA performs favourably when applied to a… read more here.
Keywords: light traffic; recycled aggregates; cement; feasibility ... See more keywords
Design and Analysis of Ge/Ge1-xSnx/Ge Heterojunction Phototransistor for MIR Wavelength Biological Applications
Sign Up to like & getrecommendations! Published in 2020 at "IEEE Sensors Journal"
DOI: 10.1109/jsen.2019.2960006
Abstract: This work presents the influence of lateral scaling such as emitter layer thickness and base layer thickness on the responsivity spectra and frequency response of Ge/ Ge1-x Snx/Ge p-n-p heterojunction phototransistor (HPT), a generalized detector… read more here.
Keywords: layer thickness; hpt; base layer; layer ... See more keywords
Bitumen-Based Poroelastic Pavements: Successful Improvements and Remaining Issues
Sign Up to like & getrecommendations! Published in 2023 at "Materials"
DOI: 10.3390/ma16030983
Abstract: This article presents the development process of designing and testing poroelastic pavement based on highly polymer-modified bitumen. Poroelastic wearing course was composed of mineral and rubber aggregate mixed with highly polymer-modified bitumen, in contrast to… read more here.
Keywords: poroelastic mixture; bitumen based; layer; based poroelastic ... See more keywords
Quality Evaluation of New Types of Core Layers Based on Different Thicknesses of Veneers for Flooring Materials
Sign Up to like & getrecommendations! Published in 2024 at "Materials"
DOI: 10.3390/ma17235881
Abstract: Problems with the availability of raw materials on the Polish market have forced wood industry producers to search for new, previously unused species of wood that meet the functional requirements of the target products. Therefore,… read more here.
Keywords: quality; new types; control; base layer ... See more keywords