Clinical evaluation of zirconia-based all-ceramic single crowns: an up to 12-year retrospective cohort study
Sign Up to like & getrecommendations! Published in 2017 at "Clinical Oral Investigations"
DOI: 10.1007/s00784-017-2142-y
Abstract: ObjectivesThis study aims to investigate the incidence of clinical complications with tooth-supported zirconia-based all-ceramic single crowns and identify pertinent risk parameters.Materials and methodsA retrospective cohort study (May 2004 to April 2016) utilizing clinical records of… read more here.
Keywords: zirconia based; single crowns; study; ceramic single ... See more keywords
The effect of MgO addition on the properties of alumina-based ceramic cores prepared via sol–gel process
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Sol-Gel Science and Technology"
DOI: 10.1007/s10971-020-05300-4
Abstract: Alumina-based ceramic cores with MgO addition were prepared using sol–gel process. Prior to magnesia addition, the suitable amount of titania content was determined in the previous research, where it was found that the body with… read more here.
Keywords: mgo; alumina based; addition; ceramic cores ... See more keywords
The effect of particle size and phosphorous content in biomineralization media on in vitro bioactivity of monticellite based ceramic powders obtained from boron derivative waste
Sign Up to like & getrecommendations! Published in 2021 at "Boletin De La Sociedad Espanola De Ceramica Y Vidrio"
DOI: 10.1016/j.bsecv.2020.01.007
Abstract: Abstract The effect of particle size and phosphorous content in biomineralization media on in vitro bioactivity of monticellite based ceramic powders was investigated. Monticellite based ceramic powder was synthesized at 800 °C for 4 h using boron… read more here.
Keywords: particle size; monticellite based; biomineralization media; based ceramic ... See more keywords
Effect of current pattern and conductive phase on sintering behavior of Si3N4-based ceramic composite
Sign Up to like & getrecommendations! Published in 2018 at "Ceramics International"
DOI: 10.1016/j.ceramint.2018.02.177
Abstract: Abstract The objective of this investigation is to provide insights into the phenomenon and mechanism(s) involved in the current-assisted sintering of Si 3 N 4 -based ceramic composite. The effects of continuous electric current, pulsed… read more here.
Keywords: phase; pattern conductive; current pattern; ceramic composite ... See more keywords
Effect of Co on thermal and mechanical properties of Si3N4 based ceramic tool material
Sign Up to like & getrecommendations! Published in 2019 at "Ceramics International"
DOI: 10.1016/j.ceramint.2019.06.198
Abstract: Abstract The use of ceramic cutting tools is limited due to their inherent brittleness. In this paper, metal phase Co is considered to strengthen Si3N4 based ceramic tool materials. The effects of Co on room-temperature… read more here.
Keywords: based ceramic; ceramic tool; temperature; material ... See more keywords
Comparison of experimental and simulation results on catalytic HI decomposition in a silica-based ceramic membrane reactor
Sign Up to like & getrecommendations! Published in 2019 at "International Journal of Hydrogen Energy"
DOI: 10.1016/j.ijhydene.2019.09.132
Abstract: Abstract In this study, the catalytic decomposition of hydrogen iodide was theoretically and experimentally investigated in a silica-based ceramic membrane reactor to assess the reactor's suitability for thermochemical hydrogen production. The silica membranes were fabricated… read more here.
Keywords: silica; silica based; membrane reactor; ceramic membrane ... See more keywords
High-temperature sulfur corrosion behavior of h-BN-based ceramic coating prepared by slurry method
Sign Up to like & getrecommendations! Published in 2018 at "Materials Chemistry and Physics"
DOI: 10.1016/j.matchemphys.2017.12.025
Abstract: Abstract The heating surface of a coal-fired boiler is susceptible to high-temperature sulfur corrosion. To investigate and address this problem, a h-BN-based ceramic coating was prepared on the surface of a 20CrMn steel sheet using… read more here.
Keywords: temperature; sulfur corrosion; high temperature; temperature sulfur ... See more keywords
High-Performance Spectrally Selective Absorber Using the ZrB2-Based All-Ceramic Coatings.
Sign Up to like & getrecommendations! Published in 2021 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.1c08947
Abstract: Enhancing the spectral selectivity and thermal stability of the absorber used in the concentrated solar power system would boom the conversion efficiency of solar energy to electricity. The ceramic coatings possess excellent thermal stability in… read more here.
Keywords: selective absorber; ceramic coatings; zrb2 based; spectrally selective ... See more keywords
Fe3O4@HKUST-1 and Pd/Fe3O4@HKUST-1 as magnetically recyclable catalysts prepared via conversion from a Cu-based ceramic
Sign Up to like & getrecommendations! Published in 2017 at "CrystEngComm"
DOI: 10.1039/c7ce00390k
Abstract: Nanocomposites obtained by integrating iron oxide magnetic nanoparticles (Fe3O4) into a metal–organic framework (HKUST-1 or Cu3(BTC)2, BTC = 1,3,5-benzenetricarboxylate) are synthesized through conversion from a composite of a Cu-based ceramic material and Fe3O4. In situ… read more here.
Keywords: hkust fe3o4; conversion; fe3o4; hkust ... See more keywords
Characterization of AlN-based ceramic composites for use as millimeter-wave susceptor materials at high temperature: Dielectric properties of AlN:Mo with 0.25 vol% to 4.0 vol% Mo from 25 to 550 °C
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Research"
DOI: 10.1557/jmr.2019.177
Abstract: read more here.
Keywords: composites use; ceramic composites; based ceramic; aln based ... See more keywords
Microstructure and Mechanical Properties of Spark Plasma Sintered Si3N4/WC Ceramic Tools
Sign Up to like & getrecommendations! Published in 2019 at "Materials"
DOI: 10.3390/ma12111868
Abstract: Silicon nitride (Si3N4) based ceramic tools exhibit good machinability in cutting materials such as gray cast iron, ductile iron, malleable cast iron, and superalloys due to excellent high-temperature mechanical properties. In this paper, high-performance Si3N4-based… read more here.
Keywords: ceramic tools; microstructure mechanical; mechanical properties; si3n4 based ... See more keywords