Identification of Paddy Stubble Burnt Activities Using Temporal Class-Based Sensor-Independent Indices Database: Modified Possibilistic Fuzzy Classification Approach
Sign Up to like & getrecommendations! Published in 2019 at "Journal of the Indian Society of Remote Sensing"
DOI: 10.1007/s12524-019-01093-4
Abstract: In this study, temporal multispectral Sentinel-2A/B data have been used for identification of burnt paddy field using temporal Class-Based Sensor-Independent Indices Database using modified possibilitic fuzzy classification approach. The practice of stubble burning was found… read more here.
Keywords: burnt; class based; temporal class; using temporal ... See more keywords
YSZ-based sensor using Cr-Fe-based spinel-oxide electrodes for selective detection of CO.
Sign Up to like & getrecommendations! Published in 2017 at "Analytica chimica acta"
DOI: 10.1016/j.aca.2017.06.010
Abstract: A selective carbon monoxide (CO) sensor was developed by the use of both of CuCrFeO4 and CoCrFeO4 as the sensing electrode (SE) for yttria-stabilized zirconia (YSZ)-based potentiometric sensor. The sensing-characteristic examinations of the YSZ-based sensors… read more here.
Keywords: using based; sensor using; based spinel; based sensor ... See more keywords
MoS2 QDs-Based sensor for measurement of fluazinam with triple signal output.
Sign Up to like & getrecommendations! Published in 2020 at "Analytica chimica acta"
DOI: 10.1016/j.aca.2020.02.028
Abstract: In this study, direct detection of fluazinam was realized using a fluorescent sensor using disulfide quantum dots (MoS2 QDs) via inner filter effect (IFE). The maximum excitation of as-prepared MoS2 QDs presented a complementary spectral-overlap… read more here.
Keywords: mos2 qds; based sensor; qds; fluazinam detection ... See more keywords
Ultra-sensitive and fast response formaldehyde sensor based on La2O3-In2O3 beaded nanotubes at low temperature
Sign Up to like & getrecommendations! Published in 2020 at "Chemical Physics Letters"
DOI: 10.1016/j.cplett.2020.137289
Abstract: Abstract La2O3-In2O3 composited beaded nanotubes (LIBNTs) and pure In2O3 nanotubes (INTs) were fabricated via a simple electrospinning method. By means of SEM, XRD and XPS analysis, we determined the surface structure, crystal phase and chemical… read more here.
Keywords: temperature; la2o3 in2o3; response; beaded nanotubes ... See more keywords
A colorimetric and fluorometric oligothiophene-indenedione-based sensor for rapid and highly sensitive detection of cyanide in real samples and bioimaging in living cells
Sign Up to like & getrecommendations! Published in 2019 at "Dyes and Pigments"
DOI: 10.1016/j.dyepig.2018.12.057
Abstract: Abstract A new simple oligothiophene-indenedione-based sensor 3TI has been synthesized for the highly reactive and selective detection of cyanide anion (CN−) in 70% aqueous media. The sensor 3TI displays distinct colorimetric and fluorometric detection of… read more here.
Keywords: indenedione; oligothiophene indenedione; based sensor; detection cyanide ... See more keywords
Observer-based Sensor Fault Detectability: About Robust Positive Invariance Approach and Residual Sensitivity
Sign Up to like & getrecommendations! Published in 2017 at "IFAC-PapersOnLine"
DOI: 10.1016/j.ifacol.2017.08.926
Abstract: Abstract This paper considers detectability of deviation of sensors from their nominal behavior for a class of linear time-invariant discrete-time systems in the presence of bounded additive uncertainties. Detectable sensor faults using interval observers are… read more here.
Keywords: fault; observer based; sensitivity; based sensor ... See more keywords
Design and study of a metamaterial based sensor for the application of liquid chemicals detection
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Research and Technology"
DOI: 10.1016/j.jmrt.2020.07.034
Abstract: Abstract The detection of chemical samples having close dielectric response is a big challenge as the detection principle is driven by the variations in the dielectric parameters of the investigated samples. In the current work,… read more here.
Keywords: chemicals detection; mhz; metamaterial based; based sensor ... See more keywords
Novel Paraquat Detection Strategy Enabled by Carboxylatopillar[5]arene Confined in Nanochannels on a Paper-Based Sensor.
Sign Up to like & getrecommendations! Published in 2022 at "Analytical chemistry"
DOI: 10.1021/acs.analchem.2c04586
Abstract: Paper-based optical sensors have emerged as a promising technology for pesticide detection and attracted extensive attention. However, in practical analytical applications, it may suffer from limited sensitivity with traditional signal amplification strategies. Here, we developed… read more here.
Keywords: paper based; carboxylatopillar arene; detection; based sensor ... See more keywords
Long‐Term Support Is Needed for Crucial Ground‐Based Sensor Networks
Sign Up to like & getrecommendations! Published in 2023 at "Space Weather"
DOI: 10.1029/2023sw003529
Abstract: Recently, many in the space weather community have taken up the cause to advocate for an orphan among our own. It’s an important fight—for ground‐based sensor networks. Although ground‐based sensors are used across all disciplines… read more here.
Keywords: long term; ground based; space weather; ground ... See more keywords
Fabrication of a graphene-based sensor to detect the humidity and the temperature of a metal body with imprecise data analysis
Sign Up to like & getrecommendations! Published in 2022 at "RSC Advances"
DOI: 10.1039/d2ra03474c
Abstract: Graphene is a 2D material with remarkable properties. The present study demonstrates the fabrication of a graphene-based sensor for measuring the temperature and humidity of a metal body. The graphene sensor was fabricated by depositing… read more here.
Keywords: metal body; graphene; temperature; based sensor ... See more keywords
The influence of different metal atoms on the performance of metalloporphyrin-based sensor reaction with propanol
Sign Up to like & getrecommendations! Published in 2020 at "Materials Technology"
DOI: 10.1080/10667857.2020.1800295
Abstract: ABSTRACT Density functional theory (DFT) method was carried out to investigate the molecular interaction between metalloporphyrin-based sensor and propanol. The relative energies were used to determine the most stable state of metalloporphyrin and its complexes… read more here.
Keywords: exposure propanol; metalloporphyrin based; porphyrin; based sensor ... See more keywords