Electrochemical Behavior of Mg-Al-Zn-Ga Alloy as Anode Materials in 3.5 wt.% NaCl Solution
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-018-3635-9
Abstract: The microstructure and electrochemical behaviors of Mg-Al-Zn and Mg-Al-Zn-Ga alloys as anode materials were investigated by morphology observation, composition analysis, phase identification, and electrochemical tests. The experimental results suggest that Ga alloying can refine the… read more here.
Keywords: electrochemical behavior; alloy; anode materials; behavior alloy ... See more keywords
Improvement in Corrosion Behavior of Al–Ti Alloy by Adding 2 wt% Magnesia and 1 wt% Silicon Carbide
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Bio- and Tribo-Corrosion"
DOI: 10.1007/s40735-017-0098-8
Abstract: Aluminum building wire wastes were used to produce Al alloy by adding 4 wt% of titanium. Also, aluminum matrix composite was fabricated by adding 2 wt% MgO–1 wt% SiC to investigate the corrosion behavior of Al–Ti alloy and… read more here.
Keywords: alloy; heat treatments; corrosion; behavior alloy ... See more keywords
Tribocorrosion Behavior of Ti–Cu Alloy in Hank’s Solution for Biomedical Application
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Bio- and Tribo-Corrosion"
DOI: 10.1007/s40735-018-0142-3
Abstract: Ti–Cu alloy has shown potential biomedical application due to its high strength, good corrosion resistance, good machinability, good biocompatibility and strong antibacterial properties. In this paper, the tribocorrosion behavior of Ti–Cu was investigated in comparison… read more here.
Keywords: tribocorrosion behavior; behavior alloy; alloy hank; biomedical application ... See more keywords
Effects of O2− additive on corrosion behavior of Fe–Cr–Ni alloy in molten fluoride salts
Sign Up to like & getrecommendations! Published in 2019 at "Corrosion Science"
DOI: 10.1016/j.corsci.2019.01.040
Abstract: Abstract Corrosion behavior of 316 stainless steel (316SS) was studied in molten FLINAK and FLINAK + O2− salts at 650 °C by weight loss measurement, electrochemical methods and characterization techniques including scanning electron microscopy (SEM), X-Ray diffraction (XRD),… read more here.
Keywords: corrosion behavior; additive corrosion; effects additive; behavior alloy ... See more keywords
Effect of cold work on the stress corrosion cracking behavior of Alloy 690 in supercritical water environment
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Nuclear Materials"
DOI: 10.1016/j.jnucmat.2017.10.003
Abstract: Abstract The stress corrosion cracking (SCC) behavior of Alloy 690 with 0, 20% and 30% cold work (CW) was studied in supercritical water (SCW) environment with an emphasis on CW and creep on the CGRs… read more here.
Keywords: corrosion cracking; alloy 690; stress corrosion; behavior alloy ... See more keywords
Isothermal martensitic transformation behavior of Ti–Nb–O alloy
Sign Up to like & getrecommendations! Published in 2019 at "Materials Letters"
DOI: 10.1016/j.matlet.2019.126691
Abstract: Abstract The isothermal martensitic transformation (IMT) behavior of Ti–20Nb–0.7O (mol %) alloy was investigated via X-ray diffractometry. Isothermal formation of the α″ martensite phase was observed, and the activation energy was determined using the time-temperature-transformation… read more here.
Keywords: alloy; transformation; martensitic transformation; behavior alloy ... See more keywords
A unified constitutive model for multiphase precipitation and multi-stage creep ageing behavior of Al-Li-S4 alloy
Sign Up to like & getrecommendations! Published in 2021 at "Transactions of Nonferrous Metals Society of China"
DOI: 10.1016/s1003-6326(21)65573-5
Abstract: A unified constitutive model is presented to predict the recently observed “multi-stage” creep behavior of Al−Li−S4 alloy. The corresponding microstructural variables related to the yield strength and creep deformation of the alloy during the creep… read more here.
Keywords: model; behavior alloy; stage creep; multi stage ... See more keywords
Corrosion Behavior of Al–Mg–Zn-Si Alloy Matrix Composites Reinforced with Y2O3 in 3.5% NaCl Solution
Sign Up to like & getrecommendations! Published in 2017 at "International Journal of Electrochemical Science"
DOI: 10.20964/2017.08.59
Abstract: The corrosion behavior of the Al-Mg-Zn-Si composite reinforced with Y2O3 particles and the unreinforced Al-Mg-Zn-Si alloy was studied through electrochemical and surface analysis techniques. The samples were manufactured by the Mechanical alloying (MA) technique and… read more here.
Keywords: alloy; matrix; corrosion; reinforced y2o3 ... See more keywords
The Precipitation Behavior of a Cu-Ni-Si Alloy with Cr Addition Prepared by Heating-Cooling Combined Mold (HCCM) Continuous Casting
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15134521
Abstract: A Cu-Ni-Si alloy containing (Ni + Si) ≥ 5 wt.%, with the addition of Cr, is fabricated by HCCM continuous casting and two steps of aging treatment. The evolution of the microstructures and precipitations, as… read more here.
Keywords: addition; behavior alloy; hccm continuous; precipitation behavior ... See more keywords