Application of Acoustic Emission Technology for Quantitative Characterization of Plasma-Sprayed Coatings Subjected to Bending Fatigue Tests
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-018-0750-y
Abstract: Plasma-sprayed coatings are widely used in industry, e.g., in applications subject to high wear and corrosion damage, or requiring thermal insulation. However, the failure behavior of such coatings has a great influence on the service… read more here.
Keywords: plasma; acoustic emission; plasma sprayed; bending fatigue ... See more keywords
Experimental and artificial neural network ANN investigation of bending fatigue behavior of glass fiber/polyester composite shafts
Sign Up to like & getrecommendations! Published in 2018 at "Journal of the Brazilian Society of Mechanical Sciences and Engineering"
DOI: 10.1007/s40430-018-1098-4
Abstract: This study includes an experimental investigation for rotating bending fatigue in five types of composite material shaft with comparison to a standard type made of pure polyester material. In addition, an artificial neural network ANN… read more here.
Keywords: type; glass; bending fatigue; fatigue behavior ... See more keywords
Improved very high cycle bending fatigue behavior of Ni microbeams with Au coatings
Sign Up to like & getrecommendations! Published in 2018 at "Acta Materialia"
DOI: 10.1016/j.actamat.2018.09.037
Abstract: Abstract This work investigated the effect of an 850-nm-thick electroplated Au coating on the very high cycle bending fatigue behavior of electroplated Ni microbeams tested under resonance in air at high frequencies (∼9 kHz). The S… read more here.
Keywords: high cycle; bending fatigue; cycle bending; fatigue behavior ... See more keywords
Quasi-static three-point bending and fatigue behavior of 3-D orthogonal woven composites
Sign Up to like & getrecommendations! Published in 2019 at "Composites Part B: Engineering"
DOI: 10.1016/j.compositesb.2018.09.077
Abstract: Abstract 3-D orthogonal woven composites (3DOWC) have attracted great attention in the industrial and civil fields, due to their excellent mechanical properties. However, due to the mutual perpendicular yarns in three directions, its mechanical properties… read more here.
Keywords: point bending; orthogonal woven; bending fatigue; three point ... See more keywords
Analytical approach for low and high cycle bending fatigue life prediction of carburized gear steel specimens
Sign Up to like & getrecommendations! Published in 2020 at "Engineering Failure Analysis"
DOI: 10.1016/j.engfailanal.2019.104328
Abstract: Abstract Bending fatigue is one of the most common failure modes in spur gears. In carburized spur gears, subsurface failure initiation is characteristic for the high cycle fatigue regime, which is rather hard to detect… read more here.
Keywords: fatigue life; fatigue; bending fatigue; approach ... See more keywords
Stress and fracture surface analysis of uncoated and coated 7075-T6 specimens under the rotating bending fatigue loading
Sign Up to like & getrecommendations! Published in 2020 at "Engineering Failure Analysis"
DOI: 10.1016/j.engfailanal.2020.104512
Abstract: Abstract The 7075-aluminum alloy is often used in aerospace, automotive, and maritime sectors owing to its high strength-to-weight ratio. Application of Physical Vapor Deposition (PVD) coating has proved to increase tribological properties and corrosion resistance.… read more here.
Keywords: fracture; analysis; rotating bending; bending fatigue ... See more keywords
Enhanced bending fatigue resistance of a 50CrMnMoVNb spring steel with decarburized layer by surface spinning strengthening
Sign Up to like & getrecommendations! Published in 2019 at "International Journal of Fatigue"
DOI: 10.1016/j.ijfatigue.2019.03.014
Abstract: Abstract Surface decarburization directly influences the service performance of spring steel, which is an important scientific issue. The bending fatigue behavior of 50CrMnMoVNb spring steel with surface decarburization as well as treated by surface spinning… read more here.
Keywords: spring steel; bending fatigue; surface;
High-temperature bending fatigue properties of oxide dispersion-strengthened platinum–rhodium alloy under high axial stress
Sign Up to like & getrecommendations! Published in 2020 at "International Journal of Fatigue"
DOI: 10.1016/j.ijfatigue.2019.105385
Abstract: Abstract In this study, high-temperature bending fatigue tests were carried out using an oxide dispersion-strengthened platinum-rhodium alloy at 1400 °C with a relatively high axial stress. At a low stress amplitude, creep damage progressed throughout the… read more here.
Keywords: axial stress; temperature bending; high temperature; bending fatigue ... See more keywords
A rotating gear test methodology for evaluation of high-cycle tooth bending fatigue lives under fully reversed and fully released loading conditions
Sign Up to like & getrecommendations! Published in 2020 at "International Journal of Fatigue"
DOI: 10.1016/j.ijfatigue.2019.105432
Abstract: Abstract Gear bending fatigue life is a primary consideration in gear design. Each gear tooth is subjected to cyclic root stresses that may cause fatigue fracture. A gear in a transmission is subjected to either… read more here.
Keywords: methodology; fatigue; fatigue lives; bending fatigue ... See more keywords
Graded deformation in an Fe-Mn-Al-C steel under bending fatigue
Sign Up to like & getrecommendations! Published in 2020 at "Materials Letters"
DOI: 10.1016/j.matlet.2020.129002
Abstract: Abstract Cyclic behavior of a high-Mn austenitic steel with fine (~2 µm) and larger (~5 µm) grains was investigated under high-cycle bending fatigue at room temperature. Microhardness initially increased as a sign of cyclic hardening… read more here.
Keywords: deformation steel; graded deformation; steel bending; bending fatigue ... See more keywords
Effect of High Porosity on Bending Fatigue Properties of 3D Printed AISI 316L Steel
Sign Up to like & getrecommendations! Published in 2019 at "Procedia Manufacturing"
DOI: 10.1016/j.promfg.2019.08.006
Abstract: Abstract Selective laser melting (SLM) is an effective way to produce optimized metallic parts in relatively short through-put times for various applications. The microstructure of SLM-manufactured metals is affected by the melting parameters applied, namely… read more here.
Keywords: porosity; surface; effect; bending fatigue ... See more keywords