LAUSR

About LAUSR
Donate
Contact Us

Follow us:

You are not signed in:

Sign Up!


   Articles with "bending strength" as a keyword



Enhanced mechanical property of Ca5(PO4)2SiO4 bioceramic by a biocompatible sintering aid of zinc oxide

Sign Up to like & get
recommendations! Published in 2018 at "Ceramics International"

DOI: 10.1016/j.ceramint.2018.07.051

Abstract: Abstract In the present work, a biocompatible additive ZnO was used to enhance the sintering of calcium phosphate silicate (CPS) 1 bioceramic and improve its mechanical property. Sol-gel prepared CPS powders were mechanically mixed with… read more here.

Keywords: cps bioceramics; bending strength; zno; enhanced mechanical ... See more keywords

Mechanical properties of alumina/zirconia composites

Sign Up to like & get
recommendations! Published in 2020 at "Ceramics International"

DOI: 10.1016/j.ceramint.2019.09.068

Abstract: Abstract Fracture toughness, bending strength, Young's modulus, hardness and subcritical crack growth were determined for six different alumina/zirconia composites. The bending strength was modelled using Weibull distribution. The fracture toughness, bending strength and resistance to… read more here.

Keywords: bending strength; alumina zirconia; zirconia composites; mechanical properties ... See more keywords

Effects of SDBS and ZrO2 additives on the microstructure and properties of silicon-bonded SiC porous ceramics

Sign Up to like & get
recommendations! Published in 2020 at "Ceramics International"

DOI: 10.1016/j.ceramint.2019.09.285

Abstract: Abstract Porous silicon-bonded silicon carbide (SBSC) ceramics were prepared under argon atmosphere, with silicon as pore former and bonding material, simultaneously, sodium dodecyl benzene sulfonate (SDBS) and ZrO2 as sintering additives, the effects of SDBS… read more here.

Keywords: sdbs zro2; effects sdbs; bending strength; silicon bonded ... See more keywords

Role of h-BN content on microstructure and mechanical properties of hot-pressed ZrB2–SiC composites

Sign Up to like & get
recommendations! Published in 2020 at "Ceramics International"

DOI: 10.1016/j.ceramint.2020.05.255

Abstract: Abstract The addition of h-BN flacks (0–35 vol%) into the ZrB2–SiC composites was investigated in the present research. The composites were consolidated at a temperature of 1800 °C for 1 h under 40 MPa uniaxial pressure by a hot-pressing… read more here.

Keywords: hot pressed; bending strength; role content; zrb2 sic ... See more keywords

Bending strength of CFRP laminated adhesive joints fabricated by vacuum-assisted resin transfer molding

Sign Up to like & get
recommendations! Published in 2019 at "Composites Part B: Engineering"

DOI: 10.1016/j.compositesb.2018.08.041

Abstract: Abstract The laminated joints used in this work were adhesive joints constructed using two dry carbon fiber halves. Some improvements were introduced to the joints to enhance their bending strength performance: stitching of the two… read more here.

Keywords: adhesive joints; strength; bending strength; carbon fiber ... See more keywords

An investigation of repair methods for delaminated composite laminate under flexural load

Sign Up to like & get
recommendations! Published in 2019 at "Composite Structures"

DOI: 10.1016/j.compstruct.2019.02.037

Abstract: Abstract The delamination failure of a composite laminate under a flexural load was repaired by micro-bolts and adhesive resin. The specimens were made by autoclave processing, and in the prepreg-stacking step, a Teflon release film… read more here.

Keywords: composite laminate; flexural load; bending strength; laminate flexural ... See more keywords

Mechanical bending strength of (Bi0.5Na0.5) TiO3-based lead-Free piezoelectric ceramics

Sign Up to like & get
recommendations! Published in 2017 at "Journal of Asian Ceramic Societies"

DOI: 10.1016/j.jascer.2017.03.002

Abstract: Abstract (Bi0.5Na0.5)TiO3 [BNT] is expected as one of candidate lead-free materials because these ceramics show relatively good high-power piezoelectric properties. In this study, we tried to understand the bending strength and fracture behavior of the… read more here.

Keywords: bi0 5na0; strength; lead free; bending strength ... See more keywords

Tensile and Bending Strength Analysis of Ramie Fiber and Woven Ramie Reinforced Epoxy Composite

Sign Up to like & get
recommendations! Published in 2020 at "Journal of Natural Fibers"

DOI: 10.1080/15440478.2020.1726242

Abstract: This study aims to analyze the effect of the number of woven ramie layers (plies) and ramie fiber weight as reinforcement of composite on the tensile strength and bending strength. The woven ramie ... read more here.

Keywords: composite tensile; ramie fiber; bending strength; woven ramie ... See more keywords
Photo from wikipedia

Enhancement of bending strength properties of two wood species reinforced with two types of carbon fibre fabrics and two layouts

Sign Up to like & get
recommendations! Published in 2020 at "International Wood Products Journal"

DOI: 10.1080/20426445.2020.1729497

Abstract: ABSTRACT This work examined the enhancement of bending strength properties of two wood species, namely fir and pine, reinforced with two carbon fibre fabrics (CFF) of different areal weight, in two different layouts. CFF applied… read more here.

Keywords: two wood; bending strength; strength properties; enhancement bending ... See more keywords

Effect of Y2O3 on thermophysical parameters and mechanical properties of Al-Al2O3 composites and compatibility with high temperature Al-Si alloys

Sign Up to like & get
recommendations! Published in 2024 at "Materials Research Express"

DOI: 10.1088/2053-1591/ad7cca

Abstract: Al-Al2O3 is a crucial encapsulation composite used in solar thermal storage systems. This study utilized Al and Al2O3 powders as raw materials, with Y2O3 serving as a sintering aid, to prepare Al-20Al2O3-xY2O3 composites (x =… read more here.

Keywords: mechanical properties; compatibility; bending strength; parameters mechanical ... See more keywords

Prediction of bending strength in ECC-RC composite beams using machine learning-based models

Sign Up to like & get
recommendations! Published in 2025 at "International Journal of Structural Integrity"

DOI: 10.1108/ijsi-11-2024-0186

Abstract: PurposeThe engineered cementitious composite (ECC)-reinforced concrete (RC) composite beam is an innovative structure, and its design and implementation rely on little experimental data. The machine learning (ML) technique, as an adjunct, can efficiently broaden the… read more here.

Keywords: beam; bending strength; ecc composite; prediction ... See more keywords