Articles with "binary alloy" as a keyword



Photo from wikipedia

Defining a Materials Database for the Design of Copper Binary Alloy Catalysts for Electrochemical CO2 Conversion.

Sign Up to like & get
recommendations!
Published in 2018 at "Advanced materials"

DOI: 10.1002/adma.201704717

Abstract: While Cu electrodes are a versatile material in the electrochemical production of desired hydrocarbon fuels, Cu binary alloy electrodes are recently proposed to further tune reaction directionality and, more importantly, overcome the intrinsic limitation of… read more here.

Keywords: binary alloy; alloy; co2 conversion; alloy catalysts ... See more keywords
Photo from wikipedia

Composition evolution and coalescence behavior of titanium oxide particles in Iron-Nickel binary alloy melt

Sign Up to like & get
recommendations!
Published in 2019 at "Journal of Materials Science"

DOI: 10.1007/s10853-019-03458-z

Abstract: Particle coalescence refers to the dispersed particles in a suspension sticking to each other through the random collisions. This phenomenon is of vital importance for the process control and mechanical property of the metallic materials,… read more here.

Keywords: binary alloy; coalescence; iron nickel; particle ... See more keywords
Photo by hope_house_press_leather_diary_studio from unsplash

Coexistence of ferromagnetism and superconductivity in NiBi-binary alloy

Sign Up to like & get
recommendations!
Published in 2019 at "Chinese Journal of Physics"

DOI: 10.1016/j.cjph.2019.05.029

Abstract: Abstract We investigate the effects of the antiferromagnetic exchange coupling between the Nickel and Bismuth2 atoms (Jint2 read more here.

Keywords: coexistence ferromagnetism; superconductivity nibi; nibi binary; ferromagnetism superconductivity ... See more keywords
Photo from wikipedia

Investigation of the passive behavior of a Ni–Cr binary alloy using successive electrochemical impedance measurements

Sign Up to like & get
recommendations!
Published in 2020 at "Electrochimica Acta"

DOI: 10.1016/j.electacta.2020.136531

Abstract: Abstract The passive behavior of a Ni–20Cr binary alloy was studied using an original methodology, based on successive electrochemical impedance spectroscopy (SEIS), over a wide potential range. The proposed method was first validated by comparing… read more here.

Keywords: binary alloy; alloy; successive electrochemical; electrochemical impedance ... See more keywords
Photo from wikipedia

A model for predicting the effects of buoyancy driven convection on solidification of binary alloy with nanoparticles

Sign Up to like & get
recommendations!
Published in 2022 at "International Journal of Heat and Mass Transfer"

DOI: 10.1016/j.ijheatmasstransfer.2021.121916

Abstract: Abstract Convection during the solidification of a binary alloy with nanoparticles governs the nanoparticle, species and temperature distribution in the domain and thus the solidification rate and morphology. Hence, a numerical model to predict the… read more here.

Keywords: binary alloy; nanoparticle; convection; solidification ... See more keywords
Photo from wikipedia

Creep behaviors of a highly concentrated Mg-18 wt%Gd binary alloy with and without artificial aging

Sign Up to like & get
recommendations!
Published in 2019 at "Journal of Alloys and Compounds"

DOI: 10.1016/j.jallcom.2018.10.013

Abstract: Abstract In this work, a highly concentrated Mg-18 wt%Gd binary alloy was prepared and its tensile creep behaviors were studied. Both as-solution (AS) and as-aged (AA) samples were subjected to creep tests at 523 K under various… read more here.

Keywords: artificial aging; creep behaviors; highly concentrated; binary alloy ... See more keywords
Photo from wikipedia

Effect of extrusion speed on microstructure and mechanical properties of the Mg-Ca binary alloy

Sign Up to like & get
recommendations!
Published in 2020 at "Journal of Magnesium and Alloys"

DOI: 10.1016/j.jma.2020.05.011

Abstract: Abstract This work reported the effect of extrusion speeds on the microstructures and mechanical properties of Mg-Ca binary alloy. The results showed that yield strength of the as-extruded Mg-1.2 wt.% Ca alloys decrease from ∼ 360 MPa… read more here.

Keywords: binary alloy; effect extrusion; speed; properties binary ... See more keywords
Photo by matreding from unsplash

Investigation of a Ti–30Zr binary alloy fabricated through spark plasma sintering

Sign Up to like & get
recommendations!
Published in 2020 at "Journal of materials research and technology"

DOI: 10.1016/j.jmrt.2020.03.110

Abstract: Abstract A series of Ti–30Zr alloys have been synthesized by the spark plasma sintering (SPS) process using a mixture of elemental powders processed by mechanical alloying. A sintering temperature of 900 °C was used during SPS… read more here.

Keywords: binary alloy; plasma sintering; 30zr binary; spark plasma ... See more keywords
Photo from wikipedia

Multi-GPU implementation of a cellular automaton model for dendritic growth of binary alloy

Sign Up to like & get
recommendations!
Published in 2021 at "Journal of materials research and technology"

DOI: 10.1016/j.jmrt.2021.07.095

Abstract: Abstract A parallel three-dimensional (3D) cellular automaton (CA) model is developed for dendritic growth simulation during solidification of binary alloy. The CA model is implemented using the graphic processing unit (GPU). Compute Unified Device Architecture… read more here.

Keywords: growth; model; cellular automaton; binary alloy ... See more keywords
Photo by a2_foto from unsplash

Emergence of uranium moment in U Pd1− binary alloy: An ab initio investigation

Sign Up to like & get
recommendations!
Published in 2019 at "Solid State Communications"

DOI: 10.1016/j.ssc.2018.12.005

Abstract: Abstract We present first principles calculations of electronic structure and magnetic moment formation of binary UxPd1−x as a function of x. The calculations have been performed within local density approximation of the density functional theory… read more here.

Keywords: emergence uranium; moment; moment pd1; binary alloy ... See more keywords
Photo by testalizeme from unsplash

Dynamic Precipitation in a Binary Mg-Al Alloy During Equal Channel Angular Extrusion (ECAE)

Sign Up to like & get
recommendations!
Published in 2018 at "Microscopy and Microanalysis"

DOI: 10.1017/s1431927618011595

Abstract: Precipitation hardening is one of most effective ways to strengthen magnesium alloys [1]. Conventional static aging in Mg-Al alloys produces precipitates which are dominated by high aspect-ratio plates or laths that inhabit the basal planes… read more here.

Keywords: binary alloy; precipitation binary; dynamic precipitation; alloy equal ... See more keywords