Sintering of 3D-printed aluminum specimens from the slurry-based binder jetting process
Sign Up to like & getrecommendations! Published in 2024 at "Progress in Additive Manufacturing"
DOI: 10.1007/s40964-024-00657-2
Abstract: This work investigates a novel method of producing complex-shaped aluminum parts by slurry-based binder jetting and sintering. In this process, a green body is built up by layer-wise deposition of an aqueous aluminum suspension and… read more here.
Keywords: aluminum; process; based binder; slurry based ... See more keywords
Powder bed binder jetting additive manufacturing of silicone structures
Sign Up to like & getrecommendations! Published in 2018 at "Additive manufacturing"
DOI: 10.1016/j.addma.2018.02.017
Abstract: Abstract The feasibility of a hybrid additive manufacturing (AM) method combining material extrusion and powder bed binder jetting (PBBJ) techniques for fabrication of structures made of silicone (polysiloxane) is investigated in this paper. A full… read more here.
Keywords: silicone; powder bed; bed binder; binder jetting ... See more keywords
Manufacturing of gypsum–sisal fiber composites using binder jetting
Sign Up to like & getrecommendations! Published in 2019 at "Additive Manufacturing"
DOI: 10.1016/j.addma.2019.100789
Abstract: Abstract Among additive manufacturing (AM) technologies, binder jetting (BJ) produces workpieces that could be used in a great variety of applications, such as decorative parts, prototypes, foundry molds, bone implants, and others. This technique includes… read more here.
Keywords: sisal; strength; binder jetting; gypsum sisal ... See more keywords
Additive manufacturing of thin alumina ceramic cores using binder-jetting
Sign Up to like & getrecommendations! Published in 2019 at "Additive Manufacturing"
DOI: 10.1016/j.addma.2019.100802
Abstract: ABSTRACT Binder-jetting, an additive manufacturing process and relatively low-cost technology is utilized to deposit complex-shaped thin ceramic cores. In this study, for enhancing sintering quality, a decomposable binder was prepared using binder-jetting by dispersing different… read more here.
Keywords: zbc; binder; ceramic cores; additive manufacturing ... See more keywords
Effect of fine powder particles on quality of binder jetting parts
Sign Up to like & getrecommendations! Published in 2020 at "Additive manufacturing"
DOI: 10.1016/j.addma.2020.101587
Abstract: Abstract Despite their desired effects on quality metrics of powder metallurgy parts, fine powder materials are rarely used in powder-based additive manufacturing as powder feedstock materials due to their poor flowability and inefficient layer recoating.… read more here.
Keywords: quality; fine powder; binder jetting; process ... See more keywords
Binder jetting additive manufacturing of hydroxyapatite powders: Effects of adhesives on geometrical accuracy and green compressive strength
Sign Up to like & getrecommendations! Published in 2020 at "Additive manufacturing"
DOI: 10.1016/j.addma.2020.101645
Abstract: Abstract Binder jetting additive manufacturing (AM) is a promising process to print hydroxyapatite (HA) powder into bone tissue implants. However, one challenge remaining is the poor reactivity between HA powder with standard water-based ink. This… read more here.
Keywords: geometrical accuracy; binder; powder; additive manufacturing ... See more keywords
Coatability of diamond-like carbon on 316L stainless steel printed by binder jetting
Sign Up to like & getrecommendations! Published in 2021 at "Additive manufacturing"
DOI: 10.1016/j.addma.2021.102064
Abstract: Abstract Diamond-like carbon (DLC) coatings are efficient in improving surface properties of functional components and parts. For conventionally manufactured materials and products, the DLC coatings are on a high level of development and industrially well… read more here.
Keywords: diamond like; like carbon; residual porosity; dlc ... See more keywords
Mechanical anisotropy and fracture mode of binder jetting 3D printed calcium sulfate moldings
Sign Up to like & getrecommendations! Published in 2021 at "Applied Materials Today"
DOI: 10.1016/j.apmt.2021.101160
Abstract: Abstract Binder jet three-dimensional (3D) printing has been extensively developed since the early 1990s and is widely applied in various industrial fields. Binder jetting 3D-printed products have anisotropic mechanical properties; however, no study has provided… read more here.
Keywords: calcium sulfate; binder jetting; fracture; mechanical anisotropy ... See more keywords
Selective recrystallization of cellulose composite powders and microstructure creation through 3D binder jetting.
Sign Up to like & getrecommendations! Published in 2018 at "Carbohydrate polymers"
DOI: 10.1016/j.carbpol.2018.07.064
Abstract: Binder jetting is an additive manufacturing technique in which powdered material is sequentially laid down and printed on by an ink binder, in a selective manner, to form a 3D object. Unfortunately work in this… read more here.
Keywords: cellulose composite; recrystallization cellulose; selective recrystallization; binder jetting ... See more keywords
Binder jetting of ceramics: Powders, binders, printing parameters, equipment, and post-treatment
Sign Up to like & getrecommendations! Published in 2019 at "Ceramics International"
DOI: 10.1016/j.ceramint.2019.04.012
Abstract: Abstract Binder jetting is expected to become the universal process for preparing ceramic parts because it can overcome multiple problems, such as the difficulty to prepare complex-shaped ceramic parts and the shrinkage of the sintering… read more here.
Keywords: process; binder; post treatment; equipment post ... See more keywords
Binder jetting additive manufacturing of silicon carbide ceramics: Development of bimodal powder feedstocks by modeling and experimental methods
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.04.098
Abstract: Abstract A limitation of binder jetting additive manufacturing is the low density of fabricated parts. Mixing powders with different sizes is a promising approach to increase powder bed packing density and, hence, printed part density.… read more here.
Keywords: powder; bimodal powder; silicon carbide; binder jetting ... See more keywords