Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2021 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202001537
Abstract: Reverse offset printing (ROP) is receiving increasing attention as an emerging technology for printed electronics due to its rapid, environment‐friendly fabrication processes. A tunable ROP process is proposed by exploiting the controlled elastic deformation of…
read more here.
Keywords:
reverse offset;
stretchable blanket;
printed electronics;
blanket ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2020 at "International Journal of Energy Research"
DOI: 10.1002/er.5555
Abstract: Helium cooled dual breeder (HCDB) blanket concept is designed for Indian DEMO fusion reactor and it is made of two tritium breeder materials PbLi and Li2TiO3. It has helium as a coolant and the India…
read more here.
Keywords:
breeder;
indian demo;
blanket;
blanket concept ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2019 at "International Journal of Environmental Science and Technology"
DOI: 10.1007/s13762-019-02397-1
Abstract: This work proposes a sludge purging procedure from upflow anaerobic sludge blanket reactors in small wastewater treatment plants. The following characteristics of the anaerobic sludge supported its development: specific methanogenic activity, biodegradability and dewaterability. The…
read more here.
Keywords:
sludge blanket;
blanket;
sludge purging;
anaerobic sludge ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2018 at "Annals of Nuclear Energy"
DOI: 10.1016/j.anucene.2017.10.016
Abstract: Abstract The Seed-and-Blanket (SB it is few percent higher than that of the 2-stage PWR-ABR system. Approximately 7% of the thorium fed to the blanket is converted into energy, which makes the thorium fuel utilization…
read more here.
Keywords:
cycle analysis;
blanket;
thorium;
fuel ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2017 at "Catena"
DOI: 10.1016/j.catena.2016.11.025
Abstract: Abstract Many peatlands across the world suffer from degradation. Blanket peatlands are found mainly in high latitude oceanic areas and subpolar islands. Exacerbated erosion of blanket peatlands is common particularly where they have been disturbed…
read more here.
Keywords:
peat erosion;
blanket;
change;
erosion ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2017 at "Fusion Engineering and Design"
DOI: 10.1016/j.fusengdes.2016.12.013
Abstract: Abstract As one of the candidate tritium breeding blankets for Chinese Fusion Engineering Test Reactor (CFETR), a conceptual structure of the helium cooled solid breeder blanket has recently been proposed. The neutronic, thermal-hydraulic and mechanical…
read more here.
Keywords:
helium cooled;
breeder blanket;
thermal hydraulic;
blanket ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2017 at "Fusion Engineering and Design"
DOI: 10.1016/j.fusengdes.2017.01.050
Abstract: Abstract This paper presents the nuclear analysis of the European DEMO baseline 2015 with HCLL blanket carried out with the TRIPOLI-4® Monte Carlo code and the JEFF-3.2 nuclear data library. The TRIPOLI-4® model was imported…
read more here.
Keywords:
blanket;
nuclear analysis;
hcll blanket;
european demo ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2017 at "Fusion Engineering and Design"
DOI: 10.1016/j.fusengdes.2017.02.027
Abstract: Abstract Chinese Fusion Engineering Testing Reactor (CFETR) is aimed to obtain the technologies to fill the gaps between ITER and DEMO. The helium cooled ceramic breeder (HCCB) blanket is one of the candidates for CFETR.…
read more here.
Keywords:
study hccb;
blanket;
hccb blanket;
neutronics study ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2017 at "Fusion Engineering and Design"
DOI: 10.1016/j.fusengdes.2017.02.070
Abstract: Abstract ITER blanket modules must be handled remotely because the radiation levels inside the vacuum vessel after DT experiments will be too high to allow for hands-on access to the in-vessel components. Remote tools for…
read more here.
Keywords:
blanket;
alignment tool;
pipe alignment;
vessel ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2017 at "Fusion Engineering and Design"
DOI: 10.1016/j.fusengdes.2017.02.110
Abstract: Abstract Plasma facing components of tokamak reactors such as ITER or the Korean fusion demonstration reactor (K-DEMO) can be subjected to damage by plasma instabilities. Plasma disruptions like vertical displacement event (VDE) with high heat…
read more here.
Keywords:
module;
blanket;
analysis;
evaporation ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2017 at "Fusion Engineering and Design"
DOI: 10.1016/j.fusengdes.2017.03.118
Abstract: Abstract The design of complex and expensive fusion breeder blanket assemblies requires detailed engineering studies that rely upon nuclear analyses to determine essential operating parameters, including tritium production rate, nuclear heating and radiation damage. Lack…
read more here.
Keywords:
carlo method;
uncertainty;
blanket;
monte carlo ... See more keywords