LAUSR

About LAUSR
Donate
Contact Us

Follow us:

You are not signed in:

Sign Up!


   Articles with "bonded joints" as a keyword



Photo from wikipedia

Effect of strain-rate and moisture content on the mechanical properties of adhesively bonded joints

Sign Up to like & get
recommendations! Published in 2020 at "Journal of Mechanical Science and Technology"

DOI: 10.1007/s12206-020-0404-0

Abstract: Mechanical performance of polymer-based adhesive joints is susceptible to moisture absorption. In this respect, this study establishes a validated methodology for predicting the mechanical responses of adhesively bonded joints under strain rate-dependent and moisture conditions.… read more here.

Keywords: strain rate; bonded joints; moisture; adhesively bonded ... See more keywords

Effect of moisture on the adhesion of CFRP-to-steel bonded joints using peel tests

Sign Up to like & get
recommendations! Published in 2018 at "Journal of the Brazilian Society of Mechanical Sciences and Engineering"

DOI: 10.1007/s40430-017-0959-6

Abstract: In this work, an experimental study has been carried out to evaluate the effect of salt water condition on the long-term adhesion of composite-to-metal bonded joints using peel tests. A new test configuration is tested… read more here.

Keywords: bonded joints; joints using; peel tests; adhesion ... See more keywords

Thermomechanical characterization of Nano-Fe3O4 reinforced thermoplastic adhesives and single lap-joints

Sign Up to like & get
recommendations! Published in 2019 at "Composites Part B: Engineering"

DOI: 10.1016/j.compositesb.2019.107162

Abstract: Abstract In this work, Acrylonitrile Butadiene Styrene (ABS) was selected as the thermoplastic adhesive and reinforced with varying concentration of ferromagnetic nanoparticles (FMNP) through melt processing. The effect of FMNP content on thermo-mechanical properties was… read more here.

Keywords: lap joints; bonded joints; thermomechanical characterization; characterization nano ... See more keywords

Interface adhesion assessment of composite-to-metal bonded joints under salt spray conditions using peel tests

Sign Up to like & get
recommendations! Published in 2017 at "Composite Structures"

DOI: 10.1016/j.compstruct.2016.12.058

Abstract: An experimental study has been carried out to assess the adhesion quality of composite-to-metal bonded joints under salt spray ageing conditions. The tests were performed according to the ASTM standard of floating roller peel tests… read more here.

Keywords: bonded joints; salt spray; composite metal; adhesion ... See more keywords
Photo from wikipedia

Strength estimation of hybrid single-L bonded joints by the eXtended Finite Element Method

Sign Up to like & get
recommendations! Published in 2018 at "Composite Structures"

DOI: 10.1016/j.compstruct.2017.04.009

Abstract: Abstract High-strength composites are widely used in several industries, such as aeronautical, automotive and naval, and they can be combined with metals to provide significant advantages in structural design. The application of adhesive bonding to… read more here.

Keywords: finite element; strength; bonded joints; element method ... See more keywords

Fully probabilistic analysis of FRP-to-concrete bonded joints considering model uncertainty

Sign Up to like & get
recommendations! Published in 2018 at "Composite Structures"

DOI: 10.1016/j.compstruct.2017.11.058

Abstract: Abstract This work presents a full reliability-based analysis framework for fiber-reinforced polymer (FRP)-to-concrete bonded joints considering model uncertainty. Eight frequently used bond strength models for FRP-to-concrete bonded joints were calibrated by defining a model factor.… read more here.

Keywords: bonded joints; concrete bonded; analysis; model ... See more keywords
Photo from wikipedia

Using acoustic emissions (AE) to monitor mode I crack growth in bonded joints

Sign Up to like & get
recommendations! Published in 2020 at "Engineering Fracture Mechanics"

DOI: 10.1016/j.engfracmech.2019.106778

Abstract: Abstract The usual way to evaluate the fracture toughness of bonded joints is via experimental characterization of the critical strain energy release rate. Different test procedures and data reduction methods for mode I fracture characterization… read more here.

Keywords: bonded joints; growth bonded; mode crack; crack ... See more keywords

An updated review of adhesively bonded joints in composite materials

Sign Up to like & get
recommendations! Published in 2017 at "International Journal of Adhesion and Adhesives"

DOI: 10.1016/j.ijadhadh.2016.10.010

Abstract: Abstract Continuing interest and more developments in recent years indicated that it would be useful to update Banea and da Silva paper entitled “Adhesively bonded joints in composite materials: an overview”. This paper presents an… read more here.

Keywords: joints composite; bonded joints; adhesively bonded; review adhesively ... See more keywords

Influence of femtosecond laser treated surfaces on the mode I fracture toughness of carbon-epoxy bonded joints

Sign Up to like & get
recommendations! Published in 2018 at "International Journal of Adhesion and Adhesives"

DOI: 10.1016/j.ijadhadh.2018.01.005

Abstract: Abstract The influence of laser surface treatments on mode I fracture toughness of carbon fibre reinforced composites bonded joints is addressed in this work. Five different surface treatments considering several combinations of laser fluence and… read more here.

Keywords: bonded joints; fracture; toughness carbon; fracture toughness ... See more keywords

On the use of thermographic technique to assess the fatigue performance of bonded joints

Sign Up to like & get
recommendations! Published in 2018 at "International Journal of Adhesion and Adhesives"

DOI: 10.1016/j.ijadhadh.2018.02.016

Abstract: Abstract The thermographic technique is based on the heat released during dynamic loading cycles, correlating the temperature variation on specimen's surface with the applied stress amplitude. An abrupt temperature variation under a specific stress level… read more here.

Keywords: technique; bonded joints; thermographic technique; performance bonded ... See more keywords

Characterisation and FE simulation of polyurethane elastic bonded joints under multiaxial loading conditions

Sign Up to like & get
recommendations! Published in 2018 at "International Journal of Adhesion and Adhesives"

DOI: 10.1016/j.ijadhadh.2018.02.029

Abstract: Abstract Structural bonding with so-called elastic adhesives like polyurethane or silicone adhesives is increasingly being used for various applications in the automotive, transportation, and building industry. Elastic adhesives can bond dissimilar materials such as steel,… read more here.

Keywords: bonded joints; polyurethane; multi axial; elastic adhesives ... See more keywords