Interface Switchable Bonding Tailored Ruthenium Sites Unveil Ultralow Overpotentials for Hydrogen Evolution
Sign Up to like & getrecommendations! Published in 2024 at "Advanced Functional Materials"
DOI: 10.1002/adfm.202414758
Abstract: Controlling the electronic structure based on the valence state is key for effective electrocatalysis, and the challenge lies in attaining the optimal metal valence states. Here, a new approach called valence‐elastic control is introduced to… read more here.
Keywords: valence; switchable bonding; hydrogen evolution; bonding tailored ... See more keywords
Reinforcing Gelatin Hydrogels via In Situ Phase Separation and Enhanced Interphase Bonding for Advanced 3D Fabrication
Sign Up to like & getrecommendations! Published in 2024 at "Advanced Materials"
DOI: 10.1002/adma.202416432
Abstract: Gelatin hydrogels (e.g., methacrylated gelatin gel, abbreviated GelMA gel) have garnered significant attention in tissue engineering and therapeutic drug and cell delivery due to their complete degradability and intrinsic ability to support cell adhesion. However,… read more here.
Keywords: gelatin hydrogels; reinforcing gelatin; bonding; via situ ... See more keywords
Chemical bonding and hydrogen bonding facilitated higher interfacial interaction of PA6/BF/POSS composites
Sign Up to like & getrecommendations! Published in 2024 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.55936
Abstract: This work investigated the composites (PA6/BF) made of basalt fiber (BF) and nylon 6. To improve the interfacial bonding between the fibers and the polymer matrix, and to enhance the thermal and mechanical properties of… read more here.
Keywords: interfacial interaction; chemical bonding; poss; hydrogen bonding ... See more keywords
Electrochemical Bonding of Hydrogels at Rigid Surfaces
Sign Up to like & getrecommendations! Published in 2022 at "Small Methods"
DOI: 10.1002/smtd.202201132
Abstract: Flexible hydrogels can be chemically/physically bonded on soft surfaces. However, there is a lack of a facile method to build strong interfacial adhesion between hydrogel and various rigid surfaces. Herein, an electrochemical bonding protocol, which… read more here.
Keywords: adhesion; electrochemical bonding; hydrogel; bonding hydrogels ... See more keywords
Cost-effective and rapid prototyping of PMMA microfluidic device via polymer-assisted bonding
Sign Up to like & getrecommendations! Published in 2021 at "Microfluidics and Nanofluidics"
DOI: 10.1007/s10404-021-02466-3
Abstract: Microfluidic systems are relatively new technology field with a constant need of novel and practical manufacturing materials and methods. One of the main shortcomings of current methods is the inability to provide rapid bonding, with… read more here.
Keywords: polymer assisted; bonding strength; assisted bonding; polymer ... See more keywords
Experimental investigations in the intermetallic and microvoid formation in sub-200 °C Cu–Sn bonding
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-019-02017-1
Abstract: This paper reports the intermetallic growth and microvoid formation in the Cu–Sn layers, which were annealed at low temperatures (sub-200°C) for durations varying from 120 to 1440 min. A 10 µm thick tin was electrodeposited… read more here.
Keywords: bonding; sub 200; microvoid formation; within cu3sn ... See more keywords
Improving Erosion Resistance of Plasma-Sprayed Ceramic Coatings by Elevating the Deposition Temperature Based on the Critical Bonding Temperature
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-017-0633-7
Abstract: Interlamellar bonding within plasma-sprayed coatings is one of the most important factors dominating the properties and performance of coatings. The interface bonding between lamellae significantly influences the erosion behavior of plasma-sprayed ceramic coatings. In this… read more here.
Keywords: temperature; bonding; erosion; ceramic coatings ... See more keywords
First-principles structural, electronic, optical and bonding properties of scandium-based ternary indide system Sc5T2In4 (T = Ni, Pd, Pt)
Sign Up to like & getrecommendations! Published in 2020 at "Bulletin of Materials Science"
DOI: 10.1007/s12034-020-02251-y
Abstract: The structural, electronic and optical properties of rare-earth, scandium-based compounds within the family of RE 5 -T 2 -In 4 (T = Ni, Pd, Pt) intermetallics are calculated by using density functional theory-based orthogonalized linear… read more here.
Keywords: energy; structural electronic; bonding; scandium based ... See more keywords
First-principles calculations on the interface of the Al/TiC aluminum matrix composites
Sign Up to like & getrecommendations! Published in 2020 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2019.144502
Abstract: Abstract The Al-TiC composites with different TiC contents were synthesized by spark plasma sintering. The microstructure and tensile properties were investigated by the experimental tests. In order to theoretically clarify the properties of interface between… read more here.
Keywords: interface tic; bonding; calculations interface; principles calculations ... See more keywords
Direct bonding of silicon carbide with hydrofluoric acid treatment for high-temperature pressure sensors
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2019.10.123
Abstract: Abstract Direct bonding of single-crystal silicon carbide (SiC) is a critical process for the fabrication of pressure sensors used in harsh environments. In this paper, we present a direct bonding process with a surface treatment… read more here.
Keywords: treatment; bonding; direct bonding; hydrofluoric acid ... See more keywords
Preparation and mechanism of active Mo–Mn metallization on ZTA particles surface and interfacial bonding of reinforced iron matrix composite
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.03.147
Abstract: Abstract ZrO2 toughened Al2O3 particles (ZTAp) have poor wettability with iron, and therefore some defects are easily formed at the interface between ZTAp and iron matrix, which may lead to material failure. This paper illustrates… read more here.
Keywords: iron; bonding; iron matrix; active metallization ... See more keywords